Actualizaciones ATF Advance Turbo Flasher Cualquier Cometario Diferente A La Actualizacion Sera Borrado , Solo Actualizaciones Opciones

[SpLock]

ATF [Advance Turbo Flasher] Version 5.10 Update!! 07 May 2010!!

 5_1.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 230.14k ) Número de descargas: 2

[Anunciante Autorizado]

[SpLock]

ATF 5.60 Multi-USB Update!! 19 Aug 2010

ATF 5.60 Multi-USB Update


ATF Multi-USB Mode Flashing

Flash TWO BB5 Phones at the same time
The Phones can be different models or the same model
The Phones can be "DEAD" or "ALIVE"
This option saves you a lot of time and it is very EASY and SAFE to use

ATF USB Flashing uses the latest Flash Loaders and Flash Protocols
There is no need to select OBSOLETE "Old Protocols"/ "Old Loaders"
All New Phones are Supported



ATF USB RPL Backup


Creates RPL Backups for Supported Phones via USB
Supported Phones are ALL BB5 RAPUYAMA, RAP3Gv4 and BroadCom based Phones
No other 3rd Party Software in the world can do this




Unique USB Flash Procedure


ATF is rewriting the way USB Flashing is Done
ATF does not follow the Standard USB Flashing done by other Softwares
ATF uses a different approach to make USB Flashing SAFER and EASIER
Bulk ERASE and Bulk WRITE MODES are not used and this increases the
compatibility on the latest phones with 5 or more Flash Files especially
phones with ENO Packages.


General Updates:


Infineon Phone C1-00 RM-689 Now Fully Supported
BroadCom "USB Only" Phones Now Fully Supported
Update Important Files Button added for Minor Updates
Skin Resolution Increased
DCT4 Booting and FBUS Scanning was Improved



Who will buy this if you can get more in ATF?

 ATF.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 84.74k ) Número de descargas: 0


The Master Piece

 turbo.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 32.3k ) Número de descargas: 0

[SpLock]

ATF 5.70 Multi-ATF Box Update!! 25 Aug 2010!!

ATF 5.70 Multi-ATF Box Update!! 25 Aug 2010!!

Multi-ATF Box Flashing

Now you can use more than 1 ATF Box on 1 PC
The Number of Boxes is limited only with PC's Resources/Performance
So it is possible to connect 10, 20, 100 etc... Boxes if your PC can handle it
** We Strongly Suggest you should use a USB HUB with an External
** Power Adapter with about 2A or more Power to give.

 atf.JPG... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 265.97k ) Número de descargas: 0




[b]Descargar

Bugfixes:

[CNT Flashing S40 Fixed]
Missing Calculator, Themes and Other CNT Apps for S40 phones
are now fixed. We have tested 6300 and 3110c Phones.
In USB Flashing Mode, you can Force 128K CNT for DEAD USB Mode.
Only use this option if something is missing inside the Phone
after flashing. Otherwise, leave this option unchecked.

[User.ini Handling Fixed]
Files that cannot be found inside the default paths are now
accessible when saved inside the User.ini.
User selected files are saved inside User.ini and WILL NOT BE
overwritten with new installations above 5.60.

[GUI USB Disabled Fixed]
After selecting DCT4 and going back to BB5, the USB option is
again enabled.

Who will buy this if you can get more in ATF?

 fps.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 84.74k ) Número de descargas: 0


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

The Master Piece

 turbo.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 32.3k ) Número de descargas: 0

[karlitos210]

ATF 5.90 Update!! 27 OCT 10!!

--------------------------------------------------------------------------------

AdvanceBox Turbo Flasher v5.90




Change Logs:
New BB5 Loader Package Version 10.34.1.3
DCT4 RPL DATA1 is Backuped Automatically in First Instance of "Scan Phone"
Security Code read attempt during "Scan Phone"
Read Phone Mode on "Scan Phone"
Read Dynamic Camera Configuration on "Scan Phone"
Full Logs option for Booting BB5
Fixed DCT4 Local Mode on Live DCT4 Phones when First Connected to Box
Fixed DCT4 Long Boot
Autodetect and Autoswitch Between BB5 and DCT4 Products according to
Phone Connected
Software will always select the Highest Firmware available on your PC
Manual and Auto Detect of VCCIO Levels
Support for DCT4 "ini" Files which are older than DP Version 2.0
Quick Fix for SL1/SL2 Downgrade Fix
Fixed Default Directories for Manually Adding Flash Files
File System Format for BB5 Phones
Corrected SL3 Type Simlock Reading on Buscheck
Shows Deep Scan Info for BB5 Phones
Local Storage for Unique ID's Read from Supported Phones
Manual Erase Flash for BB5 Phones (NOR or NAND + CMT or APE)
Infineon New Loader Support
Fixed FBUS UART Reading/Writing with Better Timing
Improved Speed for BB5 USB Flashing on RAPUYAMA, RAP3Gv4 and
BroadCom Phones
New Phone Connectivity Drivers Included
Dynamic Camera Configuration Reading and Writing Fixed for non standard DCC Files

ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

Mensaje modificado por karlitos210 el Oct 27 2010, 11:37 AM

[romeo1]

Change Logs:

New LogiCore 8.15.10 Box Firmware (Must Update firmware in order to use v6.00)
New BB5 Loader Package Version 10.42.000.7
Added DCT4/DCT4+/DCT4++ RPL Server (FREE, NO NEED ACTIVATION)
Added DCT4 Manual Erase Option
Added Auto Selection of Flash Chip Size for Manual Erase
Fixed BB5 APE NAND Erasing Bug with New Loaders
New Nokia Connectivity Driver for USB
Added Skip Read Papub option for USB Flashing (usefull for dead phone flashing)
Added New Products to Nokia.ini
Who will buy this if you can get more in ATF?
__________________

[SpLock]

ATF 6.10 Update!! 8 SEC Flashing!! 07 DEC 10!!
ATF 6.10 Update!! 8 SEC Flashing!! 07 DEC 10!!




Common Changes:

* Application GUI is now locked to 800x600 resolution (slightly bigger than before)
* Added New Products to Nokia.ini
* Update File Path was changed (will be enabled in Server side)
* DCT4 Change Logs:
* New DCT4 Booting v2 with better compatibility with Desktop PCs and ICH7
* DCT4 Write RPL Speed was adjusted for better compatibility with very Slow UPPs
* Fixed Server Bug on DCT4 RPL Credits Counter


BB5 USB Change Logs:

* Original SX4 Card Authorization via Server is now Enabled in USB Mode
* Life Timer Tuning is now enabled in USB Mode (Supports Broadcom and Rapuyama Fields as well)
* Customized PM Programming is now Enabled in USB Mode
* Extended Self-Tests and Test-Scan is now Enabled in USB Mode
* PM Full Writing on non write protected fields are now enabled in USB Mode
* Read Memory Card Password is now added for USB Mode
* Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for USB Mode
* Manual Send Unlock Codes is now enabled in USB Mode
* Automatic Life Timer Reset to 0000:00 when Factory Reset is selected during USB Flashing
* Write New Product Code is now enabled in USB Mode
* Super Dongle Validity Check is now enabled in USB Mode


BB5 FBUS Change Logs:

* Life Timer Tuning is now Supports Broadcom and Rapuyama Fields
* Read Memory Card Password is now added for FBUS Mode
* Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for FBUS Mode
* Automatic Life Timer Reset to 0000:00 when Factory Reset is selected during FBUS Flashing


Just some more notes...

1. If MMC Password is available, it will be saved during Simlock Backup as well.
2. FBUS Loaders are still the same as the 6.00 release which is 10.42.000.7
3. USB flashing for Broadcom Phones just takes 8~9 seconds (tested on X2-00, C3-00, 2710c and 7020)
4. Life Timer Tuning AUTODETECTS the correct Fields for every BB5 Phone Released upto Today (First in the World)
5. Always add --> C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your Virus Scanner EXCLUSION LIST
6. Always add --> C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your Windows Firewall Trusted Applications List
7. This Software Release still uses LogiCore 8.15.10, so there is NO NEED to Update the Firmware if you already have this firmware version.

2710c USB Flash with LifeTimer Reset 8 Sec!!

CÓDIGO

Number of Image Files: 3
Processing Image File :
rm586__06.13.mcusw
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed    : 650000Hz
Algorithm Sending Speed    : 6500000Hz
Program Sending Speed      : 6500000Hz
Message Reading Speed      : 98000Hz
Number of Blocks :  463
Entry Point:  0x01E2
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm586__06.13.ppm_s
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed    : 650000Hz
Algorithm Sending Speed    : 6500000Hz
Program Sending Speed      : 6500000Hz
Message Reading Speed      : 98000Hz
Number of Blocks :  115
Entry Point:  0x00FA
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm586__06.13.image_s_ma_black
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed    : 650000Hz
Algorithm Sending Speed    : 6500000Hz
Program Sending Speed      : 6500000Hz
Message Reading Speed      : 98000Hz
Number of Blocks :  241
Entry Point:  0x0134
Page Format : -1
MAX PAGE : 0x0000E000
[]: Found 1 active devices.
[Nokia 2710 Navigation Edition USB Phonet]: Opening Connection
[Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
SW: V 06.13 09-04-10 RM-586 (c) Nokia
IMEI: 358294031250993
CONFIG KEY:  8000000000000002
PROVIDER KEY:  2440700000000000
Provider  :  AT&T;U.S.A. (3650)
Counters  :  0/3  ,  0/10
   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status :  Not Locked
START FULL PM BACKUP
Please Wait...
Reading : PM 0~400... OK!
FULL PM Backup Saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\358294031250993\USB_FULL_BACKUP_V 06.13 09-04-10 RM-586 (c) Nokia_358294031250993_Not Locked_124901.pm
Reading battery value  : 4119 mV

AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 6 (0x06)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000000
     ID DWORD    1 : 00000000
     ID DWORD    2 : 22000509
     ID DWORD    3 : 200C0000
  2  ROM_ID 15
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00005361
  3  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : AB079603
     ID DWORD    1 : 03FB3C85
     ID DWORD    2 : AB035491
     ID DWORD    3 : 40ACB2E7
     ID DWORD    4 : 873C89B5
  4  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  5  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  1B 0D 74 C5 32 CA 1C 61 33 94 0C 74 0E 8C 78 6E
  6  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : DE56D582
     CRC         1 : BDDE7A3A
START FLASHING
RawLoaderExtract: Processing rm586__06.13.mcusw
Match LOADER : C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_usb2nd.fg
Loader Uploaded.....
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID  : C1
SubBlocks  : 06
1 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : RAM  05
   Device Index      : 00
   Manufacturer Code : 0000 -> Flash
   Device ID         : 0000 -> not detected
   Extended/Fixed ID : 0000
   Revision ID       : 0000
2 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : MMC  04
   Device Index      : 00
   Manufacturer Code : FFFF -> Flash
   Device ID         : 0000 -> BAD FLASH TYPE
   Extended/Fixed ID : 0000
   Revision ID       : 0000
3 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : NOR  00
   Device Index      : 00
   Manufacturer Code : 0000 -> Flash
   Device ID         : 0000 -> not detected
   Extended/Fixed ID : 0000
   Revision ID       : 0000
4 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : NOR  00
   Device Index      : 01
   Manufacturer Code : 0000 -> SPANSION
   Device ID         : 0001 -> not used
   Extended/Fixed ID : 0000
   Revision ID       : 0000
5 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : MuxOneNAND  03
   Device Index      : 00
   Manufacturer Code : 00EC ->
   Device ID         : 0030 -> K5W1G13ACB
   Extended/Fixed ID : 0000
   Revision ID       : 0321
6 Sub Block ID      : 35  NAND_DRIVER_VERSION_BB5
   Block Length      : 09
   BB ASIC Index     : CMT  00
   Data              :
SearchForBootstrap_DCT5  : No Error - 0 (0x00)
Flash Descriptor
   Manufacturer Code : 00EC
   Device ID         : 0030
   Extended/Fixed ID : 0000
   Revision ID       : 0000
   Size              : 08000000 (128 MB)
   VPP Info          : 0000
   Erase10s          : 1E
   Block1s           : 32
   BErase1s          : 02
   Reserved0         : 00
   Reserved1         : 00
   Reserved2         : 00
ROOTHASH : 1B0D74C532CA1C6133940C740E8C786E
Match File.....C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_XSR16_usbalg.fg
Done!
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok
START READING RPL DATA
IMEI: 358294031250993
Reading : NPC... OK!
Reading : CCC... OK!
Reading : HWC... OK!
Reading : R&D... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\358294031250993\358294031250993_124912.rpl
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
  PAPUB_KEYS_HASH_RESP_BB5 2A
    BB Asic Index   : 00
    PAPUB Keys Hash : 84CDC75F79F52BBAE46EA3A70C9240861412C480
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.mcusw
Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT  00 only)
Certificate 1
  Name        : NPC
  ASIC Index  : CMT  0
Certificate 2
  Name        : CCC
  ASIC Index  : CMT  0
Certificate 3
  Name        : HWC
  ASIC Index  : CMT  0
Certificate 4
  Name        : RND
  ASIC Index  : CMT  0
Certificate 5
  Name        : R&D
  ASIC Index  : CMT  0
STORE_CERTIFICATE_REQUEST_BB5 : 61 05 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 4E 44 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 B6
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5...
Partition Info
    Partition Blocks :   1
     1   PARTITION_INFO_BB5
            BB ASIC Index     : 0x00 CMT
            Device Type       : 0x03 MuxOneNAND
            Device Index      : 0x00
            Partition Version : 00010000
            Spare             : FFFFFFFF
            Num Partitions    : 00000004
            Partition    1
              ID              : 00000003  COPIEDOS
              Attribute       : 00000002  RO
              Start Address   : 00020000
              Size            : 02660000
            Partition    2
              ID              : 00000008  FILESYSTEM
              Attribute       : 00000001  RW
              Start Address   : 02800000
              Size            : 04D40000
            Partition    3
              ID              : 0000000A  PMM
              Attribute       : 00000001  RW
              Start Address   : 07540000
              Size            : 00600000
            Partition    4
              ID              : 0000000B  
              Attribute       : 00000001  RW
              Start Address   : 07B40000
              Size            : 00180000
PARTITION_INFO_REQUEST_BB5 : 64012F4F00030000010000FFFFFFFF00000004000000030000000200020000026600000000000800
000010280000004D400000000000A0000000107540000006000000000000B0000000107B40000001
000005
PARTITION_INFO_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5 : No Error - 0 (0x00)
StartErase_DCT5...
BlockLength  :  0x80  (128)
ERASE Blocks :  0x03  (3)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x1B (27)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
               0             : 00000000-0001FFFF
               1             : 00020000-000203FF
               2             : 00060000-01FFFFFF
     1   FORMAT_PARTITION_BB5 0x19
            Block Length     : 0x2F (47)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
            Format Info ID   : 0x02000000
            Format Info      : 000000000000000A0000000100000002000000640000000200000002000000010000000000000000
     2   FORMAT_PARTITION_BB5 0x19
            Block Length     : 0x2F (47)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
            Format Info ID   : 0x02000000
            Format Info      : 000000000000000B0000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5003120B000300000000000001FFFF120B00030000020000000203FF120B0003000006000001FFFF
F93
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000A000000010000000200000064000000020000000200
0000100000000000000003B
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000B000000000000000200000064000000020000000200
0000100000000000000003B
Successfully erased..
Total blocks to write : 463
>>  CMT Rootkey Hash CERT : KEYS
>>  CMT Rootkey Hash CERT : ADA
>>  CMT Rootkey Hash CERT : PRIMAPP
>>  CMT Rootkey Hash CERT : RAP3NAND
>>  CMT Rootkey Hash CERT : PASUBTOC
>>  CMT Rootkey Hash CERT : PAPUBKEYS
>>  CMT Rootkey Hash CERT : UPDAPP
>>  CMT Rootkey Hash CERT : MCUSW
>>  CMT Rootkey Hash CERT : GENIO_INIT
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.ppm_s
StartErase_DCT5...
BlockLength  :  0x0E  (14)
ERASE Blocks :  0x01  (1)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x0B (11)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
               0             : 02000000-0267FFFF
ERASE_REQUEST_BB5 : 5001120B000300020000000267FFFF75
Successfully erased..
Total blocks to write : 115
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.image_s_ma_black
StartErase_DCT5...
BlockLength  :  0x3F  (63)
ERASE Blocks :  0x02  (2)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x0B (11)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
               0             : 02800000-0753FFFF
     1   FORMAT_PARTITION_BB5 0x19
            Block Length     : 0x2F (47)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
            Format Info ID   : 0x02000000
            Format Info      : 00000000000000080000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5001120B000300028000000753FFFF04
ERASE_REQUEST_BB5 : 5001192F000300000000020000000000000008000000000000000200000064000000020000000200
0000100000000000000003E
Successfully erased..
Total blocks to write : 241
ContinueFlash_DCT5 Complete
Continue Flash Complete :  : No Error - 0 (0x00)
Status_BB5 STATUS_REQUEST_BB5..
1  Sub Block ID      : 15 STATUS_NAND_OK_BB5
          Block Length      :  0F
          BB ASIC Index     :  00
          Device Type       :  03
          Device Type       :  00
          Num Bad Blocks    :  00000001
          Additional Bad    :  00000001
          Correctable ECC   :  00000000
FlashInfo.RestartMode : 2
Flashing Done...
Total Flashing Time (Erase + Flashing) : 00:00:08
(Booting time is NOT Included)
Waiting for Phone to Start-Up..(Max 100 seconds)
If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time:  5 Seconds...
Elapsed Time: 10 Seconds...
Elapsed Time: 15 Seconds...
SW: V 06.13 09-04-10 RM-586 (c) Nokia
IMEI: 358294031250993
CONFIG KEY:  8000000000000002
PROVIDER KEY:  2440700000000000
Provider  :  AT&T;U.S.A. (3650)
Counters  :  0/3  ,  0/10
   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status :  Not Locked
SIMLOCK_TEST             : PASSED
SECURITY_TEST           : PASSED
SUPER_DONGLE_TEST  : PASSED
SECURITY_CODE          : 12345
================================================
               SL3 Phone detected                
================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!          
* Simlocks are in PM 120 Only...                
* PM 308 is Write Protected...                  

FACTORY SET TO : Factory Set Full
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Production Tune
OK
FACTORY SET TO : Production Tuning
OK
FACTORY SET TO : Reset User Code
OK
FACTORY SET TO : Service Centre
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : User Data
OK
RESET LIFE TIMER TO : 0000:00
OK

X2-00 USB Flash with LifeTimer Reset 8 Sec!!

CÓDIGO

Number of Image Files: 3
Processing Image File :
rm618__04.80.mcusw
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed    : 650000Hz
Algorithm Sending Speed    : 6500000Hz
Program Sending Speed      : 6500000Hz
Message Reading Speed      : 98000Hz
Number of Blocks :  506
Entry Point:  0x01E5
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm618__04.80.ppm_a
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed    : 650000Hz
Algorithm Sending Speed    : 6500000Hz
Program Sending Speed      : 6500000Hz
Message Reading Speed      : 98000Hz
Number of Blocks :  109
Entry Point:  0x0100
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm618__04.80.image_a_0595127_004
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed    : 650000Hz
Algorithm Sending Speed    : 6500000Hz
Program Sending Speed      : 6500000Hz
Message Reading Speed      : 98000Hz
Number of Blocks :  317
Entry Point:  0x0134
Page Format : -1
MAX PAGE : 0x0000E000
[]: Found 1 active devices.
[Nokia X2-00 USB Phonet]: Opening Connection
[Nokia X2-00 USB Phonet]: Port opened OK!
SW: V 04.80 03-08-10 RM-618 (c) Nokia
IMEI: 353423040652148
CONFIG KEY:  0000000000000000
PROVIDER KEY:  2440700000000000
Provider  :  AT&T;U.S.A. (3650)
Counters  :  0/3  ,  0/10
   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status :  Not Locked
START FULL PM BACKUP
Please Wait...
Reading : PM 0~400... OK!
FULL PM Backup Saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\353423040652148\USB_FULL_BACKUP_V 04.80 03-08-10 RM-618 (c) Nokia_353423040652148_Not Locked_125647.pm
Reading battery value  : 4097 mV

AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 6 (0x06)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000000
     ID DWORD    1 : 00000000
     ID DWORD    2 : 22000509
     ID DWORD    3 : 200C0000
  2  ROM_ID 15
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00005361
  3  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : B1096A83
     ID DWORD    1 : 135F4216
     ID DWORD    2 : 1575A668
     ID DWORD    3 : 5044D453
     ID DWORD    4 : E87FCD90
  4  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  5  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  1B 0D 74 C5 32 CA 1C 61 33 94 0C 74 0E 8C 78 6E
  6  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : DE56D582
     CRC         1 : BDDE7A3A
START FLASHING
RawLoaderExtract: Processing rm618__04.80.mcusw
Match LOADER : C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_usb2nd.fg
Loader Uploaded.....
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID  : C1
SubBlocks  : 06
1 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : RAM  05
   Device Index      : 00
   Manufacturer Code : 0000 -> Flash
   Device ID         : 0000 -> not detected
   Extended/Fixed ID : 0000
   Revision ID       : 0000
2 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : MMC  04
   Device Index      : 00
   Manufacturer Code : FFFF -> Flash
   Device ID         : 0000 -> BAD FLASH TYPE
   Extended/Fixed ID : 0000
   Revision ID       : 0000
3 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : NOR  00
   Device Index      : 00
   Manufacturer Code : 0020 ->
   Device ID         : 0030 -> Type not in database
   Extended/Fixed ID : 0000
   Revision ID       : 0131
4 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : NOR  00
   Device Index      : 01
   Manufacturer Code : 0000 -> SPANSION
   Device ID         : 0001 -> not used
   Extended/Fixed ID : 0000
   Revision ID       : 0000
5 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : MuxOneNAND  03
   Device Index      : 00
   Manufacturer Code : 0020 ->
   Device ID         : 0030 -> Type not in database
   Extended/Fixed ID : 0000
   Revision ID       : 0131
6 Sub Block ID      : 35  NAND_DRIVER_VERSION_BB5
   Block Length      : 09
   BB ASIC Index     : CMT  00
   Data              :
SearchForBootstrap_DCT5  : No Error - 0 (0x00)
Flash Descriptor
   Manufacturer Code : 0020
   Device ID         : 0030
   Extended/Fixed ID : 0000
   Revision ID       : 0000
   Size              : 08000000 (128 MB)
   VPP Info          : 0000
   Erase10s          : 1E
   Block1s           : 32
   BErase1s          : 02
   Reserved0         : 00
   Reserved1         : 00
   Reserved2         : 00
ROOTHASH : 1B0D74C532CA1C6133940C740E8C786E
Match File.....C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_XSR16_usbalg.fg
Done!
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok
START READING RPL DATA
IMEI: 353423040652148
Reading : NPC... OK!
Reading : CCC... OK!
Reading : HWC... OK!
Reading : R&D... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\353423040652148\353423040652148_125658.rpl
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
  PAPUB_KEYS_HASH_RESP_BB5 2A
    BB Asic Index   : 00
    PAPUB Keys Hash : E9700989029D9E899915F781B1582048E042A738
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.mcusw
Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT  00 only)
Certificate 1
  Name        : NPC
  ASIC Index  : CMT  0
Certificate 2
  Name        : CCC
  ASIC Index  : CMT  0
Certificate 3
  Name        : HWC
  ASIC Index  : CMT  0
Certificate 4
  Name        : R&D
  ASIC Index  : CMT  0
STORE_CERTIFICATE_REQUEST_BB5 : 61 04 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 D3
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5...
Partition Info
    Partition Blocks :   1
     1   PARTITION_INFO_BB5
            BB ASIC Index     : 0x00 CMT
            Device Type       : 0x03 MuxOneNAND
            Device Index      : 0x00
            Partition Version : 00010000
            Spare             : FFFFFFFF
            Num Partitions    : 00000004
            Partition    1
              ID              : 00000003  COPIEDOS
              Attribute       : 00000002  RO
              Start Address   : 00020000
              Size            : 024E0000
            Partition    2
              ID              : 00000008  FILESYSTEM
              Attribute       : 00000001  RW
              Start Address   : 02900000
              Size            : 04C40000
            Partition    3
              ID              : 0000000A  PMM
              Attribute       : 00000001  RW
              Start Address   : 07540000
              Size            : 00600000
            Partition    4
              ID              : 0000000B  
              Attribute       : 00000001  RW
              Start Address   : 07B40000
              Size            : 00180000
PARTITION_INFO_REQUEST_BB5 : 64012F4F00030000010000FFFFFFFF00000004000000030000000200020000024E00000000000800
000010290000004C400000000000A0000000107540000006000000000000B0000000107B40000001
00001D
PARTITION_INFO_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5 : No Error - 0 (0x00)
StartErase_DCT5...
BlockLength  :  0x90  (144)
ERASE Blocks :  0x03  (3)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x2B (43)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
               0             : 00000000-0001FFFF
               1             : 00020000-000203FF
               2             : 00060000-011BFFFF
               3             : 011C0000-01CFFFFF
               4             : 02500000-028FFFFF
     1   FORMAT_PARTITION_BB5 0x19
            Block Length     : 0x2F (47)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
            Format Info ID   : 0x02000000
            Format Info      : 000000000000000A0000000100000002000000640000000200000002000000010000000000000000
     2   FORMAT_PARTITION_BB5 0x19
            Block Length     : 0x2F (47)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
            Format Info ID   : 0x02000000
            Format Info      : 000000000000000B0000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5005120B000300000000000001FFFF120B00030000020000000203FF120B00030000060000011BFF
F120B000300011C000001CFFFFF120B00030002500000028FFFFF69
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000A000000010000000200000064000000020000000200
0000100000000000000003B
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000B000000000000000200000064000000020000000200
0000100000000000000003B
Successfully erased..
Total blocks to write : 506
>>  CMT Rootkey Hash CERT : KEYS
>>  CMT Rootkey Hash CERT : PAPUBKEYS
>>  CMT Rootkey Hash CERT : PRIMAPP
>>  CMT Rootkey Hash CERT : PASUBTOC
>>  CMT Rootkey Hash CERT : ADA
>>  CMT Rootkey Hash CERT : RAP3NAND
>>  CMT Rootkey Hash CERT : ISA+DYNSW
>>  CMT Rootkey Hash CERT : MCUSW
>>  CMT Rootkey Hash CERT : MCUSW1
>>  CMT Rootkey Hash CERT : GENIO_INIT
>>  CMT Rootkey Hash CERT : UPDAPP
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.ppm_a
StartErase_DCT5...
BlockLength  :  0x0E  (14)
ERASE Blocks :  0x01  (1)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x0B (11)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
               0             : 01D00000-024FFFFF
ERASE_REQUEST_BB5 : 5001120B00030001D00000024FFFFFBE
Successfully erased..
Total blocks to write : 109
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.image_a_0595127_004
StartErase_DCT5...
BlockLength  :  0x3F  (63)
ERASE Blocks :  0x02  (2)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x0B (11)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
               0             : 02900000-0753FFFF
     1   FORMAT_PARTITION_BB5 0x19
            Block Length     : 0x2F (47)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x03 MuxOneNAND
            Device Index     : 0x00
            Format Info ID   : 0x02000000
            Format Info      : 00000000000000080000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5001120B000300029000000753FFFFF4
ERASE_REQUEST_BB5 : 5001192F000300000000020000000000000008000000000000000200000064000000020000000200
0000100000000000000003E
Successfully erased..
Total blocks to write : 317
ContinueFlash_DCT5 Complete
Continue Flash Complete :  : No Error - 0 (0x00)
Status_BB5 STATUS_REQUEST_BB5..
1  Sub Block ID      : 15 STATUS_NAND_OK_BB5
          Block Length      :  0F
          BB ASIC Index     :  00
          Device Type       :  03
          Device Type       :  00
          Num Bad Blocks    :  00000001
          Additional Bad    :  00000001
          Correctable ECC   :  00000000
FlashInfo.RestartMode : 2
Flashing Done...
Total Flashing Time (Erase + Flashing) : 00:00:08
(Booting time is NOT Included)
Waiting for Phone to Start-Up..(Max 100 seconds)
If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time:  5 Seconds...
Elapsed Time: 10 Seconds...
SW: V 04.80 03-08-10 RM-618 (c) Nokia
IMEI: 353423040652148
CONFIG KEY:  0000000000000000
PROVIDER KEY:  2440700000000000
Provider  :  AT&T;U.S.A. (3650)
Counters  :  0/3  ,  0/10
   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status :  Not Locked
SIMLOCK_TEST             : PASSED
SECURITY_TEST           : PASSED
SUPER_DONGLE_TEST  : PASSED
SECURITY_CODE          : 12345
================================================
               SL3 Phone detected                
================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!          
* Simlocks are in PM 120 Only...                
* PM 308 is Write Protected...                  

FACTORY SET TO : Factory Set Full
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Production Tune
OK
FACTORY SET TO : Production Tuning
OK
FACTORY SET TO : Reset User Code
OK
FACTORY SET TO : Service Centre
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : User Data
OK
RESET LIFE TIMER TO : 0000:00
OK

 advance_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 32.3k ) Número de descargas: 0

[ruroni925]

Link para descarga

soporte ATF

[SpLock]

Actualización 11/12/10 Nuevos archivos flash:


Por favor, descargar del "Mercury" Servidor de estos archivos Flash.


BB5

N900 RX-51 de CARE 20.2010.36.2 v15.0
N900 RX-51 de CARE 20.2010.36.2 v12

N8-00 RM-596 SEAP 011.012 v1.07

E72 RM-530 APAC 052.005 v8.01

5800 XpressMusic RM-356 EMEA 52.0.007 v15.05
5800 XpressMusic RM-356 EMEA 52.0.007 v15.04
5800 XpressMusic RM-356 EMEA 52.0.007 v15.03
5800 XpressMusic RM-356 EMEA 52.0.007 v15.02
5800 XpressMusic RM-356 EMEA 52.0.007 v15.01

C7-00 RM-675 EURO 012.004 v2.06

E72 RM-530 Europa 052.005 v9.03
E72 RM-530 Europa 052.005 v9.02
E72 RM-530 CareDP 8,0 052.005 APAC
E72 RM-530 Europa 051.018 v8.16
E72 RM-530 APAC 051.018 v7.07

X6 RM-559 21.0.004 EUROPA v5.22

C5-00 RM-645 CareDP 3,0 061.005 EUROPA
C5-00 RM-645 CareDP 3,0 061.005 SEAP
C5-00 RM-645 CareDP 3,0 061.005 CHINA

E72 RM-529 LTA 052.005 v8.01
E72 RM-529 LTA 051.018 v7.03
E72 RM-529 EURO 051.018 v7.01

C6-00 RM-624 MNOAL 20.2.042 v5.0

5530 RM-504 32.0.007 AMÉRICAS v7.01

5230 RM-588 21.0.102 EUROPA v8.02
5230 RM-588 21.0.102 EUROPA v8.01
5230 RM-588 CHINA 21.0.004 v7.03
5230 RM-588 APAC 21.0.004 v6.02
5230 RM-588 21.0.004 EUROPA v7.07
5230 RM-588 20.0.005 EUROPA v6.32

E72 RM-530 Europa 052.005 v9.01
E72 RM-530 CareDP 8,0 053.001 MEA
E72 RM-530 Europa 051.018 v8.15

C6-01 RM-718 EURO 012.006 v1.03

C6-00 RM-612 EURO 20.0.042 v5.0
C6-00 RM-612 de MEA 20.0.042 v5.0
C6-00 RM-612 SEAP 20.0.042 v5.0
C6-00 RM-612 CHINA 20.0.042 v5.0

C6-00 RM-624 SEAP 20.2.042 v5.0
C6-00 RM-624 BRASIL 20.2.042 v5.0
C6-00 RM-624 LTA 20.2.042 v5.0
C6-00 RM-624 11.2.029 LTA v3.02

N97 RM-505 EMEA 22.0.110 v8.11

C7-00 RM-675 de MEA 012.004 v2.02

N86 8MP RM-484 EUROPA 30.009 v16.07

C3-00 RM-614 CareDP 18,00 07,25 END

E5-00 RM-634 LTA 042.010 v2.03
E5-00 RM-634 LTA 042.007 v2.04

E5-00 RM-632 EURO1 042.010 v2.10
E5-00 RM-632 EURO3 042.010 v2.04
E5-00 RM-632 EURO2 042.010 v2.04, v2.05
E5-00 RM-632 EURO1 042.007 v2.11, v2.12

6700 Slide RM-576 EUROPA 033.014 v3.09

C7-00 RM-675 EURO 012.004 v2.05
C7-00 RM-675 CHINA 012.004 v2.02
C7-00 RM-675 SEAP 012.004 v2.01
C7-00 RM-675 EURO 012.003 v1.10

E71 RM-346 EURO 501.21.001 v12.08
E71 RM-346 EURO 501.21.001 v12.07

E63 RM-437 APAC 501.21.001 v12.05

X3-00 RM-540 CareDP 5,10 OperatorDP

5230 RM-594 21.2.103 LTA v5.03

5230 RM-593 TMOUS 12.2.082 v4.0

5233 RM-625 21.1.004 EUROPA v3.08
5233 RM-625 AMÉRICA 21.1.102 v2.02

[SpLock]

ATF 6.30 Christmas Update!! 24 DEC 10!! Merry Christmas!!
ATF 6.30 Christmas Update!! 24 DEC 10!! Merry Christmas!!




Common Changes:

* Added New Products to Nokia.ini

DCT4 Change Logs:

* New DCT4 Booting Procedure now compatible with any USB Hardware Chips (ICH7 etc)
* Adjusted Secondary Loader Sending Speed during Buschecking and UEM Writing
* Write RPL Timeout Delay was increased

Common Software Change Logs:

* "Regular PCB" and "Modified PCB" can now be selected before clicking "Restore Box"
* This is useful for end users who has accidentally writen the wrong firmware to their box

Flash File Server Change Logs:

* New Authentication Scheme for easier user access
* Download Activity Logging (IP Address, Box ID)


Who will buy this if you can get more in ATF?

 atf.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 84.74k ) Número de descargas: 0


Descarga:

http://rapidshare.com/#!download|634l3...aller.rar|43856

http://174.120.45.27/atfsoft/

[SpLock]

ATF 6.50 Update!! 17 Jan 11!!

ATF 6.50 Update!! 17 Jan 11!!


Common Changes:

* Official Support for ATF Lightning Boxes
* Removed Update FTDI EEPROM Button (6.50 Software will automatically Fix/Update your FTDI EEPROM if Needed);
* Automatic Activation for "Extension Port" and Infineon
* FBUS Fixed BOX_SN: 00000000 Problems when displaying the Secondary Serial Number
* Added New Products to Nokia.ini

Infineon Changes:

* Infineon XGOLD213 USB Flashing Supported (C1-01, C1-01.1 ,C1-02, C1-02.1, C2-00, C2-00.1, etc...)
* Infineon XGOLD213 Lifetimer Reset Automatic Detection Supported
* Infineon 1202/1203 (RH-111) TEST MODE Bug Fixed on ATF Lightning

BB5 Changes:

* FBUS Loaders Updated to Release 10.48.001.2
* RAP3Gv30 New Protocol Loader Supported for NOR Based BB5 Phones
* RAP3G RPL Erasing/Writing Fixed using New Loaders
* 5130c Read Info Crash after Flashing Fixed
* 3110c and 5130c New Intel Flash Chip Fully Supported using New Loaders
* SL1/SL2 Simlock Rebuild OFFLINE Method Fixed
* 2nd Time Buscheck Bug Fixed for ATF Box NEW PCB
* Symbian^3 Lifetimer Reset Fixed (C7-00, N8-00, E7-00, etc...)

Who will buy this if you can get more in ATF?

ATF [Advance Turbo Flasher] official web sites:

 atf.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 84.74k ) Número de descargas: 0


http://www.advance-box.com/

[SpLock]

ATF Standalone SD Repair, SX-4!! v6.60 Update

ATF Standalone SD Repair, SX-4!! v6.60 Update!! 08 Feb 11!!


Common Changes:

* New LogiCore 9.02.10 Firmware for ATF Chrome (Big ATF) and ATF Lightning (Small ATF)
* Updated Nokia.ini with very old and very new Phone listings
* New Nokia Connectivity Driver 7.1.36.00
* Update Important Files Button is now RE-Activcated (Updates Loaders, PM, DCC files etc...)
* Built-In Log File Viewer can now View the Current Session
* Full Package Flash File Download Server automatically selects non BUSY servers
* Fixed USER.INI files loading Bug (This also fixes Manually Loaded flash files)
* Added Manual Selection of BOX TYPE for Restore Box Function
* Updated the SKINS for the Software Interface

BB5 Changes:

* Stand-Alone Super Dongle Keys Repair for all phones with Supported HASH
* Stand-Alone SX-4 Authorization for all phones with Supported HASH
* FBUS Loaders Updated to Release 10.50.000.1
* Original Dynamic camera Configuration Files (DCC) Compatibility
* Automatically Fixes DCC Problems using Original DCC files (not PM Files)
* Erase Flash Chip can now SCAN active Flash Chips and automatically Erases Selected Flash Chips
* CMT and APE PAPUBKEYS are now Compared during Buscheck (just in case it was damaged by other Boxes)
* Flash Loader Information (Version, Revision, Protocol Type) are now Displayed during Buscheck
* Added Manual ERASE PM 1 and PM 309 file: ERASE_1_309.pm
* Added New Detection Method for 64k page Flash Chips for 5130c, 3110c etc...
* By Default, RAP3Gv30 New Loaders are not used unless ENABLED in Expert Settings Menu
* Fixed Old Protocol + Old Loaders flashing for N95, N95-8GB and other Phones with Secondary APE CPU
* Backup Certificates (RPL) for APE Subsystem is now Enabled

iTablet Changes:

* Now Supports EMMC Flashing for N900 RX-51 Variants

Infineon Changes:

* C1-01 and other Infineon USB Phones can now be flashed with PPM and CNT files only. This will save you some time if you want to skip MCU Flashing. Just make sure that the currect MCU Firmware version matches the PPM and CNT files you want to upload. Actually, you can skip CNT flashing as well if you only want to change the Language Pack.

DCT4 Changes:

* Original Dynamic camera Configuration Files (DCC) Compatibility
* Automatically Fixes DCC Problems using Original DCC files (not PM Files)

TIPS and Tricks:

Before Updating your Box Firmware to LogiCore 9.02.10, make sure you have:

1. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus Scanner Excemption/Exclusion List of Trusted Applications

2. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows Firewall Excemption/Exclusion List of Trusted Applications

3. DO NOT disable the Microsoft Windows Firewall!!!

4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and get information on how to add AdvanceBox.exe to the Excemption/Exclusion List

5. Make sure you have done Steps 1-2-3-4

For N95-8GB, N95 RM-159 and other N95 Variants, it is BEST to use "Old Loaders" for Flashing.

Using "New Loaders" for N95 flashing is 100% safe, but depending on your CABLE QUALITY,
you might get stuck at "FUR_Control_AddClient_BB5() ASIC_INDEX_APE (Ready)".
If you do get stuck, then go to Settings --> Nokia Settings --> BB5 Flash Loader Selection --> Old Loaders

[SpLock]

++++++++++ ATF Software AUTOMATIC UPDATES Launched ++++++++++
@ALL

Here are very simples steps to AUTOMATICALLY get the latest AdvanceBox.exe Software.

Take note, that this are Minor releases which fixes the Bugs on the Major
releases.

 atf_1.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 81.36k ) Número de descargas: 0

 atf_2.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 124.36k ) Número de descargas: 0

 atf_3.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 118.77k ) Número de descargas: 0

 atf_4.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 116.17k ) Número de descargas: 0

 atf_5.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 59.45k ) Número de descargas: 0


What was fixed and added inside 6.65 ???

1. Fixed DCC Writing on new Infineon Phones
2. Fixed bug of Product Selection (6610i RM-37 is detected as RM-377 etc...)
3. Fixed RAP3Gv40 Booting and Flashing (click RESTORE BOX)
4. Disabled "m_" Loaders from Being used in DCT4 Flashing
5. Infineon and iTablets menu swap is now fixed.
6. Product Search using the "?" button is now fixed
7. 2 USB Loaders Corrected:
BCM21351_PI155_usb2nd.fg
BCM21351_PI155_XSR16_usbalg.fg
8. Checks RX2 Pin Before Old Protocol Flashing Starts
9. FBUS DDR&2TX Synchronization Timeout can be adjusted in Settings
10. Remove USB Write Failed Error Messages
11. Correctly Load new format of ENO VPL files
12. Infineon USB Buscheck is now working. (Useful for forcing TEST MODE)
13. Fixed Initial Directory Bug

[SpLock]

SL3 SD Repair!! ATF Network!! ATF v7.00 Update!! 02 MAR 2011
The Long Wait is finally over...

ATF Team Launches the New ATF Network with Cutting Edge Services
that will help you become a step ahead of your competition.



[Super Dongle Repair for ALL SL3 Phones]


ATF Team is Proud to present to you SL3 Super Dongle Repair for
ALL BB5 Phones in the Market via the "Phone Authorization" Service
offered by The ATF Network (FBUS Cable Required).

This Unique service allows you to Fix Super Dongle problems on ALL
BB5 Phones and it will even allow you FULLY DOWNGRADE any BB5 Phone to any compatible Firmware Version you want.

All you need is to activate your ATF Network account and start using
ATF Credits so you can finally Repair all the NEW Phones in the Market!!!

[SX-4 Stand Alone for ALL SL3 Phones]

Through the "Phone Authorization" Service of The ATF Network, you can also enjoy stand Alone SX-4 Authorization for ALL SL3 Phones in the market.


What is Phone Authorization?


Phone Authorization is a Service Offered by The ATF Network that will
allow you to utilize more Repair Options for ALL SL3 Phones in the Market.
Once a Phone is "Authorized", Super Dongle Repairs and SX-4 Authorizationcan be performed via Stand Alone Mode.


Which Phones are supported?

All BB5 Phones are supported, but currently it only supports FBUS Connection.
USB Connection "may" be supported in the future, but we still do not have a definite date for this to happen.


Is the "Phone Authorization" Service Free?

No, it is not free. You need to purchase ATF Credits from your nearest
ATF Reseller.
You will first need to Create an ATF Network Account, then you can start using our Phone Authorization service for merely 5 Credits Per Phone. (5 credits is about 5 USD).



So ALL phones needs to be Authorized now?

No, you ONLY NEED to Authorize the New BB5 Phones which have New HASHES that are NOT Supported by any other Team in the world. If your phone is using OLD HASH, then you can still work with it without paying for Authorization.


Why do I need to pay for this service? I want free!!!

If you promise to Repair all your Customer's Phones for FREE, then we
will give you a free Activation for the ATF Network and some FREE Credits so you can Authorize Phones for free. But do not forget, you also need to repair ALL PHONES in your shop for FREE! Do you agree? Email us if you agree to repair phones for Free.



How Many times do I need to Authorize the Phone?

You only need to Authorize the phone 1 time. Once it is authorized, you
no longer need to perform authorization again.

Can you repair Simlocks and IMEI from 100% erased SL3 and SIMLOC30 phones?
No. We cannot repair or rebuild Simlocks for SL3 and SIMLOC30 phones. You can only repair these phones if you have a PM 120 Backup and an RPL Backup.


Can I SD Repair and Authorize new SIMLOC30 phones?

YES, YES, YES... The ATF Network Supports ALL BB5 Phones in the Market.
You just need to use FBUS Connection if you want to Authorize Phones.


Which NEW HASHES are currently Supported by The ATF Network?

The ATF Network currently supported ALL 22 New HASHES released
as of March 1, 2011.

479C6DDE3942E12C429C1D6ADED803710E52EBD3
C70CB07324056BC66A824347F40DB2D5E198D1B2
916F75217F32081248B15C38DFC8E81B1803F26F
25B977A055BE9B5DEC0C38A2A279C6958594B998
7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
928E5FFB88D81E5F74729A212AB9D12EC755ED14
2C05369F57CC3C4CF9E783E83D9B512B53E28D99
3AB5DB70B45D23F1ADEEBB5734160706668138E1
2B910DA4E0FBEFFFE5C65D3682854636C02881F7
68597B9162BAB81AF74C56E78EA2588F2D968376
EA81B32860B86EF4231A11831045F3E6AE071379
8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
46802B476C93A05CBAF76A64752086A9A7320E5C
1B0D74C532CA1C6133940C740E8C786E49B99671
700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
87FAC992288DA497A663E5DDC0410B11521B8D0C
55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
49A97E826B93BA20B7ED0B082475C0056EBB8F8D
FEA0F9E21EF50B836924A9F25D85C643D8514505

OLD HASHES are also supported, but you DO NOT NEED The ATF Network for OLD HASHES!!!


How much do I need to pay to Activate my ATF Network Account?
You need 99 Credits = 99 USD to Activate your ATF Network Account.
Then you will only need to spend 5 Credits (5 USD) for EACH Phone you want to Authorize.




Do I need Internet Connection to connect to the ATF Network?


Of course dear ) But the good news is, after you have successfully
Authorized your phone, you do not need the internet connection anymore
to perform SD Repairs and SX4 Authorization. It will be Stand Alone.



How long do I need to wait before my phone is Authorized?

Average time is 10 to 20 seconds, depending on your Internet Connection.


Ok last question, do you support the E7-00 which is the NEWEST BB5 Phone in the Market?

Yes, E7-00 HASH is supported by The ATF Network... However, you first need to find an FBUS Cable for E7-00 beause The ATF Network DOES NOT SUPPORT USB Connection as of the moment.

USB Connection will be supported in the future, but we cannot give you an actual date on when it will be released.

[Eliminado_Jam_*]

SL3 Local Brute Force for ALL BB5 HASHES vis FBUS Cable


*** SL1/SL2 Stand Alone Unlock and Rebuild Simlocks via Simlock RPL ***


Requirements For Service:

You need to have an ACTIVATED account in The ATF Network if your phone is NEW HASH.

Authorization Cost for EACH NEW HASH Phone is still just 5 Credits

After phone is AUTHORIZED, you can do the following tasks in Stand Alone Mode:

1. Super Dongle Repair
2. SX-4 Stand Alone Authorization
3. Decrypt SL3 PM 120 HASHES


Supported BB5 New HASHES via FBUS (Cost 5 Credits):

479C6DDE3942E12C429C1D6ADED803710E52EBD3
C70CB07324056BC66A824347F40DB2D5E198D1B2
916F75217F32081248B15C38DFC8E81B1803F26F
25B977A055BE9B5DEC0C38A2A279C6958594B998
7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
928E5FFB88D81E5F74729A212AB9D12EC755ED14
2C05369F57CC3C4CF9E783E83D9B512B53E28D99
3AB5DB70B45D23F1ADEEBB5734160706668138E1
2B910DA4E0FBEFFFE5C65D3682854636C02881F7
68597B9162BAB81AF74C56E78EA2588F2D968376
EA81B32860B86EF4231A11831045F3E6AE071379
8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
46802B476C93A05CBAF76A64752086A9A7320E5C
1B0D74C532CA1C6133940C740E8C786E49B99671
700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
87FAC992288DA497A663E5DDC0410B11521B8D0C
55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
49A97E826B93BA20B7ED0B082475C0056EBB8F8D
FEA0F9E21EF50B836924A9F25D85C643D8514505


Supported BB5 OLD HASHES via FBUS (100% FREE and DOES NOT NEED ATF NETWORK ACCOUNT)

38F312750F686F9FC9B1B3778774A195
9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
A5404AE83A594ECADEE532F0C236BFA6
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
E9EFF4BFAA5393217CA6B17755FC3E14
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0

[Eliminado_TecnoServicio_*]

PA_Simloc30 Unlock supported!! ATF v7.20 update! 10 Mar 11!!

Advance Turbo Flasher v7.20
Release Date: March 10, 2011




Freeloaders for RAPUYAMA and RAP3Gv40 Phones Released

Freeloaders are 100% Stand Alone loaders that allow you to perform
Super Dongle Repairs, SX-4 Authorization and PA_SL3 or PA_SIMLOC30
PM 120 HASH Decryption. These Loaders DO NOT need an ATF Network
Account or Credits. It is completely Stand Alone just like the other
OLD Hashes.

RAPUYAMA Phones Currently Supported:
ROOT HASH = 25B977A055BE9B5DEC0C38A2A279C695

E52-1 (RM-469)
E72-1 (RM-530)
E72-2 (RM-529)
E73 (RM-658)
6700c-1, 6700c (RM-470)
6700s (RM-576)
6710s navigator (RM-491)
6720c (RM-424)
6730c-1 (RM-547)


RAP3Gv40 Phones Currently Supported:
ROOT HASH = 7B045400E1752022F9EB80B0DEA9C65D

X3-00 (RM-540)
6303ci (RM-638)
7230 (RM-604)
3710a-1 (RM-509)

=================================================
The Phones listed above do NOT require Credits or Internet Connection.
=================================================

For NEW RAPUYAMA and NEW RAPIDO Phones, you STILL need to have an ACTIVATED
ATF NETWORK Account and 5 Credits for each New Phone you want to Authorize.



*** PA_SIMLOC30 HASHES are now Supported for PM 120 HASH Extraction ***

Tested on "REAL" PA_SIMLOC30 Phones: X3-02 RM-639 and C2-01 RM-721



----------------------------------------------------------------------------------------------------------------

Download From:
Offical Rapidshare Mirror
Offical Hotfile Mirror
Offical Mirrorcreator Mirror

----------------------------------------------------------------------------------------------------------------

ATF [Advance Turbo Flasher] official web sites:

International - http://www.advance-box.com/

----------------------------------------------------------------------------------------------------------------


Mensaje modificado por TecnoServicio el Mar 9 2011, 01:26 PM

[framar]

Por fin se puede liberar mas que un n97 mini. Fijese en la lista de los modelos soportados! Es lo que todos estuvimos esperando tanto tiempo. Ademas por un costo mas que asequible – 5$ por celular.



Modelos Nokia soportados:



6120C (RM-243) NEW 47xx - First in the world, direct unlocking for this hash with ATF Network

C6 (RM-612)

E63 (RM-437) NEW 47xx, C7xx

E66 (RM-343) NEW 47xx

E71-1 (RM-346) NEW 47xx, C7xx

5250 (RM-684)

5230-1b (RM-593)

5230-1b (RM-594)

5230 (RM-588)

5530 (RM-504)

5800d-1 (RM-356) NEW 47xx - Show Korean

6760s (RM-573) NEW 47xx - First in the world, direct unlocking for this hash with ATF Network

6790s (RM-492) NEW 47xx - First in the world, direct unlocking for this hash with ATF Network

N97-1 (RM-505) NEW 47xx,

N97-3 (RM-506) NEW 47xx,

N97-4 (RM-507) NEW 47xx,

N86 (RM-484/485/486)

N97mini (RM-555) NEW 47xx,

X6 (RM-551/559)

C3-01 (RM-640)

C5 (RM-645)

C5-03 (RM-697)

C6-01 (RM-601)

C7-00 (RM-675)

E52 (RM-469) - FREE without credits SD Repair/Decrypt PM120

E55 (RM-482) - FREE without credits SD Repair/Decrypt PM120

E5-00 (RM-632)

E72 (RM-529) - FREE without credits SD Repair/Decrypt PM120

E72 (RM-530) - FREE without credits SD Repair/Decrypt PM120

E7-00 (RM-626)

5630d (RM-431) - FREE without credits SD Repair/Decrypt PM120

6710 Navigator (RM-491) - FREE without credits SD Repair/Decrypt PM120

6700 Classic (RM-470) - FREE without credits SD Repair/Decrypt PM120

6700s (RM-576) - FREE without credits SD Repair/Decrypt PM120

6720 Classic(RM-424) - FREE without credits SD Repair/Decrypt PM120

6730 Classic (RM-547) - FREE without credits SD Repair/Decrypt PM120

6730 Classic (RM-566) - FREE without credits SD Repair/Decrypt PM120

6750 Classic (RM-381)

N8 (RM-596)

X3-02 (RM-639)

X5-01 (RM-627)

C2-01 (RM-721)

5330 (RM-479/478)

3710a-1 (RM-509) - FREE without credits SD Repair/Decrypt PM120

3710a-1b (RM-510) - FREE without credits SD Repair/Decrypt PM120

3711a-1 (RM-511) - FREE without credits SD Repair/Decrypt PM120

6303ci (RM-638) - FREE without credits SD Repair/Decrypt PM120

7230 (RM-604) - FREE without credits SD Repair/Decrypt PM120

X3-00 (RM-540) - FREE without credits SD Repair/Decrypt PM120

Para poder liberar todos estos modelos mas nuevos de Nokia tan solo hace falta:



1. ATF Box
2. Activacion ATF Network -
3. 5 creditos por celular (solo para los modelos que no estan soportados por ninguna otra Box. Los que en la lista vienen con la nota FREE – se liberan gratis).







*Nota:

- La posibilidad de liberar modelos Nokia actuales requiere disponer de una computadora actual pero se compenza con creces.

Para saber si su PC valdria para estar usada con la ATFbox para liberacion de los smodelos sl3 mas nuevos, manden a su soporte la configuracion de su PC por favor

[framar]

Cómo desbloqueo directo 47xx teléfonos HASH :

1. Ir a la ficha Red ATF
2. Autorizar teléfono - le costará 5 ATF créditos de redes
3. Ir al IMEI y Seguros
4. Haga clic para SIMlock SL1/SL2 reparación
5. El teléfono está desbloqueado; O) sin la fuerza bruta los códigos de desbloqueo

En primer lugar en el mundo sólo con ATF Red

teléfonos Probado: 6120c con 47xx y 47xx 6760s con

[Eliminado_TecnoServicio_*]

Advance Turbo Flasher v7.40
Release Date: April 04, 2011




DCT4 Updates:

-Stand Alone RPL Calculation via "REPAIR IMEI" button for ALL DCT4 Phones ASICs (2, 5, 6, 7 and 11)
-Master Code Calculator Version 2.0 can now Correctly Calculate the 10-digit Master Code for ALL DCT4 PHONES

BB5 Updates:

-Stand Alone BB5 SL3 15-digit NCK Calculator for ighashgpu Brute Force Result
-PA_SIMLOC30 NCK Code Sending now supported for New 20-digit Code
-RAPUYAMA and RAP3Gv40 Booting Fixed

Common Changes:

-Fixed Full Factory Settings Command
-Fixed Product Search and Phone Search Menu
-Self-Test Actual Status is now Displayed
Notes:

*** It is advised that you should use iMetal_Dark.skn
1. YOU MUST Add "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus Scanner Excemption/Exclusion List of Trusted Applications

2. YOU MUST Add "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows Firewall Excemption/Exclusion List of Trusted Applications

3. DO NOT disable the Microsoft Windows Firewall!!!

4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and get information on how to add AdvanceBox.exe to the Excemption/Exclusion List

5. Make sure you have done Steps 1-2-3-4



Who will buy this if you can get more in ATF?



Download From:
Offical download area
Offical Rapidshare Mirror
Offical Hotfile Mirror
Offical Mirrorcreator Mirror


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/



Mensaje modificado por TecnoServicio el Apr 4 2011, 01:30 PM

[Eliminado_TecnoServicio_*]

Free Fastest SL3 LBF with ATI 6xxx Support --> oclHashcat-lite v0.02 by atom

Gracias a un átomo por darnos libre 100% y 100% rápida SL3 Software LBF.
También 100% de apoyo para las nuevas tarjetas de ATI 6xxx (6790, 6990, etc) ...

área de descarga oficial:
oclHashcat-lite - avanzada de recuperación de contraseña


Driver GPU y SDK Requisitos:

los usuarios requieren NV v260.x ForceWare +
usuarios de AMD requieren drivers Catalyst V11.3 + con APP SDK2.4 + o integrado OpenCL
Características
Mundos más rápido MD4, MD5, SHA1 y SHA256 cracker

Libre

-Multi-GPU (hasta 16 GPU)
-Multi-OS (binarios de Linux y Windows nativo)
-Multi-plataforma (OpenCL y CUDA de apoyo)
-Multi-Algo (ver más abajo)
-La baja utilización de recursos, puede ver películas o jugar mientras grietas
-Admite máscaras contraseña
-Apoya distribuidos grietas
-Soporta una pausa / reanudar la fisuración
-Soporta sesiones
-Apoya restauración
-Apoya hexagonal de sal
-Apoya hexagonal-charset
-Térmica integrada de vigilancia
... y mucho más

Algoritmos

-MD5
-md5 ($ pass. $ sal)
-md5 (md5 ($ pass))
-vBulletin <v3.8.5
-SHA1
-sha1 ($ pass. $ sal)
-MySQL> v4.1
-MD4
-NTLM
-De dominio en caché de Verificación de Poderes
-SHA256

Probado sistema operativo de

-Todas las versiones Windows y Linux debería funcionar en 32 y 64 bits

Probado GPU

-Todos CUDA y Stream habilitado tarjetas deben trabajar
==================================================
==================================================
Para obtener más información acerca de cómo configurar Windows o Ubuntu con
oclHashcat-lite, puede visitar el foro oficial de átomo o puede también
publicar sus investigaciones en la Sección ATF en este hilo:


Más rápido LBF Descarga gratuita! OlcHashcat-lite v0.2! HD6xxx el apoyo!

Ahora puede crear usted mismo el más rápido LBF " Monstruo PC "mediante el uso de:

Placa madre: MSI Mariscal Big Bang
Tarjeta de vídeo: 8 piezas ATI 6970

Esto le dará 14.170 millones de HASH / s en relojes de stock ...
Overclock con darle más de 15 años, HASH xxx / s, y las tarjetas de vídeo
seguirá siendo inferior a 80 grados centígrados con el sistema de valores de enfriamiento.

Mensaje modificado por TecnoServicio el Apr 10 2011, 10:15 PM

[dapx]

ATF Update v7.49 - REAL ALL HASHES Support for 1 Time Activation Only!!!




For a 1 time Activation of 49 Credits, Joining The ATF Network
will allow you to perform UNLIMITED TASKS to ANY BB5 FBUS HASH
for all BB5 Phones with FBUS Connection in Planet Earth...


Update and Activate to ATF v7.49 Now and Enjoy the following supported TASKS:

Unlimited SL3 PM 120 HASH Decryption for ALL NEW HASH BB5 Phones with FBUS Connection
Unlimited SL2 Direct Unlock for 6120c, 6760s and 6790s NEW HASH 479Cxxxx Phones
Unlimited Super Dongle Repair for ALL NEW HASH BB5 Phones with FBUS Connection
Unlimited SX-4 Authorization (CUstomized Keys) for ALL BB5 Phones with FBUS Connection
Unlimited SL3 Downgrade for phones with ENO files available

Activate Now and get a chance to Participate and WIN FREE RAPIDO NEW HASH Unlocking!!!

Special SL3 LBF Tools for Hashcat v0.05 by atom on v7.49Supports Manual IMEI and HASH input or input via LOG files (*.log, *.bcl and *.sha)
Resume or Skip Brute Force Jobs at any Percentage % you want
Divide Brute Force Jobs to 2, 3, 4, 5 or 10 Super Computers (Distributed Cracking)
Specify Temperature Limit (85, 90, 95, 100 or NO LIMIT)
Improve your BF time by guessing ODD or EVEN for last digit in the Master Code!



General Updates Added on v7.49

Infineon X1-00 RM-732, X1-00.1 RM-733 Flashing Support Added
Fixed FTDI Read Timeout Bug on BB5 OLD LOADER + OLD PROTOCOL Flashing
Self Test Status Report Updated

Additional Information:

For End users who paid 99 Credits for ATF Network Activation since March 2011,
you will all get a 50 Credits Rebate which will be delivered back into your
account within 24 hours.

__________________________________________________ ________________________

Download From:
Click the auto update button in exe.


Advance Turbo Flasher v7.49 Update!! Public Discussion Thread:
ATF Update v7.49 - REAL ALL HASHES Support Discuss Thread:



ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: prohibidos_links_externos
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com



The Master Piece


Saludos. Enjoy