Frp Tablet Azupik Edicion Bob Esponja 10" A08 Con Pandora Opciones

[tona12]

Frp tablet azupik edicion bob esponja 10" A08 con pandora
tablet apagada
presionar vol mas y vol menos
en pandora seleccionar mtk y mtk
seleccionar frp y en 3 min queda sin frp

Selected model: Mediatek Mediatek
Operation: Erase FRP
Software version: 9.25

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM386 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0321
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0321
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM386 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0321
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xF34682AF, 0xDF3C6FDC, 0xA12C0AF9, 0x9C66B3DC
Get BROM version... OK
Search DA... OK [30]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Checking bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x90014A484147326505075400142609B7
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_CNAME: HAG2e?
EMMC_ID : 0x90014A484147326505075400142656B7
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03AB800000 (14.68Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_FULL_SPEED
Read partitions info from phone... OK
Checking A/B state... error
Read product info... [EXT4] ... OK
Product Brand : A08
Product Manufacturer : Azupik
Product Model : A08
Product Name : A08
Product Device : A08
Product Board : k37tv1_bsp
Board Platform : MTK6737_P
Build ID : PPR1.180610.011
Build Date : Sat Aug 2 15:25:43 CST 2025
Display ID : WT_MT6737T_DT02_20250802
Security Patch : 2024-02-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : eng.server.20250802.152636
Userdata FS Type : F2FS
Read partition frp... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT0321/FRP_BACKUP_(2026-5-28_19-0-4)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!