Redmi A3x Unisoc T603 Frp Test Point Infinity Cm2sp3 Opciones

[yurinieves]

Operation: Connect SoC T603 Boot [FF] FireFly [v2.32]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM9) 1782:4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec [0] Ok
Dev UID: 86e5f9cd928d288eba88e332c02266f1c788a20ac884ad14d08491ec733709a9
stored 6 hwid cache items

get storage info... MMC
EMMC CID: 9B010059305330363400F46050337BE5 crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 4099952691 0xF4605033
MM/YY: 7/2024
CSD: D02701320F5903FFFFFFFFFF8A404001
temp_write_protect: False
perm_write_protect: False
wp_group: 0x20 en 0x01
read extcsd... Ok
EXTCSD rev1.8 EMMC 5.1 FW: 0506
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x08
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x1000000 16.00 Mb
WP_GRP_SIZE: 0x1000000 16.00 Mb
Size: Market 64 Gb Actual 0xE90000000 58.25 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: 0% - 10% used
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_86e5f9cd928d288e_extcsd_009B-Hynix_Y0S064_5.1_2025-03-06.bin

get partitions...
Load primary GPT...
Load secondary GPT...
Primary GPT state Ok
Secondary GPT state Ok
Partitions: 78
Connected

Partitions: 78
get sw info...
AndroidInfo: vendor_boot_a;lz4;bootimage/loaded ramsidk size 0x1888B92/4189800; 15 sec
Product Brand: Redmi
Product Device: missi
Product Model: missi
Product Name: missi
Patch Level: UP1A.231005.007
SW Version: V816.0.6.0.UGSRUXM
Ver. CodeName: REL
Ver. Release: 14
Sec. Patch: 2024-08-01
Build Time: 8/30/2024 2:33:25 AM
Product Info: missi
Product Brand: UNISOC
Product Manfct: UNISOC
Board Platform: sp9863a
Product Model: klein
Product Name: miodm_klein_ru
Product Manfct: Xiaomi
Product Device: klein
Product Board: klein
Product Name: missi_ru
Android ver: 14
UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]
Device ID: redmi-unisoc-missi-missi-ru-klein
Strategy: [xiaomi]
Firmware ID: SP9863A_Xiaomi_klein_OSv14_UP1A.231005.007_missi_UNISOC_Redmi
Backup 11 items to: C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e\
Read to C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e\
Reading...
Read [1/78] prodnv 64.00 Mb Ok
Read [2/78] miscdata 1024.00 Kb Ok
Read [9/78] uboot_a 8.00 Mb Ok
Read [10/78] uboot_b 8.00 Mb Ok
Read [15/78] l_fixnv1_a 2.00 Mb Ok
Read [16/78] l_fixnv2_a 2.00 Mb Ok
Read [17/78] l_fixnv1_b 2.00 Mb Ok
Read [18/78] l_fixnv2_b 2.00 Mb Ok
Read [75/78] calinv 2.00 Mb Ok
Read [77/78] splloader 4.00 Mb Ok
Read [78/78] splloader_bak 4.00 Mb Ok
Saved 11 of 11 images. 99.00 Mb of 99.00 Mb
Done 11 files
Compress: C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e\
Cleanup...
Ok
Verify C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e.7z Finished
get slots... slot: a
Probe bootloader...
Method: default(0) known(1) a
Verify [BL] data... Socket Error # 11001
Host not found.
Bootloader state: Empty [untouched]
[MemTool] load 78 items
Finished 2 min 17 sec

Operation: Reset | Format SoC T603 Boot [FF] FireFly [v2.32]
WARNING: Reset may delete ALL USER DATA!
Continue? Yes
[-] Wipe
[-] Userdata
[+] FRP
[+] nvram
Reset Userdata is Off
If FRP still active after reset make Userdata On and repeat operation
Wait...
Partitions: 78
Backup exist: C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e\
Process FRP...
Looking for items... 1 items found
[1] Writing... Ok
Process nvram...
[19] Format... Ok
[20] Format... Ok
Completed
Finished 15 sec
Reboot... Disconnect cable if it freez
CMD 0x05 0x8E PHONE_WAIT_INPUT_TIMEOUT
Bye

Fichero(s) Adjunto(s)

 Redmi_A3... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 160.5k ) Número de descargas: 0

 

[Anunciante Autorizado]

[yurinieves]

Cuando lo hice se me fue desmarcar el borrado de la nvram, q no creo q sea necesario para este proceso

[alexanderjame]

Operation: Connect SoC T603 Boot [FF] FireFly [v2.32]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM9) 1782:4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec [0] Ok
Dev UID: 86e5f9cd928d288eba88e332c02266f1c788a20ac884ad14d08491ec733709a9
stored 6 hwid cache items

get storage info... MMC
EMMC CID: 9B010059305330363400F46050337BE5 crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 4099952691 0xF4605033
MM/YY: 7/2024
CSD: D02701320F5903FFFFFFFFFF8A404001
temp_write_protect: False
perm_write_protect: False
wp_group: 0x20 en 0x01
read extcsd... Ok
EXTCSD rev1.8 EMMC 5.1 FW: 0506
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x08
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x1000000 16.00 Mb
WP_GRP_SIZE: 0x1000000 16.00 Mb
Size: Market 64 Gb Actual 0xE90000000 58.25 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: 0% - 10% used
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_86e5f9cd928d288e_extcsd_009B-Hynix_Y0S064_5.1_2025-03-06.bin

get partitions...
Load primary GPT...
Load secondary GPT...
Primary GPT state Ok
Secondary GPT state Ok
Partitions: 78
Connected

Partitions: 78
get sw info...
AndroidInfo: vendor_boot_a;lz4;bootimage/loaded ramsidk size 0x1888B92/4189800; 15 sec
Product Brand: Redmi
Product Device: missi
Product Model: missi
Product Name: missi
Patch Level: UP1A.231005.007
SW Version: V816.0.6.0.UGSRUXM
Ver. CodeName: REL
Ver. Release: 14
Sec. Patch: 2024-08-01
Build Time: 8/30/2024 2:33:25 AM
Product Info: missi
Product Brand: UNISOC
Product Manfct: UNISOC
Board Platform: sp9863a
Product Model: klein
Product Name: miodm_klein_ru
Product Manfct: Xiaomi
Product Device: klein
Product Board: klein
Product Name: missi_ru
Android ver: 14
UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]
Device ID: redmi-unisoc-missi-missi-ru-klein
Strategy: [xiaomi]
Firmware ID: SP9863A_Xiaomi_klein_OSv14_UP1A.231005.007_missi_UNISOC_Redmi
Backup 11 items to: C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e\
Read to C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e\
Reading...
Read [1/78] prodnv 64.00 Mb Ok
Read [2/78] miscdata 1024.00 Kb Ok
Read [9/78] uboot_a 8.00 Mb Ok
Read [10/78] uboot_b 8.00 Mb Ok
Read [15/78] l_fixnv1_a 2.00 Mb Ok
Read [16/78] l_fixnv2_a 2.00 Mb Ok
Read [17/78] l_fixnv1_b 2.00 Mb Ok
Read [18/78] l_fixnv2_b 2.00 Mb Ok
Read [75/78] calinv 2.00 Mb Ok
Read [77/78] splloader 4.00 Mb Ok
Read [78/78] splloader_bak 4.00 Mb Ok
Saved 11 of 11 images. 99.00 Mb of 99.00 Mb
Done 11 files
Compress: C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e\
Cleanup...
Ok iq test free
Verify C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e.7z Finished
get slots... slot: a
Probe bootloader...
Method: default(0) known(1) a
Verify [BL] data... Socket Error # 11001
Host not found.
Bootloader state: Empty [untouched]
[MemTool] load 78 items
Finished 2 min 17 sec

Operation: Reset | Format SoC T603 Boot [FF] FireFly [v2.32]
WARNING: Reset may delete ALL USER DATA!
Continue? Yes
[-] Wipe
[-] Userdata
[+] FRP
[+] nvram
Reset Userdata is Off
If FRP still active after reset make Userdata On and repeat operation
Wait...
Partitions: 78
Backup exist: C:\InfinityBox\CM2SP3\backup\sp9863a_86e5f9cd928d288e\
Process FRP...
Looking for items... 1 items found
[1] Writing... Ok
Process nvram...
[19] Format... Ok
[20] Format... Ok
Completed
Finished 15 sec
Reboot... Disconnect cable if it freez
CMD 0x05 0x8E PHONE_WAIT_INPUT_TIMEOUT
Bye

Thank you for sharing this detailed log of the boot process for the FireFly device. As someone who is interested in embedded systems and firmware, I found this information to be quite valuable.

A few key things that stood out to me:

The device is using the SoC T603 and the SPRD3 bootloader, which provides insight into the hardware and software components involved.
The log includes a lot of low-level details like the PTFN, EMMC CID, and various configuration settings. This level of detail is really helpful for understanding the boot sequence and potential troubleshooting steps.
The information about the BOOT size, RPMB size, and other storage-related parameters gives a good overview of the device's storage configuration.