Unlock 5007a Ok Opciones

[duboy]

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5188
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM14)) (Driver version: 2.0.1136.0)
Preparing to start flash mode;
Preparing to open COM14
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 391ea51a6751f6fd21fff9471c310c9e
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
BB ID: Rjg3MEQ5MjgzMDVDRERDMUQxQ0NCOERERkQ0RTkwMUU=
HW_STORAGE_EMMC: 0x5500018F 0x53433559 0x94E01230 0x1F27D2F6 [SIZE=0x750C00000]
IMEI1 [OTP 0001]: 35xxxxxxxxxxxxx
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5007A-2C5CBS11
USRDATA INFO: 0x193000000 SIZE: 0x5B94FBE00


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
File not found;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:00

Log file saved to: LOG_8_01_2021_12_51_31.txt

[Anunciante Autorizado]

[pex]

Que botón presiona disculpa bro

Mensaje modificado por Dr. Octopus el Apr 14 2021, 08:27 AM

Motivo de edición: Que, en vez de k

[cghond]

K botón presiona disculpa bro

ninguno amigo simplemente lo conectas apagado, probado en alcatel 1v 2020 , 5007a tigo guatemala

[3idrian]

ninguno amigo simplemente lo conectas apagado, probado en alcatel 1v 2020 , 5007a tigo guatemala

Alguna otra herramienta que pueda usar para liberar el Alcatel 5007a, es que no poseo la furious gold

[geberit]

tienen idea si funciona para el 5007g?

[Dr. Octopus]

tienen idea si funciona para el 5007g?

La opcion remover sim lock esta soportado, es cuestion de que intente.

Equipo apagado, conecte usb.

Si tiene vencido para las últimas versiones de Otsmart, use version 1.0.0.5375

[JOSE CARDENAS]

CON PANDORA UNLOCK DIRECTO SELECIONANDO EL MODELO EXACTO SIN APRETAR TECLAS APAGADO DEJO LOG :

Selected model: Alcatel 5007A (1V (2020))
Operation: Unlock network
Software version: 3.4

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to BOX in BROM mode
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM18 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7318BC02, 0xF0ED3480, 0x8CA75E53, 0xDDB2C1F6
Get Chip ID... [MT6765]
Get SOC ID... [9ADEC790C61E394B2AB59EDE106048D94D1CFA081B7EBA61EF66D07FE2292623]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x8F010055593543533012E096CDDC273D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x8F010055593543533012E096CDDC273D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0750000000 (29.25Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Check A/B state... OK
Read product info... OK
Product Manufacturer : TCL
Product Board : MT6765
Board Platform : MT6765
Build ID : QP1A.190711.020
Build Date : Mon Nov 8 19:54:08 CST 2021
Display ID : QP1A.190711.020 release-keys
Security Patch : 2021-11-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : v4GAM-0
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Read OTP... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

Mensaje modificado por JOSE CARDENAS el May 26 2022, 02:21 PM