Reset Frp Tablet Onn 100011885 (aporte) Opciones

[Norb3rto00]

Hola compañeros.

En esta ocasion ha llegado a mis manos una tablet ONN 100011885 con bloqueo de frp.,
aunque tienen android 10 estas tablet´s siguen siendo de manufactura china con procesadores
mtk, por lo cual no es gran ciencia eliminar el bloqueo, el procesador de esta tablet es un
mtk 8168., pero como no esta en nuestra lista usaremos el procesador mtk 8167, despues de
escoguer el procesador damos clik en reset frp, conectamos la tablet apagada y queda en instantes.

Dejo captura del log del programa, cabe mencionar que lo hice con avengers pero es lo mismo que nck.

 jjj.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 241.91k ) Número de descargas: 0


Saludos y espero sea de ayuda para algunos !

[Anunciante Autorizado]

[david cura]

probado por tablet onn 100011886 , mismo procesador 8167

conectas apagado y en segundos
como dato no me dejo con la versión anterior de avengers, actualice y salió

Mensaje modificado por david cura el Oct 14 2021, 01:11 PM

Fichero(s) Adjunto(s)

 24239799... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 497.24k ) Número de descargas: 0

 

[zeroh]

Probado con Nck Android MTK

Exe version: NCKBox AndroidMTK 2.9.6
Selected model: 0-By CPU MT8167
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(30) : MediaTek PreLoader USB VCOM (Android) (COM30)
[30] \\?\usb#vid_0e8d&pid_2000#5&ecaee4e&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 8168 100 ca01
Using Algo 1.
Helio MT8168 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT8168
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 04010149534F43 : 000000000000000000
EMMC UA SIZE: 0x73a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x73ac00000 [28.918 GB]
Starting helio frp, not disconnect phone untill done
[HELIO][frp]Format partition, please wait...
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

[daniloreyes15]

en android 11 me da error, alguian sabe que metodo utilizar en este caso ?

[vernal]

si sale con android 11 probado con nck y seleccionando procesador mt8167

[erikjavivi]

Amigos saludos, este programa es gratis o pago?

[LAB_SANTACRUZ]

Amigos saludos, este programa es gratis o pago?

es un herramienta de paga. ( tiene un costo de adquisicion y un pago de licencia anual )

[El tio cheché]

Se puede con la nck crack, ya lo probe en by cpu en mt el mayor que tenga mt6592

[REIMAR BUCARI]

probado con hydratool sale seleccionando el procesador 8163 y conectar vol- sin brom desseleccionando todas las casillas relacionadas al brom

Mensaje modificado por Dr. Octopus el Mar 10 2022, 04:39 PM

Motivo de edición: Falto logo o imagen de operaciones del proceso...

[celcen]

Probado con Octoplus frp

Work ID: 00000000018C516B
Platform: ONN
Selected model: 100003561
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM12
Port name: MediaTek PreLoader USB VCOM (Android) (COM12)
Detecting Chip Version...
HW Chip: MT6765: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Target Config: 0000
Brom Version: FF
BootLoader Version: 03
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.27
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29856 Mb
eMMC Flash: .70010054.41323833.3220060F.C5617755
eMMC Flash: Pretec: TA2832
Internal RAM size: 256 Kb
External RAM size: 2048 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: onn
Manufacturer: onn
Model: 100003561
Device: mid8011
Android version: 10
Display ID: QP1A.190711.020 release-keys
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as onn_100003561_23-03-2022_08-58-31.dump file
FRP lock is successfully reseted!
Performed by 2.1.0.0 Software version.

[PINCELL]

probado octoplus frp v2.1.2.0

Work ID: 00000000019A745E
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL V.2148
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Port name: MediaTek PreLoader USB VCOM (Android) (COM6)
Detecting Chip Version...
HW Chip: MT8168: 8168.0000
HW Version: 8A00.CA01.0100.0000
Connecting...
Target Config: 0000
BootLoader Version: 01
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.11/28/2021.05:37_580390, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29600 Mb
eMMC Flash: .04010149.534F434F.4D30EC27.D324B7B5
eMMC Flash: Unknown: ISOCOM
Internal RAM size: 224 Kb
External RAM size: 1024 Mb
Reading partition...
Reading SUPER partition...
Reading info...
Brand: onn
Manufacturer: JOYAR
Model: 100011885
Device: 100011885
Android version: 11
Display ID: 100011885_20210325
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as onn_100011885_12-09-2022_13-17-15.dump file
FRP lock is successfully reseted!
Performed by 2.1.2.0 Software version.

[guty2012]

Nada más actualizando el procedimiento con la NCK de la onn 10.1 mt 8168 ya con la umt no pude en menos de 5 segundos.... nck al 100
Exe version: NCKBox AndroidMTK 2.9.9
Selected model: 0-By CPU MT8168
Action: Dump FullFlash.
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(29) : MediaTek PreLoader USB VCOM (Android) (COM29)
[29] \\?\usb#vid_0e8d&pid_2000#6&26daa5b7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 8168 100 ca01
Using Algo 1.
Helio MT8168 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT8168
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 04010149534F43 : 000000000000000000
EMMC UA SIZE: 0x73a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x73ac00000 [28.918 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(33) : MediaTek DA USB VCOM (Android) (COM33)
[33] \\?\usb#vid_0e8d&pid_2001#6&26daa5b7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Reading: BEGIN: 0x0 - LEN: 0x73a000000
Saved to : C:\ProgramData\Android_MTK_Backup_Folder\fullflash_dump\readed_fullflash_03_10_2022_16_52.bin
[helio]Wait untill phone will start charging.
[0]All done.
 NCK_CLAN... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 467.69k ) Número de descargas: 0


Mensaje modificado por LAB_SANTACRUZ el Oct 22 2022, 01:12 PM

Motivo de edición: Esta estrictamente escribir todo el texto en mayúsculas lea las reglas del foro, evite se expulsado.

[iCameronRB]

Nada más actualizando el procedimiento con la NCK de la onn 10.1 mt 8168 ya con la umt no pude en menos de 5 segundos.... nck al 100
Exe version: NCKBox AndroidMTK 2.9.9
Selected model: 0-By CPU MT8168
Action: Dump FullFlash.
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(29) : MediaTek PreLoader USB VCOM (Android) (COM29)
[29] \\?\usb#vid_0e8d&pid_2000#6&26daa5b7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 8168 100 ca01
Using Algo 1.
Helio MT8168 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT8168
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 04010149534F43 : 000000000000000000
EMMC UA SIZE: 0x73a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x73ac00000 [28.918 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(33) : MediaTek DA USB VCOM (Android) (COM33)
[33] \\?\usb#vid_0e8d&pid_2001#6&26daa5b7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Reading: BEGIN: 0x0 - LEN: 0x73a000000
Saved to : C:\ProgramData\Android_MTK_Backup_Folder\fullflash_dump\readed_fullflash_03_10_2022_16_52.bin
[helio]Wait untill phone will start charging.
[0]All done.
 NCK_CLAN... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 467.69k ) Número de descargas: 0

Can you please dump the firmware for this tablet? I can't find the Android 11 firmware anywhere

[maicolunlock]

Me salió perfectamente

Fichero(s) Adjunto(s)

 IMG_2024... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 5.12mb ) Número de descargas: 0
 IMG_2024... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 5.12mb ) Número de descargas: 0

 

[usuariocellshop]

Excelente aporte Amigo. Me funcionó para tablet Onn 100044018g.

Desactivar funciones brom.
Conectar apagada, presionando Vol-
Dar read firmware.
Después dar FRP.


Anexo Logs:
Action : Read Firmware.
Selected 0-By CPU:MT8167
Exe version: NCKBox AndroidMTK 3.0.3
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(12) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
[12] \\?\usb#vid_0e8d&pid_2000#5&1272f2af&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 8168 100 cb01
Using Algo 1.
Helio MT8168 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT8168
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: D6010341334135 : 000000000000000000
EMMC UA SIZE: 0x73a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x73b800000 [28.930 GB]
High speed disabled by user, continue with this settings.
Brand: onn
Device: 100044018G
Manufacturer: JOYAR
Model: 100044018G
Build ID: SP1A.210812.016
Version: 12
Build ID: SP1A.210812.016
Display ID: 100044018G_20230508
Build Date: Mon May 8 20:04:25 HKT 2023
Region: en-US
[0]IMEI not found in nvram file.
Start dumping flash, this can take up to 1 hour.......
Dumping Preloader.
Partition: proinfo
Partition: boot_para
Partition: cam_vpu1
Partition: cam_vpu2
Partition: cam_vpu3
Partition: nvram
Partition: ITEMS
Partition: protect1
Partition: protect2
Partition: persist
Partition: nvcfg
Partition: seccfg
Partition: lk
Partition: lk2
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: dtbo
Partition: expdb
Partition: frp
Partition: tee1
Partition: tee2
Partition: kb
Partition: dkb
Partition: metadata
Partition: nvdata
Partition: vbmeta
Partition: vbmeta_system
Partition: vbmeta_vendor
Partition: md_udc
Partition: super
Partition: cache
Partition: userdata
Start processing proinfo.bin ......
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram.bin ......
Reading: BEGIN: 0x3180000 - LEN: 0x500000
Start processing protect1.img ......
Reading: BEGIN: 0x3780000 - LEN: 0xa00000
Start processing protect2.img ......
Reading: BEGIN: 0x4180000 - LEN: 0xa00000
Start processing persist.img ......
Reading: BEGIN: 0x4b80000 - LEN: 0x3000000
Start processing lk
Reading boot
Reading recovery
Start processing logo ......
Start processing trustzone
Start processing nvdata.img ......
Reading: BEGIN: 0x10f40000 - LEN: 0x400000
Saved to : C:\ProgramData\Android_MTK_Backup_Folder\firmware_backup\MT8168_EMMC_onn_100044018G__2025_02_21_11_10
[helio]Wait untill phone will start charging.
[0]All done.

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: 0-By CPU MT8167
[auto]Action: Reset FRP
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(12) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
[12] \\?\usb#vid_0e8d&pid_2000#5&1272f2af&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 8168 100 cb01
Using Algo 1.
Helio MT8168 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT8168
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: D6010341334135 : 000000000000000000
EMMC UA SIZE: 0x73a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x73b800000 [28.930 GB]
High speed disabled by user, continue with this settings.
[EMMC]FORMAT
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

 Captura3... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 125.94k ) Número de descargas: 0

 Captura1... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 141.11k ) Número de descargas: 0

 Imagen_d... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 65.19k ) Número de descargas: 0

Nada más actualizando el procedimiento con la NCK de la onn 10.1 mt 8168 ya con la umt no pude en menos de 5 segundos.... nck al 100

Exe version: NCKBox AndroidMTK 2.9.9
Selected model: 0-By CPU MT8168
Action: Dump FullFlash.
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(29) : MediaTek PreLoader USB VCOM (Android) (COM29)
[29] \\?\usb#vid_0e8d&pid_2000#6&26daa5b7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 8168 100 ca01
Using Algo 1.
Helio MT8168 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT8168
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 04010149534F43 : 000000000000000000
EMMC UA SIZE: 0x73a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x73ac00000 [28.918 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(33) : MediaTek DA USB VCOM (Android) (COM33)
[33] \\?\usb#vid_0e8d&pid_2001#6&26daa5b7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Reading: BEGIN: 0x0 - LEN: 0x73a000000
Saved to : C:\ProgramData\Android_MTK_Backup_Folder\fullflash_dump\readed_fullflash_03_10_2022_16_52.bin
[helio]Wait untill phone will start charging.
[0]All done.
 NCK_CLAN... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 467.69k ) Número de descargas: 0

Mensaje modificado por usuariocellshop el Feb 21 2025, 02:32 PM