Unlock Zte Blade A3 2020 Aporte Opciones

[duboy]

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem178.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)
Preparing to sync;
Port opened [COM112];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
OK;
PHONE INFO: NONE
PHONE ID: MDA5MDQxNTMwODI1YzQ5Zg==
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 86xxxxxxxxxxxxx
SW IMEI[1]: 86xxxxxxxxxxxxx
SW IMEI[2]: 86xxxxxxxxxxxxx
SW IMEI[3]: 86xxxxxxxxxxxxx

SIMLOCK FLAG: ON

Reading NV;


NV saved to : NV_000000-00-000000-0_86xxxxxxxxxxxxx-1_98550000_23_12_2020_14_46_31.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;
Done;

Requesting data from server ! Wait please ...

Re-programming;
Security programmed;
Sync NV;
Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_23_12_2020_14_46_43.txt


Time needed - 00:02:17

[Anunciante Autorizado]

[Comunicscell]

cuantos creditos te consumio?

[demio]

cuantos creditos te consumio?

consume 1 multiprop

[cghond]

hola amigos yo tengo un zte blade a3 2020 de claro honduras:

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem138.inf,%usbcomm_dl%;SPRD U2S Diag) (Driver version: 2.0.0.131)
Preparing to sync;
Port opened [COM3];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_18A_W19.08.2_P38_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W19.08.2_P38
HW Version: sc9832e_modem
04-21-2020 06:37:52
Build number: CLA_GT_P932F50V1.0.0B05
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 862919-04-087810-8
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON


BKP saved to : BKP_000000-00-000000-0_862919-04-087810-8_00000000_4_01_2021_14_01_25.spd
SIM_LOCK TYPE: 4
ERROR: Unsupported simlock type !

Log file saved to: LOG_4_01_2021_14_01_27.txt


Time needed - 00:00:05


me arroja error alguna ayuda?

[duboy]

hola amigos yo tengo un zte blade a3 2020 de claro honduras:

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem138.inf,%usbcomm_dl%;SPRD U2S Diag) (Driver version: 2.0.0.131)
Preparing to sync;
Port opened [COM3];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_18A_W19.08.2_P38_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W19.08.2_P38
HW Version: sc9832e_modem
04-21-2020 06:37:52
Build number: CLA_GT_P932F50V1.0.0B05
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 862919-04-087810-8
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON
BKP saved to : BKP_000000-00-000000-0_862919-04-087810-8_00000000_4_01_2021_14_01_25.spd
SIM_LOCK TYPE: 4
ERROR: Unsupported simlock type !

Log file saved to: LOG_4_01_2021_14_01_27.txt
Time needed - 00:00:05
me arroja error alguna ayuda?

tienes creditos multiropositos creo que lo estas haciendo sin creditos

[MVDANIELHN]

Que aplicacion esta usando compañero?

[duboy]

Que aplicacion esta usando compañero?

lea encima que esta en dentro de los aportes de furious

[Killamz]

Para los que cuentan con NCK Dongle, aqui la solucion en la nueva version 1.5 de Spreadtrum:

 ZTE_BLAD... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 142.9k ) Número de descargas: 0




 IMG_2021... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 4.22mb ) Número de descargas: 0


Paso 1: Click en la nueva pestaña SimLock.
Paso 2: Click en el boton "Enter Diag" y conectar el celular apagado.
Paso 3: Click en "Read Sim Lock" y luego en "Remove Simlock".
¡Y listo, a cobrar!

¡Agradecer no cuesta!

Mensaje modificado por Killamz el Feb 15 2021, 10:50 AM

[theyankee]

Para los que cuentan con NCK Dongle, aqui la solucion en la nueva version 1.5 de Spreadtrum:

 ZTE_BLAD... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 142.9k ) Número de descargas: 0




 IMG_2021... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 4.22mb ) Número de descargas: 0


Paso 1: Click en la nueva pestaña SimLock.
Paso 2: Click en el boton "Enter Diag" y conectar el celular apagado.
Paso 3: Click en "Read Sim Lock" y luego en "Remove Simlock".
¡Y listo, a cobrar!

¡Agradecer no cuesta!

sale sin creditos de sta forma

[priego]

probado con modulo 1.8 salio full, 8 de junio 21

[brizarkphone]

probado y funcionando al 100 con UMT Pro modulo SPD ,....Gracias colega ... es el mismo proceso

[Esfera]

Hola a todos.

yo estoy intentado hacer uno "con Furious" y me da este error:

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem123.inf,%usbcomm_dl%;SPRD U2S Diag) (Driver version: 2.0.0.114)
Preparing to sync;
Port opened [COM13];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
ERROR: Fdl exec failed;

de que puede ser? alguna idea?

[Adderlis]

Hola a todos.

yo estoy intentado hacer uno "con Furious" y me da este error:

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem123.inf,%usbcomm_dl%;SPRD U2S Diag) (Driver version: 2.0.0.114)
Preparing to sync;
Port opened [COM13];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
ERROR: Fdl exec failed;

de que puede ser? alguna idea?

Acabo de realizar uno con la furious y salio todo bien, pero tuve que comprar creditos multipropocitos; trate mucho con NCK, pero por alguna razon no entraba en modo diag, y dame error. Este era un ZTE BLADE A3 2020; a la fecha la compra de multipropocitos me costo $18 usd. y la operacion consume un credito. $18 es igual a 10 creditos multipropocitos. // Espero que este aporte les ayude
============================================================================
Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem18.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)
Preparing to sync;
Port opened [COM58];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
OK;
PHONE INFO: NONE
PHONE ID: MDA5MTY2ZTIwZTFhMGIwZQ==
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 863748-04-924724-0
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

Reading NV;


NV saved to : NV_000000-00-000000-0_863748-04-924724-0_98550000_17_02_2022_16_26_56.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;

Furious Multipurpose Credits: 10
Done;

Requesting data from server ! Wait please ...

Re-programming;
Security programmed;
Sync NV;
Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_17_02_2022_16_28_16.txt


Time needed - 00:05:12
==========================================================

 3.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 198.91k ) Número de descargas: 0

[Marthianfred]

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem178.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)
Preparing to sync;
Port opened [COM112];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
OK;
PHONE INFO: NONE
PHONE ID: MDA5MDQxNTMwODI1YzQ5Zg==
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 86xxxxxxxxxxxxx
SW IMEI[1]: 86xxxxxxxxxxxxx
SW IMEI[2]: 86xxxxxxxxxxxxx
SW IMEI[3]: 86xxxxxxxxxxxxx

SIMLOCK FLAG: ON

Reading NV;
NV saved to : NV_000000-00-000000-0_86xxxxxxxxxxxxx-1_98550000_23_12_2020_14_46_31.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;
Done;

Requesting data from server ! Wait please ...

Re-programming;
Security programmed;
Sync NV;
Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_23_12_2020_14_46_43.txt
Time needed - 00:02:17

Mi hermano crees posible compartir el backup que te dio para el NV. ocupo uno que tiene problemas y con ese nv puedo solucionar muchas gracias de antemano

[Pablo Velasqu]

Elijes ZTE
modelo A3 2020 y listo modulo unisoc umt

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.2
SELECTED: A3 2020
ACTION: SimUnlock
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM9)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TA1W08_25_15_17
***************
Build ID: PPR1.180610.011
CPU arhitecture: armeabi-v7a
Manufacturer: ZTE
Hardware: sp9832e_1h10_go
Build product name: P932F50
Build description: sp9832e_1h10_gofu-user 9 PPR1.180610.011 407 release-keys
Product name: P932F50
ZTE product name: ZTE Blade A3 2020
SW Version: CLA_LA_P932F50V1.0.0B15
Board: sp9832e_1h10_32b
Build Id: PPR1.180610.011
Model: ZTE Blade A3 2020
Android Release: 9
Android Version: CLA_LA_Blade_A3_2020V1.0
Security patch: 2020-09-05
This phone have frp partition.
MatchesMask [l_fixnv1] [l_fixnv1] Size to download: 1024 KB
Reading l_fixnv1
IMEI 1: 863748044509131
IMEI 2: 867400020316620
IMEI 3: 867400020316638
IMEI 4: 867400020316646
Simlock Type: 4

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[4]Simlock Type: 0 0
Backup saved to: C:\Users\Pablo\Documents\spreadtrum_module\flashmode_nvram_backup\CLA_LA_Blade_A3_2020V1.0_sp9832e_1h10_32b\CLA_LA_Blade_A3_2020V1.0_sp9832e_1h10_32b_nvram_backup_1.tar
Testing key 1
Phone security supported by exe
Integrity seems ok, proceed with unlock....
Start write unlock, wait...
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\Pablo\Documents\spreadtrum_module\Saved_Logs\sp9832e_1h10_goCLA_LA_Blade_A3_2020V1.0_863748044509131_867400020316620_sim
unlock_phone_1.txt
Total Time: 00:00:48
Done.

[rockekof]

GRACIAS CRACK SALIO SIN PROBLEMAS Y SIN GASTAR CREDITOS....

Para los que cuentan con NCK Dongle, aqui la solucion en la nueva version 1.5 de Spreadtrum:

 ZTE_BLAD... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 142.9k ) Número de descargas: 0




 IMG_2021... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 4.22mb ) Número de descargas: 0


Paso 1: Click en la nueva pestaña SimLock.
Paso 2: Click en el boton "Enter Diag" y conectar el celular apagado.
Paso 3: Click en "Read Sim Lock" y luego en "Remove Simlock".
¡Y listo, a cobrar!

¡Agradecer no cuesta!