Unlock Lg Lm-x540emw (k50) Con Créditos De Octopus Opciones

[KronuZ]

Para este modelo se necesita disponer de 100 créditos en la Octopus... solo poner el teléfono en modo download y esperar que la box realice el proceso...dejo log para la compilación V10b ..Salu2

Welcome to Octoplus/Octopus Box LG Software version 3.0.7
Card S/N : xxxxxxxxxx
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: xx00000000xxxD0x
Checking data...OK
Platform: LG MTK
Selected port: COM86
Selected baudrate: 921600
Selected model: X540EMW
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM88
Mode: Emergency
Initializing flash...OK
Model ID: LM-X540EMW
Platform: mt6765
Android version: 9
SW version: LMX540EMWAT-64-V10b-EEA-XX-NOV-04-2019+0
LAF Version: 1.1
Product ID: xx4xx2xx102xx4xxx
IMEI: 35xxxx-xx-xxxxxx-x
Target operator: LAO
Hardware: rev_10
Battery level: 100%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI A: 35xxxx-xx-xxxxxx-x
IMEI B: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.

Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "X540EMW_24-12-2020_10-49-16.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: kkdg1rj
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 180 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Writing security area...
Initializing flash...OK
Writing security area...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.7 Software version.

Mensaje modificado por KronuZ el Dec 24 2020, 10:05 AM