¡¡¡ Aportaso Frp E Imei Lg M400ar Seguridad 1 De Noviembre !!!! Opciones

[daniricca]

Con esta seguridad probé de todo y no encontré nada lo único que pude hacer es arriesgar
Baje firmware de octopus modelo m400f
Le pase ese flash
Después darle a frp
E imei
Y a cobrar


Bienvenido en Octoplus/Octopus Box LG Software version 2.8.0
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG MTK
Puerto seleccionado: COM3
Velocidad seleccionada: 921600
Modelo seleccionado: M400AR
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM15
Mode: Emergency
Initializing flash...OK
Model ID: LG-M400AR
Versión de SW: LGM400ARAT-00-V10b-SCA-XXX-NOV-06-2017+0
LAF Version: 1.1
Product ID: BS06S170523001184
IMEI:
Target operator: GLOBAL
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 357584-08-005211-3
Dirección de Bluetooth: AC:0D:1B:63:6E:CC
Wi-Fi MAC address: AC:0D:1B:C2:71:F4
SPC: 000000
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Abriendo "M400F_V10a_02_CLR_COM_OP_0315.oct"...¡Error!
File declared for different phone model!
Performed by 2.8.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG MTK
Puerto seleccionado: COM3
Velocidad seleccionada: 921600
Modelo seleccionado: M400F
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM15
Mode: Emergency
Initializing flash...OK
Model ID: LG-M400AR
Versión de SW: LGM400ARAT-00-V10b-SCA-XXX-NOV-06-2017+0
LAF Version: 1.1
Product ID: BS06S170523001184
IMEI:
Target operator: GLOBAL
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 357584-08-005211-3
Dirección de Bluetooth: AC:0D:1B:63:6E:CC
Wi-Fi MAC address: AC:0D:1B:C2:71:F4
SPC: 000000
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Abriendo "M400F_V10a_02_CLR_COM_OP_0315.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Escribiendo preloader...OK
Escribiendo lk...OK
Escribiendo lk2...OK
Escribiendo laf...OK
Escribiendo boot...OK
Escribiendo recovery...OK
Escribiendo logo...OK
Escribiendo lo_bak_go...OK
Escribiendo secro...OK
Escribiendo tee1...OK
Escribiendo tee2...OK
Escribiendo rct...OK
Escribiendo factory...OK
Escribiendo efuse...OK
Escribiendo md1img...OK
Escribiendo md1dsp...OK
Escribiendo md1arm7...OK
Escribiendo md3img...OK
Escribiendo cust...OK
Escribiendo system...OK
Escribiendo lafbak...OK
Escribiendo OP_T...OK
Formating RCT...OK
Finalización...OK
Performed by 2.8.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG MTK
Puerto seleccionado: COM3
Velocidad seleccionada: 0
Modelo seleccionado: M400F
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM15
Mode: Emergency
Initializing flash...OK
Model ID: LG-M400AR
Versión de SW: LGM400ARAT-00-V10a-GLOBAL-SCA-MAR-15-2017+2
LAF Version: 1.1
Product ID: BS06S170523001184
IMEI:
Target operator: GLOBAL
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 357584-08-005211-3
Dirección de Bluetooth: AC:0D:1B:63:6E:CC
Wi-Fi MAC address: AC:0D:1B:C2:71:F4
SPC: 000000
--------------------------------------------------------------------------------
Reset FRP operation for M400F will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Resetting FRP Lock...
Escribiendo loader...OK
Escribiendo userdata...OK
Formating encrypt...OK
Restoring loader...OK
Resetting FRP lock successfully completed!
Rebooting phone...
To complete the operation, please make Factory Reset (Go to "Settings" -> "General" -> "Backup & reset" -> "Factory data reset", press "Reset phone" and "Erase everything" buttons).
Performed by 2.8.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG MTK
Puerto seleccionado: COM3
Velocidad seleccionada: 921600
Modelo seleccionado: M400F
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM15
Mode: Emergency
Initializing flash...OK
Model ID: LG-M400AR
Versión de SW: LGM400ARAT-00-V10a-GLOBAL-SCA-MAR-15-2017+2
LAF Version: 1.1
Product ID: BS06S170523001184
IMEI:
Target operator: GLOBAL
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 357584-08-005211-3
Dirección de Bluetooth: AC:0D:1B:63:6E:CC
Wi-Fi MAC address: AC:0D:1B:C2:71:F4
SPC: 000000
--------------------------------------------------------------------------------
Restablecimiento de IMEI A...
New IMEI A: 357584-08-007431-5
Lectura de la zona de seguridad...OK
Backup reservado en "M400F_357584080074315_20-03-2018_17-12-18.EEP"
Patching security...OK
Escritura de la zona de seguridad...
LAF Error: 80000121.
Trying second method...OK
Performed by 2.8.0 Software version.

Mensaje modificado por LAB_SANTACRUZ el Apr 29 2020, 11:22 PM

Motivo de edición: Esta estrictamente prohibido escribir en mayúsculas, lea las reglas del foro. evite ser sancionado.

[Anunciante Autorizado]

[ali emanuel]

colegas solo seleccionen el modelo M400f y le dan reset frp con octopus y listo esperan que prenda!

[BoolSoft]

colegas solo seleccionen el modelo M400f y le dan reset frp con octopus y listo esperan que prenda!

Así es amigo, sin vueltas. Dar "Reset FRP Lock" y seguir los pasos (Vol + 10s y conectar usb)
Probado con M400AR

[josias99]

hola
hice los pasos correctamente y se queda en chekeando seguridad y finaliza sin reiniciarse el telefono
tiene bateria 100%

saludos espero su ayuda

[superman]

le pase flash del m400f y salio frp y f4 sin problemas y wifi full

[mismaelw]

hice f4 existoso bajando versión con la rom del soporte de Octoplus...el problema es que el telefono queda inestable, marcando solo el Touch y a veces se apaga. Me dicen que se resuelve subiendo la versió a la más actualizada....pero como se debe pasar el Flash para que no pierda la reparación??..se que desmarcando algunas funciones con Lg Tool de la z3x queda full....el problema es que solo cuento con Octoplus LG.

[Edy]

hice f4 existoso bajando versión con la rom del soporte de Octoplus...el problema es que el telefono queda inestable, marcando solo el Touch y a veces se apaga. Me dicen que se resuelve subiendo la versió a la más actualizada....pero como se debe pasar el Flash para que no pierda la reparación??..se que desmarcando algunas funciones con Lg Tool de la z3x queda full....el problema es que solo cuento con Octoplus LG.

me funciono todo normal haciendo borrado de fabrica desde el menu

[nacher28]

tiene razon el compañero .. comprobado.

AQUI CON EL SOFTWARE M400AR 8 DE MARZO 2019.

19/11/2020 5:38:58 > Selected USB connection type
19/11/2020 5:38:58 > Transport: Connected
19/11/2020 5:39:00 > Authorized.
19/11/2020 5:39:02 > Work ID: 0000000000230C9D
19/11/2020 5:39:03 > Checking data...19/11/2020 5:39:04 > OK
19/11/2020 5:39:04 > Platform: LG MTK
19/11/2020 5:39:04 > Selected port: COM767
19/11/2020 5:39:04 > Selected baudrate: 921600
19/11/2020 5:39:04 > Selected model: M400F
19/11/2020 5:39:04 > Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
19/11/2020 5:39:04 > or
19/11/2020 5:39:04 > Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
19/11/2020 5:39:05 > Phone found at port COM766
19/11/2020 5:39:05 > Mode: Emergency
19/11/2020 5:39:05 > Initializing flash...19/11/2020 5:39:06 > OK
19/11/2020 5:39:07 > Model ID: LG-M400AR
19/11/2020 5:39:07 > Platform: mt6750
19/11/2020 5:39:07 > Android version: 7.0
19/11/2020 5:39:07 > SW version: LGM400ARAT-00-V10d-SCA-XXX-MAR-08-2019+0
19/11/2020 5:39:07 > LAF Version: 1.1
19/11/2020 5:39:07 > Product ID: BS01S170705002189
19/11/2020 5:39:07 > IMEI:
19/11/2020 5:39:07 > Target operator: GLOBAL
19/11/2020 5:39:07 > Hardware: rev_10
19/11/2020 5:39:07 > Battery level: 50%
19/11/2020 5:39:07 > Reading partitions...19/11/2020 5:39:07 > OK
19/11/2020 5:39:08 > Checking security...
19/11/2020 5:39:08 > offs: 00800000
19/11/2020 5:39:08 > Checking security passed!
19/11/2020 5:39:08 > --------------------------------------------------------------------------------
19/11/2020 5:39:08 > IMEI: 357XXX-XX-XXXXX-X
19/11/2020 5:39:08 > Bluetooth address: AC:0D:1B:65:A1:A1
19/11/2020 5:39:08 > Wi-Fi MAC address: AC:0D:1B:C5:10:7E
19/11/2020 5:39:08 > SPC: 000000
19/11/2020 5:39:08 > --------------------------------------------------------------------------------
19/11/2020 5:39:08 > Detecting writing method...
19/11/2020 5:39:09 > LAF Error: 80000121.
19/11/2020 5:39:09 > Trying second method...
19/11/2020 5:39:17 > Trying third method...
19/11/2020 5:39:17 > Reading ramdisk...
19/11/2020 5:39:17 > Unpacking...
19/11/2020 5:39:17 > Starting MTK decompress...
19/11/2020 5:39:17 > Decompressing 0x004FEC71
19/11/2020 5:39:17 > Decompressing 0x002A6B93
19/11/2020 5:39:17 > Set Writing params...
19/11/2020 5:39:17 > Set cmdSigData...
19/11/2020 5:39:17 > Eroor : Not found cmdSigData!19/11/2020 5:39:17 > Failed!
19/11/2020 5:39:17 > Trying third method...
19/11/2020 5:39:17 > Set Writing params AS QUALCOMM...
19/11/2020 5:39:17 > Set cmdSigData...
19/11/2020 5:39:17 > Eroor : Not found cmdSigData!19/11/2020 5:39:17 > Failed!
19/11/2020 5:39:17 > Fixing IMEI A...
19/11/2020 5:39:17 > New IMEI A: 357584-08-929371-8
19/11/2020 5:39:17 > Reading security area...19/11/2020 5:39:17 > OK
19/11/2020 5:39:17 > Backup saved to "M400F_357584089293718_19-11-2020_05-39-17.EEP"
19/11/2020 5:39:17 > Patching security...19/11/2020 5:39:17 > OK
19/11/2020 5:39:17 > Writing security area...
19/11/2020 5:39:18 > LAF Error: 80000121.
19/11/2020 5:39:18 > Trying second method...19/11/2020 5:39:26 > Failed!
19/11/2020 5:39:26 > LAF Error: 0F0F0F0F.
19/11/2020 5:39:26 > Repair IMEI operation is currently not supported for your phone's firmware.
19/11/2020 5:39:26 > Performed by 3.0.6 Software version.


AQUI EL METODO YA CON EL SOFTWARE M400F



Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
19/11/2020 14:16:33 > --------------------------------------------------------------------------------
19/11/2020 14:16:34 > Opening "M400F_V10a_02_CLR_COM_OP_0315.oct"...19/11/2020 14:16:34 > OK
19/11/2020 14:16:35 > Setting options...19/11/2020 14:16:37 > OK
19/11/2020 14:16:37 > Selecting firmware partitions...19/11/2020 14:16:40 > OK
19/11/2020 14:16:40 > Reading partitions...19/11/2020 14:16:40 > OK
19/11/2020 14:16:40 > Do you want to format User Data?
19/11/2020 14:16:42 > Formating USERDATA...19/11/2020 14:16:46 > OK
19/11/2020 14:16:46 > Formating ENCRYPT...19/11/2020 14:16:50 > OK
19/11/2020 14:16:50 > Sending signature...19/11/2020 14:16:50 > OK
19/11/2020 14:16:50 > Writing pgpt...19/11/2020 14:16:50 > OK
19/11/2020 14:16:50 > Writing lk...19/11/2020 14:16:52 > OK
19/11/2020 14:16:52 > Writing lk2...19/11/2020 14:16:52 > OK
19/11/2020 14:16:52 > Writing laf...19/11/2020 14:16:55 > OK
19/11/2020 14:16:55 > Writing boot...19/11/2020 14:16:57 > OK
19/11/2020 14:17:02 > Writing recovery...19/11/2020 14:17:04 > OK
19/11/2020 14:17:04 > Writing logo...19/11/2020 14:17:05 > OK
19/11/2020 14:17:05 > Writing lo_bak_go...19/11/2020 14:17:05 > OK
19/11/2020 14:17:05 > Writing secro...19/11/2020 14:17:05 > OK
19/11/2020 14:17:05 > Writing tee1...19/11/2020 14:17:05 > OK
19/11/2020 14:17:05 > Writing tee2...19/11/2020 14:17:06 > OK
19/11/2020 14:17:06 > Writing rct...19/11/2020 14:17:06 > OK
19/11/2020 14:17:06 > Writing factory...19/11/2020 14:17:06 > OK
19/11/2020 14:17:06 > Writing efuse...19/11/2020 14:17:06 > OK
19/11/2020 14:17:06 > Writing md1img...19/11/2020 14:17:09 > OK
19/11/2020 14:17:09 > Writing md1dsp...19/11/2020 14:17:09 > OK
19/11/2020 14:17:09 > Writing md1arm7...19/11/2020 14:17:09 > OK
19/11/2020 14:17:09 > Writing md3img...19/11/2020 14:17:09 > OK
19/11/2020 14:17:09 > Writing cust...19/11/2020 14:17:12 > OK
19/11/2020 14:17:12 > Writing system...
19/11/2020 14:20:07 > Try RCV Msg 0 : 0
19/11/2020 14:25:36 > Try RCV Msg 0 : 019/11/2020 14:25:36 > OK
19/11/2020 14:25:36 > Writing lafbak...19/11/2020 14:25:40 > OK
19/11/2020 14:25:40 > Writing OP_T...19/11/2020 14:26:40 > OK
19/11/2020 14:26:40 > Formating RCT...19/11/2020 14:26:47 > OK
19/11/2020 14:26:47 > Finalizing...19/11/2020 14:26:49 > OK
19/11/2020 14:26:49 > Performed by 3.0.6 Software version.
19/11/2020 14:26:49 > Elapsed Time: 0:10:28
19/11/2020 14:29:49 > --------------------------------------------------------------------------------
19/11/2020 14:29:49 > Selected USB connection type
19/11/2020 14:29:50 > Transport: Connected
19/11/2020 14:29:52 > Authorized.
19/11/2020 14:29:53 > Work ID: 000000000023B18A
19/11/2020 14:29:53 > Checking data...19/11/2020 14:29:54 > OK
19/11/2020 14:29:54 > Platform: LG MTK
19/11/2020 14:29:54 > Selected port: COM1
19/11/2020 14:29:54 > Selected baudrate: 921600
19/11/2020 14:29:54 > Selected model: M400F
19/11/2020 14:29:54 > Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
19/11/2020 14:29:54 > or
19/11/2020 14:29:54 > Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
19/11/2020 14:30:04 > Phone found at port COM766
19/11/2020 14:30:04 > Mode: Emergency
19/11/2020 14:30:04 > Initializing flash...19/11/2020 14:30:06 > OK
19/11/2020 14:30:07 > Model ID: LG-M400AR
19/11/2020 14:30:07 > Platform: mt6750
19/11/2020 14:30:07 > Android version: 7.0
19/11/2020 14:30:07 > SW version: LGM400ARAT-00-V10a-GLOBAL-SCA-MAR-15-2017+2
19/11/2020 14:30:07 > LAF Version: 1.1
19/11/2020 14:30:07 > Product ID: BS01S170705002189
19/11/2020 14:30:07 > IMEI:
19/11/2020 14:30:07 > Target operator: GLOBAL
19/11/2020 14:30:07 > Hardware: rev_10
19/11/2020 14:30:07 > Battery level: 50%
19/11/2020 14:30:07 > Reading partitions...19/11/2020 14:30:07 > OK
19/11/2020 14:30:08 > Checking security...
19/11/2020 14:30:08 > offs: 00800000
19/11/2020 14:30:08 > Checking security passed!
19/11/2020 14:30:08 > --------------------------------------------------------------------------------
19/11/2020 14:30:08 > IMEI: 357xxx-xx-xxxxxx-x
19/11/2020 14:30:08 > Bluetooth address: AC:0D:1B:65:A1:A1
19/11/2020 14:30:08 > Wi-Fi MAC address: AC:0D:1B:C5:10:7E
19/11/2020 14:30:08 > SPC: 000000
19/11/2020 14:30:08 > --------------------------------------------------------------------------------
19/11/2020 14:30:08 > Detecting writing method...
19/11/2020 14:30:08 > LAF Error: 80000121.
19/11/2020 14:30:08 > Trying second method...19/11/2020 14:30:08 > OK
19/11/2020 14:30:08 > Fixing IMEI A...
19/11/2020 14:30:08 > New IMEI A: 357xxxx-xx-xxxxxx-x
19/11/2020 14:30:08 > Reading security area...19/11/2020 14:30:08 > OK
19/11/2020 14:30:08 > Backup saved to "M400F_357xxxxxxxxxx_19-11-2020_14-30-08.EEP"
19/11/2020 14:30:08 > Patching security...19/11/2020 14:30:08 > OK
19/11/2020 14:30:08 > Writing security area...19/11/2020 14:30:09 > OK
19/11/2020 14:30:09 > Performed by 3.0.6 Software version.
19/11/2020 14:30:09 > Elapsed Time: 0:00:19