Reparar Imei J600g Bit7/ U7 Alguna Solucion?? |
Bienvenido, invitado ( Identificarse | Registrarse )
![]() ![]() |
Reparar Imei J600g Bit7/ U7 Alguna Solucion?? |
![]()
Publicado:
#21
|
|
Miembro del Clan ![]() Grupo: Expulsados Mensajes: 3 Agradecimientos: 1 Registrado: 22-March 20 Miembro No.: 1,166,633 Pais: ![]() ![]() |
J600g bit 7 z3x ya esta soportado?
|
|
|
Anunciante Autorizado |
![]()
Publicado:
#
|
![]() Estas ofertas pudieran interesarte. ![]() |
|
|
|
![]() ![]()
Publicado:
#22
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 55 Agradecimientos: 52 Registrado: 16-February 14 Desde: Usa Miembro No.: 571,108 Pais: ![]() ![]() |
buenas compañeros, soportado con chimera f4 y parcheo u7 octubre 19/10/20 usar este metodo y sin problemas, f4 tarda varios minutos. [attachment=329990:videotutorial.7z] 1000% Efectivo el metodo.. solo seguir al pie de la letra y obviamente contar con Chimera.. anexo imagenes finales tanto de la reparacion como del parcheo...
Fichero(s) Adjunto(s)
![]() ![]() |
|
|
A continuacion 1 usuario(s) le Agradece(n) a KLNitro por su Colaboracion: lokito92 |
![]() ![]()
Publicado:
#23
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 63 Agradecimientos: 48 Registrado: 4-April 20 Miembro No.: 1,167,682 Pais: ![]() ![]() |
Patch certificate started
Gathering phone info... Collecting information. Be patient! Do NOT disconnect the phone! Model: SM-J600G Carrier ID: PET Sales Code: PET Country Code: PERU Timezone: America/Lima Android Version: 10 [QP1A.190711.020] [SDK 29] Build Date: Thu Jul 9 07:39:48 KST 2020 PDA Version: J600GUBS7CTG1 [july 2020, rev1] Phone Version: J600GDXS7CTG1 [july 2020, rev1] CSC Version: J600GOWA7CTE1 [may 2020, rev1] Board Platform: UNIVERSAL7870 Modem Platform: SHANNON315 Serial Number: R28M11978VD Imei: 3503XXXXXXXXXXX Network Type: GSM SIM Status: LOADED Multisim Config: SS Knox Version: v30 Warranty Bit: 1 Security Patch: 2020-07-01 Preparing... Checking root access. The phone is rooted by: 3.19:EFTSU Reading data... The operation is in progress. Be patient! Do NOT disconnect the phone! Patching certificate... Checking root access. About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds. You can check the status of the imei using: *#0011# The patchcert can be removed by repeating the process. After installing new firmware, the patchcert process must be repeated. Successfully finished. Finished at local time: [10.20.20 21:03:20] WorkID: 112101298 |
|
|
A continuacion 1 usuario(s) le Agradece(n) a Kenyixd122 por su Colaboracion: lokito92 |
![]()
Publicado:
#24
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 285 Agradecimientos: 418 Registrado: 19-February 11 Desde: Florencia Miembro No.: 183,796 ![]() |
Patch certificate started Gathering phone info... Collecting information. Be patient! Do NOT disconnect the phone! Model: SM-J600G Carrier ID: PET Sales Code: PET Country Code: PERU Timezone: America/Lima Android Version: 10 [QP1A.190711.020] [SDK 29] Build Date: Thu Jul 9 07:39:48 KST 2020 PDA Version: J600GUBS7CTG1 [july 2020, rev1] Phone Version: J600GDXS7CTG1 [july 2020, rev1] CSC Version: J600GOWA7CTE1 [may 2020, rev1] Board Platform: UNIVERSAL7870 Modem Platform: SHANNON315 Serial Number: R28M11978VD Imei: 3503XXXXXXXXXXX Network Type: GSM SIM Status: LOADED Multisim Config: SS Knox Version: v30 Warranty Bit: 1 Security Patch: 2020-07-01 Preparing... Checking root access. The phone is rooted by: 3.19:EFTSU Reading data... The operation is in progress. Be patient! Do NOT disconnect the phone! Patching certificate... Checking root access. About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds. You can check the status of the imei using: *#0011# The patchcert can be removed by repeating the process. After installing new firmware, the patchcert process must be repeated. Successfully finished. Finished at local time: [10.20.20 21:03:20] WorkID: 112101298 Como logro desactivar el RMM no me deja rootear por este motivo -------------------- MARIA SOFIA RODRIGUEZ OBANDO MI REINA
|
|
|
![]()
Publicado:
#25
|
|
![]() Miembro del Clan ![]() Grupo: Miembros Mensajes: 26 Agradecimientos: 7 Registrado: 6-January 09 Desde: argentina Miembro No.: 16,749 ![]() |
Como logro desactivar el RMM no me deja rootear por este motivo Estoy en la misma, me deja activar oem pero me da prenormal en modo download,ya intente con otra firmware pero nada -------------------- [font="Times New Roman"][/font]
TECHNO Division Moviles [size="4"][/size]USTPRO2 JAF + PKEY CYCLONE POLARBOX SETOOLBOX NSPRO MSSBOX VIGYSBOX |
|
|
![]()
Publicado:
#26
|
|
![]() Miembro del Clan ![]() Grupo: Miembros Mensajes: 100 Agradecimientos: 102 Registrado: 6-July 13 Desde: Argentina Miembro No.: 489,385 Pais: ![]() ![]() |
|
|
|
![]()
Publicado:
#27
|
|
![]() Sensei Supremo del Clan ![]() ![]() ![]() ![]() ![]() Grupo: Miembros Mensajes: 2,593 Agradecimientos: 2548 Registrado: 14-May 11 Miembro No.: 210,434 Pais: ![]() ![]() |
|
|
|
![]()
Publicado:
#28
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 10 Agradecimientos: 11 Registrado: 11-September 17 Desde: GB Miembro No.: 986,229 Pais: ![]() ![]() |
hola amigos soy nuevo en esto, una pregunta ya se puede hacer f4 a un j6 bit7 con z3x?
|
|
|
![]()
Publicado:
#29
|
|
Colaborador del Clan ![]() ![]() Grupo: Miembros Mensajes: 656 Agradecimientos: 477 Registrado: 7-August 10 Desde: guatemala Miembro No.: 123,390 ![]() |
amigos alguna solucion para unlock bit8
algun modem |
|
|
![]()
Publicado:
#30
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 23 Agradecimientos: 47 Registrado: 19-July 16 Miembro No.: 851,997 Pais: ![]() ![]() |
me uno ala peticion de bit 8, dise que setiene que usar un moden mas vajo con z3x. algung engfirmware o de donde consigo eso
|
|
|
![]()
Publicado:
#31
|
|
![]() Sensei Supremo del Clan ![]() ![]() ![]() ![]() ![]() Grupo: Miembros Mensajes: 2,593 Agradecimientos: 2548 Registrado: 14-May 11 Miembro No.: 210,434 Pais: ![]() ![]() |
|
|
|
![]() ![]() |
Ver Visitas | Fecha y Hora actual: 25th August 2025 - 12:33 AM |