Frp Lanix Ilium M9, Nck Opciones

[Emmett]

Frp con la NCK, solo hay que agregar el DA que dejare + select el Processor: MT6739
tambien es posible leer el Firmware con la misma NCK.

Action : Boot Info.
Selected 0-By CPU:MT6739
Exe version: NCKBox AndroidMTK 2.7
Will be used loader: DA_SWSEC_1804_K600AG_8.1_LAX_MX_TEL_11_93.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM11)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 0 ca00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 90014A48414734 : 000000000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM12)
Build ID: O11019
Display ID: O11019 release-keys
Version: 8.1.0
Build Date: Thu Jul 4 12:39:04 CST 2019
Brand: TINNO
Model: Ilium M9
Brand: LANIX
Device: Ilium_M9
Manufacturer: LANIX
This phone have FRP partition.
Modem version: MOLY.LR12A.R2.MP.V18.P11
[helio]Wait untill phone will start charging.
[0]All done.

Fichero(s) Adjunto(s)

 DA_SWSEC... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 149.2k ) Número de descargas: 41