Problema Con G930a Bit 10 Opciones

[cinderback]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes via Server
Selected model: SM-G930A
Selected port: COM51 SAMSUNG Mobile USB Serial Port
Software version: 37.0

Checking Login and Password... OK
Ballance: 58 crd.
You have 58 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 8.0.0
PDA version: G930AUCUACSF1
CSC version: G930AATTACSF1
Phone version: G930AUCUACSF1
Product code: SM-G930AZDAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38H30N4EJX
IMEI: 355577658
HW version: REV0.6
RF cal date: 2016.03.21
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM25 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 83902957
NET lock: 81827141
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.37.0


Como pueden ver en el log, la z3x arroja los códigos más sin embargo el equipo marca los códigos como incorrectos!

Alguna manera de solucionar? O hay que esperar por que es binario 10 :/

Fichero(s) Adjunto(s)

 IMG_2019... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 43.39k ) Número de descargas: 0

 

[Anunciante Autorizado]

[rango123]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes via Server
Selected model: SM-G930A
Selected port: COM51 SAMSUNG Mobile USB Serial Port
Software version: 37.0

Checking Login and Password... OK
Ballance: 58 crd.
You have 58 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 8.0.0
PDA version: G930AUCUACSF1
CSC version: G930AATTACSF1
Phone version: G930AUCUACSF1
Product code: SM-G930AZDAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38H30N4EJX
IMEI: 355577658
HW version: REV0.6
RF cal date: 2016.03.21
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM25 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 83902957
NET lock: 81827141
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.37.0
Como pueden ver en el log, la z3x arroja los códigos más sin embargo el equipo marca los códigos como incorrectos!

Alguna manera de solucionar? O hay que esperar por que es binario 10 :/

Hola que tal amigo intenta poner primero el código freeze y despues el otro código quesería net lock asi me apasado con algunos modelos y funciono bien despues

[jmaciel]

Hola que tal amigo intenta poner primero el código freeze y despues el otro código quesería net lock asi me apasado con algunos modelos y funciono bien despues

los dos codigos como uno mismo ?????

[Xidootech]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes via Server
Selected model: SM-G930A
Selected port: COM51 SAMSUNG Mobile USB Serial Port
Software version: 37.0

Checking Login and Password... OK
Ballance: 58 crd.
You have 58 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 8.0.0
PDA version: G930AUCUACSF1
CSC version: G930AATTACSF1
Phone version: G930AUCUACSF1
Product code: SM-G930AZDAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38H30N4EJX
IMEI: 355577658
HW version: REV0.6
RF cal date: 2016.03.21
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM25 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 83902957
NET lock: 81827141
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.37.0
Como pueden ver en el log, la z3x arroja los códigos más sin embargo el equipo marca los códigos como incorrectos!

Alguna manera de solucionar? O hay que esperar por que es binario 10 :/

Tengo el mismo problema, realice la lectura de códigos con z3x y me marco error al ingresarlo, primero FREEZE LOCK y después NET LOCK, para no quedarme con la duda lo hice ahora con octopus y me dio los mismos códigos. El equipo era bit 11, lo degrade a bit 10 y aun así nada.
Como el equipo es de un conocido semanas después decidí intentarlo nuevamente pero ahora con Chimera y me arrojo los mismos códigos y nada, mande la info a los respectivos soportes, aun estoy a la espera de alguna novedad

[digiworks]

Tengo el mismo problema, realice la lectura de códigos con z3x y me marco error al ingresarlo, primero FREEZE LOCK y después NET LOCK, para no quedarme con la duda lo hice ahora con octopus y me dio los mismos códigos. El equipo era bit 11, lo degrade a bit 10 y aun así nada.
Como el equipo es de un conocido semanas después decidí intentarlo nuevamente pero ahora con Chimera y me arrojo los mismos códigos y nada, mande la info a los respectivos soportes, aun estoy a la espera de alguna novedad

no han probado flasheando el combination correspondiente?
prueben asi
luego full flash
y prueban si falla el insertar codigo en el combination

nos comparten sus experiencias