Cuenta Google Samsung J727t - J727t1 8.1.0 Bit 5 U5 Frp Opciones

[joseramos19]

1.-flashear combination COMBINATION_TMB_

2.-flashear el ap del firmware AP_J727T1UVS5BSC2_CL14133265_QB22566678_REV01_user_low_ship_meta.tar marcando solo boot.img, recovery.img y system.img

3.-esperar a que encienda y activan OEM, en caso de no tener habilitado OEM apagarlo y ponerlo en modo download y tendrá frp off

4.-después flashear firmware completo del mismo binario

Operation: Flash
Selected model: SM-J727T1
Software version: 36.2

File analysis... OK
Total file size: 0x3DDBEBC8 (989 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending param.bin... OK
Sending cm.bin... OK
Sending nad_fw.bin... OK
Sending nad_refer.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Flashing done (time - 00:01:04)

Operation: Flash
Selected model: SM-J727T1
Software version: 36.2

File analysis... OK
Total file size: 0x87D44370 (2173 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.lz4... OK
Flashing done (time - 00:02:13)

Operation: Flash
Selected model: SM-J727T1
Software version: 36.2

File analysis... OK
Total file size: 0xCF24B7F0 (3314 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.lz4... OK
Sending userdata.img.lz4... OK
Sending modem.bin.lz4... OK
Sending cache.img.lz4... OK
Flashing done (time - 00:03:21)​

Fichero(s) Adjunto(s)

 J727t___... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 63bytes ) Número de descargas: 26

 

[Anunciante Autorizado]

[sanmartin]

1.-flashear combination COMBINATION_TMB_

2.-flashear el ap del firmware AP_J727T1UVS5BSC2_CL14133265_QB22566678_REV01_user_low_ship_meta.tar marcando solo boot.img, recovery.img y system.img

3.-esperar a que encienda y activan OEM, en caso de no tener habilitado OEM apagarlo y ponerlo en modo download y tendrá frp off

4.-después flashear firmware completo del mismo binario

Operation: Flash
Selected model: SM-J727T1
Software version: 36.2

File analysis... OK
Total file size: 0x3DDBEBC8 (989 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending param.bin... OK
Sending cm.bin... OK
Sending nad_fw.bin... OK
Sending nad_refer.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Flashing done (time - 00:01:04)

Operation: Flash
Selected model: SM-J727T1
Software version: 36.2

File analysis... OK
Total file size: 0x87D44370 (2173 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.lz4... OK
Flashing done (time - 00:02:13)

Operation: Flash
Selected model: SM-J727T1
Software version: 36.2

File analysis... OK
Total file size: 0xCF24B7F0 (3314 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.lz4... OK
Sending userdata.img.lz4... OK
Sending modem.bin.lz4... OK
Sending cache.img.lz4... OK
Flashing done (time - 00:03:21)​

Esta caido el link lo puedes volver a subir..