Frp Tablet Lenovo Tb-7703x Opciones

[necrospatter]

Hola.... con UMT - QcFire

1. Conectan el cable al computador presionando al tiempo vol + y vol - para generan el puerto Qualcomm HS-USB QDLoader 9008.
2. Eligen la pestaña Read & Tools.
3. En Common Fuctions seleccionamos Reset FRP y esperamos a que haga el proceso.
4. Le damo en la tablet Reboot System Now.

Y listo....

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM54)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 03001700
OPK_DATA : 31AED0F007C9473D66B9B986E6926D1C4C9206B399FCFA2500E48721442E99A4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_018]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LENOVO Lenovo TB-7703X [msm8916]
Software : TB-7703X_S000137_160830_ROW, TB-7703X_S000137_160830_ROW [Tue Aug 30 10:15:58 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-09-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.5

[Anunciante Autorizado]

[SUESCUN]

100% testeado!!!

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM70)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 03001700
OPK_DATA : 31AED0F007C9473D66B9B986E6926D1C4C9206B399FCFA2500E48721442E99A4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_018]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LENOVO Lenovo TB-7703X [msm8916] [TB-7703X]
Software : TB-7703X_S000137_160830_ROW, TB-7703X_S000137_160830_ROW [Tue Aug 30 10:15:58 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-09-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.5