Alcatel 3v (5099) Unlock Opciones

[jonathantorre]

Buenas, necesito desbloquear éste equipo y no encuentro la manera de hacerlo.
Quien con alguna solución?

[Anunciante Autorizado]

[francisco26]

con foriusgold se puede desbloquear, con ot smart te dejo la informacion del soporte

OT-5099A [UNLOCK: YES] [MEM_WRITE: YES] [COUNTER_RESET: YES] [CH. PROV.ID: YES] [MEM_READ: YES] [PATTERN_LOCK_READ: YES] [READ_WRITE_PART: YES] [FRP_RESET: YES]
OT-5099D [UNLOCK: YES] [MEM_WRITE: YES] [COUNTER_RESET: YES] [CH. PROV.ID: YES] [MEM_READ: YES] [PATTERN_LOCK_READ: YES] [READ_WRITE_PART: YES] [FRP_RESET: YES]
OT-5099L [UNLOCK: YES] [MEM_WRITE: YES] [COUNTER_RESET: YES] [CH. PROV.ID: YES] [MEM_READ: YES] [PATTERN_LOCK_READ: YES] [READ_WRITE_PART: YES] [FRP_RESET: YES]
OT-5099U [UNLOCK: YES] [MEM_WRITE: YES] [COUNTER_RESET: YES] [CH. PROV.ID: YES] [MEM_READ: YES] [PATTERN_LOCK_READ: YES] [READ_WRITE_PART: YES] [FRP_RESET: YES]
OT-5099Y [UNLOCK: YES] [MEM_WRITE: YES] [COUNTER_RESET: YES] [CH. PROV.ID: YES] [MEM_READ: YES] [PATTERN_LOCK_READ: YES] [READ_WRITE_PART: YES] [FRP_RESET: YES]

[chipscell]

desbloqueo alcatel 5099A hecho


Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM14))
Preparing to start flash mode;
Preparing to open COM14
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 4d442fca5a0ac3e5be6b38ba60ced4e1
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem64.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM37;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0xBF550342 0x9B94D2CC [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 015106-00-xxxxxx-6
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5099A-2CRGDO1
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000



Searching data;


Locked to [SIM1]: 370-01
code_cat_n: 6859090492646195 enabled: yes tries: 10
code_cat_ns: 6859090492646195 enabled: no tries: 0
code_cat_sp: 6859090492646195 enabled: no tries: 0
code_cat_c: 6859090492646195 enabled: no tries: 0
code_cat_sim: 6859090492646195 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:06

Log file saved to: LOG_17_05_2018_18_38_34.txt

[elmasterttt]

100% efectivo

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM51))
Preparing to start flash mode;
Preparing to open COM51
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: f9477ebb07d5b3d93c7516aab5082912
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem27.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM93;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x772A0342 0xEBB4CA07 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 0151-------------
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5099A-2BRGDO1
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000



Searching data;


Locked to [SIM1]: 370-01
code_cat_n: 9736340064615880 enabled: yes tries: 10
code_cat_ns: 9736340064615880 enabled: no tries: 0
code_cat_sp: 9736340064615880 enabled: no tries: 0
code_cat_c: 9736340064615880 enabled: no tries: 0
code_cat_sim: 9736340064615880 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:10

Log file saved to: LOG_25_05_2018_09_27_51.txt

[albertojrb93]

Ami me da el siguiente error. alguien sabe por que?

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM44))
Preparing to start flash mode;
Preparing to open COM44
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: c6f8cd41620ae2ed09f494071aa6cc26
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem8.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM1;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x625E0342 0x119465D8 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xEE000000 SIZE: 0x60000000


ERROR: GET_PART_INFO;

Time needed - 00:00:00

[gamita]

Buenas, necesito desbloquear éste equipo y no encuentro la manera de hacerlo.
Quien con alguna solución?

ya tiene el soporte la sigma box, solo actualicen el software de la box y a desbloquear

[jonascoffe13]

ya tiene el soporte la sigma box, solo actualicen el software de la box y a desbloquear

Agregadas funciones desbloqueo / eliminación de FRP para Moto E5 Play XT1921-5 (Sprint)
Agregadas funciones desbloqueo / reparación de IMEI / eliminación de FRP para Alcatel 5099o <----- El 5099A no se podra.
Agregada función eliminación de FRP para Moto G6 Plus XT1926

[pirro2014]

ya tiene el soporte la sigma box, solo actualicen el software de la box y a desbloquear

hermano puedes indicar como es el procedimiento para desbloquear dicho telf..

[mosito44]

ya tiene el soporte la sigma box, solo actualicen el software de la box y a desbloquear

Colega hasta la fecha Sigma no tiene soporte para este modelo (5099a) 3v

[elmaestro05]

alguien con este firmware para flashear el equipo

[joedl]

100% efectivo

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM51))
Preparing to start flash mode;
Preparing to open COM51
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: f9477ebb07d5b3d93c7516aab5082912
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem27.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM93;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x772A0342 0xEBB4CA07 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 0151-------------
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5099A-2BRGDO1
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000
Searching data;
Locked to [SIM1]: 370-01
code_cat_n: 9736340064615880 enabled: yes tries: 10
code_cat_ns: 9736340064615880 enabled: no tries: 0
code_cat_sp: 9736340064615880 enabled: no tries: 0
code_cat_c: 9736340064615880 enabled: no tries: 0
code_cat_sim: 9736340064615880 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:10

Log file saved to: LOG_25_05_2018_09_27_51.txt

cabe mencionar que esto se hace con el pack 6 de furious, en menos de 1 minuto esta liberado

[mauro1988]

solo para confirmar unas imagenes amigos

Fichero(s) Adjunto(s)

 unlock.j... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 283k ) Número de descargas: 0

 

[Pablo Velasqu]

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM33))
Preparing to start flash mode;
Preparing to open COM33
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 8066779d4b89273f58c1c2e44f0b0f8c
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem299.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM148;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0xE3AD0342 0xD945DED0 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 015106-00-030335-2
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5099A-2BAVDO1
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000



Searching data;


Locked to [SIM1]: 370-02
code_cat_n: 6740436622753295 enabled: yes tries: 4
code_cat_ns: 6740436622753295 enabled: no tries: 0
code_cat_sp: 6740436622753295 enabled: no tries: 0
code_cat_c: 6740436622753295 enabled: no tries: 0
code_cat_sim: 6740436622753295 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:03

Log file saved to: LOG_29_12_2018_01_15_42.txt

[punker2015]

No se, pero algunos alcatel de esos nuevos que salen con Furious, aca en Honduras con el chip de tigo dan un error que la señal es intermitente, no se si a alguien mas le pasa ?

[100%Succefull]

Colega hasta la fecha Sigma no tiene soporte para este modelo (5099a) 3v

Hoy saco Sigma una actualización que ya hace ese modelo entre otros.

[zona digital]

Hoy saco Sigma una actualización que ya hace ese modelo entre otros.

saludos colega, sabes como conectarlo ¿

lo conecto con vol - menos y habilita puerto momentaneamente y desaparece

Mensaje modificado por zona digital el Feb 16 2019, 01:41 PM

[zona digital]

Hoy saco Sigma una actualización que ya hace ese modelo entre otros.

saludos, sabes como conectarlo ? en la pestaña de mtk me sale el puerto por 3 segundos y desaparece luego no se habilita mas , lo conecto con volumen - pero no eh podido hacer unlock

[elmasterttt]

hice otro pero este tenia la version 8.0.0 y para que furiox lo haga tuve k conectarlo con volumen + apagado y salio de una

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM26))
Preparing to start flash mode;
Preparing to open COM26
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 3fde75d6a6bf4c042934973b5ef5e61f
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem5.inf,%mtk_sp_da%;DA USB VCOM Port)
TRYING TO OPEN COM22;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x145A0342 0x319419D8 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 015106-00-010576-5
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5099A-2BRGDO1
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000



Searching data;


Locked to [SIM1]: 370-01
code_cat_n: 3317933216907241 enabled: yes tries: 10
code_cat_ns: 3317933216907241 enabled: no tries: 0
code_cat_sp: 3317933216907241 enabled: no tries: 0
code_cat_c: 3317933216907241 enabled: no tries: 0
code_cat_sim: 3317933216907241 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:04

Log file saved to: LOG_23_02_2019_17_40_44.txt

[m0bin3t]

No se, pero algunos alcatel de esos nuevos que salen con Furious, aca en Honduras con el chip de tigo dan un error que la señal es intermitente, no se si a alguien mas le pasa ?

claro ami me pasa aun no allo cual es el problema alguna solucion

[jufiga]

buenas ya la nck box lo hace el alcatel 5099a

Exe version: NCKBox AndroidMTK 1.8.9.9
Selected model: Alcatel OT-5099A
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM173)
Boot mode: Brom
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM224)
Phone have OTP partition.
MODEL FROM PROINFO: 5099A-2CRGDO1
SECRO FROM PROINFO: X6J0NJ01CK20
OTP IMEI: 015106000583250
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:10)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[4700]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
Wait untill phone will start charging.
[0]All done.

Mensaje modificado por jufiga el Mar 29 2019, 05:03 PM