Procesos Realizados Nueva Actualizacion Equipos Cpid Opciones

[super raton]

Hola amigos postear procesos 100% repair con la nueva actualizacion equipos CPID

G950F Imei Repair & Patch Cert

Chimera Mobile Phone Utility version: 20.22.1434

Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G950F
Sales Code: XID
Country Code: INDONESIA
Timezone: Africa/Dar_es_Salaam
Android Version: 8.0.0 [R16NW] [SDK 26]
Build Date: Wed Dec 26 11:34:58 KST 2018
PDA Version: G950FXXS4CRLB [december 2018, revB]
Phone Version: G950FXXU4CRKB [november 2018, revB]
CSC Version: G950FOLE4CRL1 [december 2018, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON355
Serial Number: RF8JA3VVV2M
Imei: 355089.........
Battery Status: 4.01V (79%)
Network Type: GSM
SIM Status: READY,READY
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2019-01-01
Data Encryption State: encrypted
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
Checking boot image. Be patient! Do NOT disconnect the phone!
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
Communicating with the server. Be patient! Do NOT disconnect the phone!
After the process, the phone can restart once during startup.
Within 20-70 seconds after the phone starts, the signal strength indicator will toggle: signal -> no signal -> signal.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [02.14.19 01:41:16]
WorkID: 52535126

[Anunciante Autorizado]

[lasito]

Yo creo amigos que los companeros tecnicos verdaderos no deberian dar los procesos a simple vista que investiguen que prueben sus propios telefonos, por que luego ustedes veran que en los locales ya comesaran a cobrar 5 dolores por ixxx si ponen soluciones hagalon en secion vip para que les cuesten para que invierten algo por lo menos ,estos llamados tecnicos de yotube.

[cepi]

G950F Imei Repair & Patch Cert

Chimera Mobile Phone Utility version: 20.22.1434

Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G950F
Sales Code: XID
Country Code: INDONESIA
Timezone: Africa/Dar_es_Salaam
Android Version: 8.0.0 [R16NW] [SDK 26]
Build Date: Wed Dec 26 11:34:58 KST 2018
PDA Version: G950FXXS4CRLB [december 2018, revB]
Phone Version: G950FXXU4CRKB [november 2018, revB]
CSC Version: G950FOLE4CRL1 [december 2018, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON355
Serial Number: RF8JA3VVV2M
Imei: 355089.........
Battery Status: 4.01V (79%)
Network Type: GSM
SIM Status: READY,READY
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2019-01-01
Data Encryption State: encrypted
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
Checking boot image. Be patient! Do NOT disconnect the phone!
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
Communicating with the server. Be patient! Do NOT disconnect the phone!
After the process, the phone can restart once during startup.
Within 20-70 seconds after the phone starts, the signal strength indicator will toggle: signal -> no signal -> signal.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [02.14.19 01:41:16]
WorkID: 52535126

Te salio el root automatico?, no tengo forma de root esos modelos

[onemacell]

Te salio el root automatico?, no tengo forma de root esos modelos

la reparacion sale sin root el parche es con root

[cepi]

la reparacion sale sin root el parche es con root

si eso lo se, por eso pregunto por el root ahi muestra el parche

[cepi]

Repara G610M degradando y cambiando modem y sigue en NG, sin señal

Edito: si me tomo señal

Mensaje modificado por cepi el Feb 14 2019, 08:16 AM

[cepi]

SM-G570M BIT 2 tambien sale con exito 100% testiado, OJO!!! Solo android 6.0.1...

y el root como te salio?

[apazam]

Alguien sabe como activar modo OEM en el j600g? Chimera hace la reparacion pero no hay forma de activar OEM para hacer root

p/d: Recien chatee via skype con el soporte de chimera y dicen que estan por sacar una solucion en los proximos dias, esperemos que no sea chamuyo...

Mensaje modificado por apazam el Feb 14 2019, 09:29 AM

[visualriver]

SM-G950F binario 1

La primera vez salió error. La segunda pasó normal. Demora 2 0 3 minutos para levantar la señal.

Chimera Mobile Phone Utility version: 20.22.2159 @ 2019-02-14
Printing phone history

Patch Certificate
14/02/2019
14:21:45

Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G950F
Sales Code: XEU
Country Code: UK & IRE
Timezone: America/Lima
Android Version: 8.0.0 [R16NW] [SDK 26]
Build Date: Mon Feb 19 23:32:41 KST 2018
PDA Version: G950FXXU1CRB7 [february 2018, rev7]
Phone Version: G950FXXU1CRAP [january 2018, revP]
CSC Version: G950FOXM1CRAP [january 2018, revP]
Product Code: XEU
HIDSw Version: G950FXXU1CRB7/G950FOXM1CRAP/G950FXXU1CRAP/G950FXXU1CRB7
Board Platform: EXYNOS5
Modem Platform: SHANNON355
Serial Number: RF8JB2M9JDV
Imei: 3590420863xxxxxx
Unique Number: CE081718D8A8871E05
Connections: AT,MTP
Battery Status: 3.81V (46%)
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2018-02-01
Data Encryption State: unsupported
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
Checking boot image. Be patient! Do NOT disconnect the phone!
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
Communicating with the server. Be patient! Do NOT disconnect the phone!
Patchcert will not work. Reinstall the phone firmware.
Unable to patch certificate.
Finished at local time: [02.14.19 09:33:54]
WorkID: 52558348




Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G950F
Sales Code: XEU
Country Code: UK & IRE
Timezone: America/Lima
Android Version: 8.0.0 [R16NW] [SDK 26]
Build Date: Mon Feb 19 23:32:41 KST 2018
PDA Version: G950FXXU1CRB7 [february 2018, rev7]
Phone Version: G950FXXU1CRAP [january 2018, revP]
CSC Version: G950FOXM1CRAP [january 2018, revP]
Product Code: XEU
HIDSw Version: G950FXXU1CRB7/G950FOXM1CRAP/G950FXXU1CRAP/G950FXXU1CRB7
Board Platform: EXYNOS5
Modem Platform: SHANNON355
Serial Number: RF8JB2M9JDV
Imei: 3590420863xxxxxxx
Unique Number: CE081718D8A8871E05
Connections: AT,MTP
Battery Status: 3.84V (44%)
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2018-02-01
Data Encryption State: unsupported
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
Checking boot image. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
Communicating with the server. Be patient! Do NOT disconnect the phone!
After the process, the phone can restart once during startup.
Within 20-70 seconds after the phone starts, the signal strength indicator will toggle: signal -> no signal -> signal.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [02.14.19 09:48:26]
WorkID: 52560913

[mary_17]

Repara G610M degradando y cambiando modem y sigue en NG, sin señal

Edito: si me tomo señal

Hola, podes explicar el proceso completo porque tengo uno igual lo degrado con un firmware de Claro hago el proceso pero cuando voy a parchar termina todo OK pero el equipo queda freezado, también hago el proceso con la última versión termina todo Ok el log pero el equipo queda en la pantalla de Panic. Favor de postear el proceso completo en Bit 3 para despejar dudas y no hacer spam, muchas gracias.

[cepi]

Hola, podes explicar el proceso completo porque tengo uno igual lo degrado con un firmware de Claro hago el proceso pero cuando voy a parchar termina todo OK pero el equipo queda freezado, también hago el proceso con la última versión termina todo Ok el log pero el equipo queda en la pantalla de Panic. Favor de postear el proceso completo en Bit 3 para despejar dudas y no hacer spam, muchas gracias.

Repara serial en version 8, despues degradas a la version 7, despues cargas el modem de la version 8 COM, y parchas

[Leonardo123]

SM-G570M BIT 2 tambien sale con exito 100% testiado, OJO!!! Solo android 6.0.1...

este es el flash bit 2


Mensaje modificado por Leonardo123 el Feb 14 2019, 03:43 PM

Fichero(s) Adjunto(s)

 firmware... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 95bytes ) Número de descargas: 1

 

[cepi]

este es el flash bit 2

se degrada pero no deja root

[lenincell2016]

se degrada pero no deja root

aqui esta el root, es con cwm, flasheas el cwm desmarcar el auto reboot, enciendes en modo recovey e isntalas el super su, reboot system y listo root ful probado en bit 1 y 2

Fichero(s) Adjunto(s)

 sm_g570m... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 13.7mb ) Número de descargas: 7

 

[nicoleee]

G950F Imei Repair & Patch Cert

Chimera Mobile Phone Utility version: 20.22.1434

Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G950F
Sales Code: XID
Country Code: INDONESIA
Timezone: Africa/Dar_es_Salaam
Android Version: 8.0.0 [R16NW] [SDK 26]
Build Date: Wed Dec 26 11:34:58 KST 2018
PDA Version: G950FXXS4CRLB [december 2018, revB]
Phone Version: G950FXXU4CRKB [november 2018, revB]
CSC Version: G950FOLE4CRL1 [december 2018, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON355
Serial Number: RF8JA3VVV2M
Imei: 355089.........
Battery Status: 4.01V (79%)
Network Type: GSM
SIM Status: READY,READY
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2019-01-01
Data Encryption State: encrypted
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
Checking boot image. Be patient! Do NOT disconnect the phone!
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
Communicating with the server. Be patient! Do NOT disconnect the phone!
After the process, the phone can restart once during startup.
Within 20-70 seconds after the phone starts, the signal strength indicator will toggle: signal -> no signal -> signal.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [02.14.19 01:41:16]
WorkID: 52535126

Amigo podrias explicar como le hicistes root para parchar tengo uno con ese mismo binario y android y no eh podido podrias decir como hicistes root

[ServiceGSM]

Alguien sabe como activar modo OEM en el j600g? Chimera hace la reparacion pero no hay forma de activar OEM para hacer root

p/d: Recien chatee via skype con el soporte de chimera y dicen que estan por sacar una solucion en los proximos dias, esperemos que no sea chamuyo...

Intentaste activarlo con miracle? Así con el mismo procedimiento de los j7 pro?

[anacondis]

Solución a g610m

Es meter 7.0 u3

Hacer root , reparar f4
Luego meter modem de combination y parchear certificado
Ya probado queda imei status ok y levanta señal.

[Katobe]

exacto asi es como se hace el g610 ayer me llegaron 3 y ese fue el proceso que hice sin problemas y ready solo hay que usar un poco la cabeza para ponerlos a funcionar

[GSMServices]

Tenia y G570m guardado....

Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G570M
Sales Code: PET
Country Code: PERU
Timezone: America/Lima
Android Version: 6.0.1 [MMB29K] [SDK 23]
Build Date: Thu Jul 13 03:46:24 KST 2017
PDA Version: G570MUBU1AQG2 [july 2017, rev2]
Phone Version: G570MUBU1AQG1 [july 2017, rev1]
CSC Version: G570MUWA1AQG3 [july 2017, rev3]
Product Code: SM-G570MZKAPET
HIDSw Version: G570MUBU1AQG2/G570MUWA1AQG3/G570MUBU1AQG1/G570MUBU1AQG2
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: R58JB352XWX
Imei: 3xxxxxxxxxxx96
Unique Number: CQ300E732D28CA4
Connections: AT,MTP
Battery Status: 4.14V (85%)
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2017-07-01
Data Encryption State: encrypted
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
Checking boot image. Be patient! Do NOT disconnect the phone!
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
Communicating with the server. Be patient! Do NOT disconnect the phone!
After the process, the phone can restart once during startup.
Within 20-70 seconds after the phone starts, the signal strength indicator will toggle: signal -> no signal -> signal.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [02.18.19 14:04:32]
WorkID: 52895478

[konami21]

G570M ANDROID 6.0.1 BIT1 SALIO AL 100%