Firmware Rom Para Bello 2 X170g V10a Descarga Ya!!! Solucionado Opciones

[mulock]

esta flash la lei con nck box, deberia de poderse flash con sp flash tool, les recomiendo usar nck para flash ya q fue leida con ella, tambien pueden usar el nck crack que anda en la web.

no olvide dar las gracias, el link esta permanente con mediafire

 leer.txt... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 57bytes ) Número de descargas: 31



edit: el cellular se conecta con volumen arriba y abajo precionado

importante descomprimirlo con 7z o 7zip

Motivo de edición: No abuse de las Mayúsculas

[Anunciante Autorizado]

[frankerebus]

No funciona esta rom en mi caso , o alguna sugerencia adjunto log :

Flash files count is :14
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.8
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM26)
Boot mode: Brom
BBCHIP: 6582 1 ca01
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM27)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Error: Is not posible to write readed firmware in this phone.
This phone will accept only factory signed firmware.
Wait untill phone will start charging.
All done.


y con preloader seleccionado:
tampoco deja :
Error: Is not posible to write readed firmware in this phone.
This phone will accept only factory signed firmware.
Wait untill phone will start charging.
All done.

Mensaje modificado por frankerebus el Jan 23 2019, 03:06 PM

[Daniel V.]

No funciona esta rom en mi caso , o alguna sugerencia adjunto log :

Flash files count is :14
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.8
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM26)
Boot mode: Brom
BBCHIP: 6582 1 ca01
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM27)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Error: Is not posible to write readed firmware in this phone.
This phone will accept only factory signed firmware.
Wait untill phone will start charging.
All done.


y con preloader seleccionado:
tampoco deja :
Error: Is not posible to write readed firmware in this phone.
This phone will accept only factory signed firmware.
Wait untill phone will start charging.
All done.

aqui les dejo el programa y el firmware para el LG x170g

https://www.clangsm.com/forum/index.php?sho...t&p=1935732