Custom Binary Blocked By Secure Boot (modem. Bin) Error S7 Edge G935t Opciones

[seferick]

hola colegas, por aca me he topado con un error que no he podido solucionar.
Trate de instalarle un firmware y me resulto con el error (ver imagen)>>
 1.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 54.79k ) Número de descargas: 0

 2.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 231.84k ) Número de descargas: 0


Despues de tratar de reinstalar el sistema, me lanza el siguiente mensaje "SW REV CHECK FAIL : [boot]Fused 8 > Binary 1"

 3.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 194.25k ) Número de descargas: 0


Me podrian hechar la mano para encontrar una solucion, de antemano gracias.

Mensaje modificado por seferick el Dec 23 2018, 10:33 AM

[Anunciante Autorizado]

[Elhugo_6589]

Creo que trataste de flashear con un binario más bajo que el que tenía, trata de flashear con el firmware más actualizado, por lo menos a mí eso me ha pasado cuando me equivoco de binario

[seferick]

efectivamente compañero, muchas gracias por la pronta respuesta. Logre solucionar con siguiente firmware que se ve en la imagen, no se si es binario 8, a lo mejor si porque me lanzaba error Fused 8, necesitaba binario 8. Bueno aca dejo solucion a similares.

 SOLUCION... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 176.43k ) Número de descargas: 0

[sergiosierra]

Justo me acaba de pasar eso, intentando liberar el modelo SM-G930A, no me arrojaba los códigos de liberación la Octopus, en todos los campos aparecía Not Found y mi equipo estaba en Android 7.0, pensando que fuera la versión de android, procedí a realizar un downgrade de la versión G930AUCS4BQE1 a la versión 6.0.1 G930AUCS4APK1, lamentablemente seguía sin arrojar los códigos.

Procedí a instalar un archivo que compré en una página (si lo necesitan lo puedo subir al Clan) el cual decía lo siguiente:

G930A_G930U_G930P_G930V_G930T_U8_Unlock Problem Fixed
This is Solution Only while you Read Code failed or Incorrect entering Code

Lamentablemente de nada sirvió ya que seguían sin aparecer los códigos, procedí a instalar la Rom Stock, todo el proceso salió perfectamente bien solo que para mi sorpresa el equipo ya no quiso iniciar se quedaba en el error custom binary blocked by secure boot modem.bin, instalé varias Roms y seguía lo mismo, la última opción y la que funcionó fue instalar una Rom con Binario 8 G930AUCS8CRJ2 y con eso inició perfectamente el equipo; además de que con la nueva Rom salió la lectura de cóigos perfectamente, dejo imágenes del proceso y los Logs de operación.

CÓDIGO

INFO : 04/06/2019 16:52:22 > Welcome to Octoplus Box Samsung software version 2.8.0.1
INFO : 04/06/2019 16:58:55 > -----------------------------------------------------------------------------------
INFO : 04/06/2019 16:58:55 > To connect SM-G930F phone you have to perform the following steps:
INFO : 04/06/2019 16:58:55 > 1. Disconnect USB cable from phone.
INFO : 04/06/2019 16:58:55 > 2. Go to Menu->Settings->More->About Device.
INFO : 04/06/2019 16:58:55 > 3. Tap on "Build number" 7 times to enable developer options.
INFO : 04/06/2019 16:58:55 > 4. Go to Menu->Settings->More->Developer options.
INFO : 04/06/2019 16:58:55 > 5. Turn on "USB Debugging" option.
INFO : 04/06/2019 16:59:05 > -----------------------------------------------------------------------------------
INFO : 04/06/2019 16:59:06 > Platform: Samsung Android
INFO : 04/06/2019 16:59:06 > Selected port: COM102
INFO : 04/06/2019 16:59:06 > Selected model: SM-G930A
INFO : 04/06/2019 16:59:06 > Operation: Read Codes
ERROR : 04/06/2019 16:59:10 > Operation was canceled
ERROR : 04/06/2019 16:59:10 > Read codes failed
INFO : 04/06/2019 16:59:12 > Performed by 2.8.0.1 Software version.
INFO : 04/06/2019 17:02:54 > -----------------------------------------------------------------------------------
INFO : 04/06/2019 17:02:54 > Connecting to server...
INFO : 04/06/2019 17:02:55 > Username: sergiosierra
INFO : 04/06/2019 17:02:56 > Authorizing...
INFO : 04/06/2019 17:02:56 > Checking balance...
WARN : 04/06/2019 17:02:56 > Your balance: 151 credits.
INFO : 04/06/2019 17:02:56 > Performed by 2.8.0.1 Software version.
INFO : 04/06/2019 17:15:38 > -----------------------------------------------------------------------------------
INFO : 04/06/2019 17:15:38 > Platform: Samsung Android
INFO : 04/06/2019 17:15:38 > Selected port: COM102
INFO : 04/06/2019 17:15:38 > Selected model: SM-G930A
INFO : 04/06/2019 17:15:38 > Operation: Read Codes
WARN : 04/06/2019 17:15:39 > "Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported!
WARN : 04/06/2019 17:15:39 >
WARN : 04/06/2019 17:15:39 > Make sure device requests to enter unlock code and only then perform “Read Codes” operation!"
WARN : 04/06/2019 17:15:39 >
WARN : 04/06/2019 17:15:39 > Continue?
WARN : 04/06/2019 17:15:39 > Searching for a phone. Please wait...
WARN : 04/06/2019 17:15:41 > Please, press "OK" button on the phone to allow USB debugging.
INFO : 04/06/2019 17:15:44 > Detected phone model: SM-G930A
INFO : 04/06/2019 17:15:44 > Firmware compiled date: Mon May 8 22:49:18 KST 2017
INFO : 04/06/2019 17:15:44 > PDA version: G930AUCS4BQE1
INFO : 04/06/2019 17:15:44 > CSC version: G930AATT4BQE1
INFO : 04/06/2019 17:15:44 > SW version: G930AUCS4BQE1
INFO : 04/06/2019 17:15:45 > Phone SN: R38J3028FEM
INFO : 04/06/2019 17:15:45 > Android version: 7.0 (NRD90M)
INFO : 04/06/2019 17:15:45 > Sales code: ATT
INFO : 04/06/2019 17:15:45 > Country: USA
INFO : 04/06/2019 17:15:45 > HW platform: msm8996
INFO : 04/06/2019 17:15:45 > HW Chip: MSM8996
INFO : 04/06/2019 17:15:45 > HW Modem: MSM8996
INFO : 04/06/2019 17:15:45 > Security patch level: 2017-05-01
INFO : 04/06/2019 17:15:45 > Warranty Void: 0
INFO : 04/06/2019 17:15:45 > SIM 1 status: absent
INFO : 04/06/2019 17:15:45 > Codename: heroqlteuc
INFO : 04/06/2019 17:15:45 > -----------------------------------------------------------------------------------
WARN : 04/06/2019 17:15:45 > Connecting to server ..
INFO : 04/06/2019 17:15:45 > Username: sergiosierra
INFO : 04/06/2019 17:15:47 > Connect to server successfull.
INFO : 04/06/2019 17:15:47 > Checking smart card...
INFO : 04/06/2019 17:15:50 > Smart card successfully checked.
INFO : 04/06/2019 17:15:51 > Your balance: 151 credits.
INFO : 04/06/2019 17:15:51 > -----------------------------------------------------------------------------------
INFO : 04/06/2019 17:15:51 > Rebooting phone
INFO : 04/06/2019 17:15:51 > Searching for a phone. Please wait...
INFO : 04/06/2019 17:17:00 > OK
INFO : 04/06/2019 17:17:01 > Rebooting phone
INFO : 04/06/2019 17:17:01 > Searching for a phone. Please wait...
INFO : 04/06/2019 17:18:02 > OK
INFO : 04/06/2019 17:18:03 > Rebooting phone in Upload Mode...
INFO : 04/06/2019 17:18:28 > Searching for a phone. Please wait...
INFO : 04/06/2019 17:18:36 > OK
INFO : 04/06/2019 17:18:36 > Reading data...
INFO : 04/06/2019 17:19:21 > OK
INFO : 04/06/2019 17:19:30 > Detecting security type...
INFO : 04/06/2019 17:19:33 > (1)
INFO : 04/06/2019 17:19:33 > Searching for signatures...
INFO : 04/06/2019 17:19:59 > OK
WARN : 04/06/2019 17:19:59 > Sending request...
INFO : 04/06/2019 17:20:05 > OK
INFO : 04/06/2019 17:20:05 > Calculating codes. Please wait...
WARN : 04/06/2019 17:20:19 > FREEZE: not found
WARN : 04/06/2019 17:20:20 > NET LOCK: not found
WARN : 04/06/2019 17:20:20 > SUB LOCK: not found
WARN : 04/06/2019 17:20:20 > SP LOCK: not found
WARN : 04/06/2019 17:20:20 > CP LOCK: not found
WARN : 04/06/2019 17:20:20 > Codes were not found. Please do Factory data reset and repeat "Read Codes" operation.
ERROR : 04/06/2019 17:20:20 > Please insert SIM card and try again.
INFO : 04/06/2019 17:20:20 > Performed by 2.8.0.1 Software version.
INFO : 04/06/2019 17:22:34 > -----------------------------------------------------------------------------------

CÓDIGO

Welcome to Octoplus Box Samsung software version 2.8.0.2
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM106
Selected model: SM-G930A
Operation: Read Codes
"Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not
supported!

Make sure device requests to enter unlock code and only then perform
“Read Codes” operation!"

Continue?
Searching for a phone. Please wait...
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G930A
Firmware compiled date: Tue Nov 8 11:46:56 KST 2016
PDA version: G930AUCS4APK1
CSC version: G930AATT4APK1
SW version: G930AUCU8ARJ1
Phone SN: R38J3028FEM
Android version: 6.0.1 (MMB29M)
Sales code: ATT
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2016-11-01
Warranty Void: 0
SIM 1 status: absent
Codename: heroqlteuc
-----------------------------------------------------------------------------------
Connecting to server ..
Username: sergiosierra
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 151 credits.
-----------------------------------------------------------------------------------
Rebooting phone
Searching for a phone. Please wait...OK
Rebooting phone
Searching for a phone. Please wait...OK
Rebooting phone in Upload Mode...
Searching for a phone. Please wait...OK
Reading data...OK
Detecting security type...(1)
Searching for signatures...OK
Sending request...OK
Calculating codes. Please wait...
FREEZE: not found
NET LOCK: not found
SUB LOCK: not found
SP LOCK: not found
CP LOCK: not found
Codes were not found. Please do Factory data reset and repeat "Read
Codes" operation.
Please insert SIM card and try again.
Performed by 2.8.0.2 Software version.

CÓDIGO

Welcome to Octoplus Box Samsung software version 2.8.0.2
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM106
Selected model: SM-G930A
Operation: Read Codes
"Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported!

Make sure device requests to enter unlock code and only then perform “Read Codes” operation!"

Continue?
Searching for a phone. Please wait...
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G930A
Firmware compiled date: Wed Oct 10 18:28:53 KST 2018
PDA version: G930AUCS8CRJ2
CSC version: G930AATT8CRJ2
SW version: G930AUCS8CRJ2
Phone SN: R38J3028FEM
Android version: 8.0.0 (R16NW)
Sales code: ATT
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-10-01
Warranty Void: 0
SIM 1 status: absent
Codename: heroqlteuc
-----------------------------------------------------------------------------------
Connecting to server ..
Username: sergiosierra
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 151 credits.
-----------------------------------------------------------------------------------
Rebooting phone
Searching for a phone. Please wait...OK
Rebooting phone
Searching for a phone. Please wait...OK
Rebooting phone in Upload Mode...
Searching for a phone. Please wait...OK
Reading data...OK
Detecting security type...(1)
Searching for signatures...OK
Sending request...OK
Calculating codes. Please wait...
FREEZE: 26414249
NET LOCK: 64149371
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
Performed by 2.8.0.2 Software version.

Espero que les sea de ayuda esta información.


Saludos!!!