Frp Verykool S5036 Opciones

[jmgc_4]

Se realizo NCK DONGLE 2.5.6.2

abrir la aplicación de nck dongle
Ir a la pestaña de service
En phone settings seleccionar mt6580
presionar el boton de reset frp
conectar el celular apagado y sin pila, se empezara a ejecutar el proceso
una vez que termine el proceso solo es desconectar, poner la pila y encender
configurar el telefono hasta entrar al menu principal, ir a ajustes, activar depuracion y desbloqueo oem
por ultimo restablecer datos de fabrica

aqui el log
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM30)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 25:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM31)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.