Aporte Unlock Lg Sp320 Virgin Boost Sprint Apn Automatico Opciones

[miausi]

Hola amigos

les dejo los pasos para hacer la liberacion del sp320 de cualquier compañia, es muy sencillo, solo 3 pasos...

1._ flasheamos con z3x con el modelo ls751 el siguiente firm US60111c_00_NAO_US_OP_1208 esta en lg firmware y lo descargan de a gratis.

2._ al terminar de flashear se quedara en el logo, hacemos un hard reset con botones, una vez echo ya iniciara y les aparecera en sistema q es el modelo us601

3._ reparamos imei con z3x o con octopus, yo lo hice con octopus y quedo ala primera... reiniciamos y ponemos el sim y listo en automatico agarra el sim

Motivo de edición: No postear publicidad

[Anunciante Autorizado]

[albertojrb93]

Aqui esta el firmware que deben utilizar  US60111c... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2048mb ) Número de descargas: 1229

[deivisguzman]

Hola amigos

les dejo los pasos para hacer la liberacion del sp320 de cualquier compañia, es muy sencillo, solo 3 pasos...

1._ flasheamos con z3x con el modelo ls751 el siguiente firm US60111c_00_NAO_US_OP_1208 esta en lg firmware y lo descargan de a gratis.

2._ al terminar de flashear se quedara en el logo, hacemos un hard reset con botones, una vez echo ya iniciara y les aparecera en sistema q es el modelo us601

3._ reparamos imei con z3x o con octopus, yo lo hice con octopus y quedo ala primera... reiniciamos y ponemos el sim y listo en automatico agarra el sim

permite configurar apn?

[donaldyg81]

Alguien que confirme si funciona por favor.... y otra cuestion, es posible el unlock del sp200 con algun metodo similiar??? Saludos...

Mensaje modificado por LAB_SANTACRUZ el May 12 2020, 09:56 AM

Motivo de edición: respete modismos de escritura , esto no es un chat.

[Yobian]

Alguien que confirme si funciona por favor.... y otra cuestion, es posible el unlock del sp200 con algun metodo similiar??? Saludos...

si funciona yo lo prove me dio un error por el cable pero lo cambie y perfecto cuando termina de flashar se queda en el loga le ases reset y ya el sp320

[martincolon]

Hola amigos

les dejo los pasos para hacer la liberacion del sp320 de cualquier compañia, es muy sencillo, solo 3 pasos...

1._ flasheamos con z3x con el modelo ls751 el siguiente firm US60111c_00_NAO_US_OP_1208 esta en lg firmware y lo descargan de a gratis.

2._ al terminar de flashear se quedara en el logo, hacemos un hard reset con botones, una vez echo ya iniciara y les aparecera en sistema q es el modelo us601

3._ reparamos imei con z3x o con octopus, yo lo hice con octopus y quedo ala primera... reiniciamos y ponemos el sim y listo en automatico agarra el sim
[/quote]

Ayuda por favor, obtengo el sigueinte error al intentar flashear con z3x lg tool:

[quote name='miausi' date='Oct 11 2018, 11:47 AM' post='1898505']

Mensaje modificado por martincolon el Oct 12 2018, 10:13 AM

Fichero(s) Adjunto(s)

 Flash_Lg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 421.73k ) Número de descargas: 0

 

[miausi]

permite configurar apn?

3._ reparamos imei con z3x o con octopus, yo lo hice con octopus y quedo ala primera... reiniciamos y ponemos el sim y listo en automatico agarra el sim

[martincolon]

amigo solo con z3x el flash o con octoplus tambien se podra_?

Si, con octopus se puede flashear hermano, acabo de sacar uno hoy.

[kinglebzul]

No importa la versión de android que se va a flashear?... porque el que tengo trae android 7, no se si valla a quedar brick por que sea un android inferior el de este firmware.

[duri25]

log de octoplus

Bienvenido en Octoplus/Octopus Box LG Software version 2.8.9
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG Qualcomm
Puerto seleccionado: COM48
Modelo seleccionado: LS676
Lectura de la información...
IMEI: 358226-08-040669-6
Android version:
Battery level: 255%
Versión de SW: SP32010b
Mode: Emergency
Initializing flash...OK
Plataforma: mt6750
Versión de SW: SP32010b_00
Android version: 7.1.1
LAF Version: 1.1
Product ID: CT68S170913004552
IMEI: 358226-xxxxxxxxxx
Target operator: SPR
Hardware: rev_10
Abriendo "US60111c_00_NAO_US_OP_1208.kdz"...OK
Firmware version: LGUS601AT-00-V11c-LAO-COM-DEC-08-2017-ARB00+0
Firmware model: LG-US601
Firmware type: 0100
File declared for different phone model!
Performed by 2.8.9 Software version.

[kinglebzul]

Yo me arriesgue y logre flashearlo con octoplus pero me quedo brick solo pegado en el logo, ya hice hard reset y nada sigue igual el mio tenia android 7.1.1, les anexo el log de operaciones les menciono que tuve que convertir el firmware a extensión .oct ya que era .kdz

Checking data...OK
Plataforma: LG Qualcomm
Puerto seleccionado: COM209
Modelo seleccionado: LS751
Lectura de la información...
IMEI: 358226-08-704135-5
Android version:
Battery level: 255%
Versión de SW: SP32010f
Mode: Emergency
Initializing flash...OK
Versión de SW: SP32010f_04
Android version: 7.1.1
LAF Version: 1.1
Product ID: VS02S180808004408
IMEI:
Target operator: SPR
Hardware: rev_10
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Abriendo "US60111c_00_NAO_US_OP_1208.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Escribiendo preloader...OK
Escribiendo pgpt...OK
Escribiendo lk...OK
Escribiendo lk2...OK
Escribiendo laf...OK
Escribiendo boot...OK
Escribiendo recovery...OK
Escribiendo logo...OK
Escribiendo lo_bak_go...OK
Escribiendo secro...OK
Escribiendo tee1...OK
Escribiendo tee2...OK
Escribiendo factory...OK
Escribiendo efuse...OK
Escribiendo md1img...OK
Escribiendo md1dsp...OK
Escribiendo md1arm7...OK
Escribiendo md3img...OK
Escribiendo system...OK
Escribiendo lafbak...OK
Escribiendo sgpt...OK
Escribiendo OP_T...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalización...OK
Writing firmware done!
Performed by 2.8.8 Software version.
Connecting to server support.octoplusbox.com:82...OK
Authorizing...OK

[XavierApplePR]

[quote name='Yobian' date='Oct 12 2018, 08:23 AM' post='1898714']
si funciona yo lo prove me dio un error por el cable pero lo cambie y perfecto cuando termina de flashar se queda en el loga le ases reset y ya el sp320
[/

Saludos, en que version lo hicistes.

[kinglebzul]

Alguien haria el favor de leer el firmware de este equipo y subirlo al clan, olvide hacer un backup y lo tengo brickeado les agradeceria la ayuda, se puede leer al parecer con octoplus, desde ya... gracias!!!

[XCEL-MOVIL]

me arriesgue con un sp200 corriendole la rom del compañero us601, pero me quedo brick, conecta como LGE AndroidNet USB Serial Port pero no logro flashearlo nuevamente con el backup que le ise antes de flashear, alguien tendra un metodo para poder ponerlo modo dowload??? de echo el equipo vibra al prenderlo. quiero ponerlo modo dowload pero no lo hace, al flashear la z3x simplemente se traba y de ahi no pasa.

[movilGSM]

AMIGO SOLO CON Z3X EL FLASH O CON OCTOPLUS TAMBIEN SE PODRA_?

Hola, algo para el SP200? Servira el mismo firmware?
Saludos

Hola amigos

les dejo los pasos para hacer la liberacion del sp320 de cualquier compañia, es muy sencillo, solo 3 pasos...

1._ flasheamos con z3x con el modelo ls751 el siguiente firm US60111c_00_NAO_US_OP_1208 esta en lg firmware y lo descargan de a gratis.

2._ al terminar de flashear se quedara en el logo, hacemos un hard reset con botones, una vez echo ya iniciara y les aparecera en sistema q es el modelo us601

3._ reparamos imei con z3x o con octopus, yo lo hice con octopus y quedo ala primera... reiniciamos y ponemos el sim y listo en automatico agarra el sim

Oiga amigo por favor especifique que version de software que tenia el telefeno que desbloqeo, que opciones puso en Z3X y con que modelo le reparo el IMEI. Ya intente su metodo pero se quedo en el logo y de ahi no sale. Tambien probe repara el imei con Optopus en modo download usando el US601 y da error. Aqui los logs:

CÓDIGO

Welcome to Octoplus/Octopus Box LG Software version 2.8.9
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: US601
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM326
Mode: Emergency
Initializing flash...OK
Model ID: LG-US601
Platform: mt6750
Android version: 7.1.1
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 4294967295%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...Failed!
Fixing IMEI A...
New IMEI A: 358226-08-472276-7
Reading security area...OK
Backup saved to "US601_358226084722767_12-10-2018_23-55-54.EEP"
Patching security...Failed!
Performed by 2.8.9 Software version.

Ayuda por favor.
Saludos

 backup_l... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1648.1mb ) Número de descargas: 51

les dejo el backup del LG LG-SP200

Software verion: SP20013a

Android verion: 7.1.2

Target operator: SPR

Target country: US

Chipset: mt6750

Amigo y pudiste revivir el movil con el backup? Saludos

Hola, alguien que suba un backup de este modelo, SP320 por favor para poder revivir este telef. No hagan este unlock hasta que haya mas informacion. Saludos

[XCEL-MOVIL]

Hola, algo para el SP200? Servira el mismo firmware?
Saludos

no creo amigo... yo probe y termino brick.... en un rato subo el backup del firm que ise con la z3x aver que podemos hacer... ando batallado queriendo revivir.

 backup_l... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1648.1mb ) Número de descargas: 51




les dejo el backup del LG LG-SP200

Software verion: SP20013a

Android verion: 7.1.2

Target operator: SPR

Target country: US

Chipset: mt6750

Mensaje modificado por pablo76 el Oct 13 2018, 05:14 PM

[miausi]

Oiga amigo por favor especifique que version de software que tenia el telefeno que desbloqeo, que opciones puso en Z3X y con que modelo le reparo el IMEI. Ya intente su metodo pero se quedo en el logo y de ahi no sale. Tambien probe repara el imei con Optopus en modo download usando el US601 y da error. Aqui los logs:

CÓDIGO

Welcome to Octoplus/Octopus Box LG Software version 2.8.9
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: US601
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM326
Mode: Emergency
Initializing flash...OK
Model ID: LG-US601
Platform: mt6750
Android version: 7.1.1
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 4294967295%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...Failed!
Fixing IMEI A...
New IMEI A: 358226-08-472276-7
Reading security area...OK
Backup saved to "US601_358226084722767_12-10-2018_23-55-54.EEP"
Patching security...Failed!
Performed by 2.8.9 Software version.

Ayuda por favor.
Saludos

Despues del flasheo debes hacer hard reset con botones. Una vez que inicie con octoplus en modo download le escribes el imei. No hay q mover nada en z3x solo poner el firm y conectar modo download

[movilGSM]

Despues del flasheo debes hacer hard reset con botones. Una vez que inicie con octoplus en modo download le escribes el imei. No hay q mover nada en z3x solo poner el firm y conectar modo download

Si eso exactamente hice, pero lo que te pregunto es que version de software tenia el que hiciste porque el mio estaba en la SP320 V10G y se queda en el LOGO de LG. Ya le he hecho 10 hard resets con botones y nada. Ademas no mencionas que modelo escoges en la octopus para reparar el IMEI.

Estos son los logs del flasheo con Z3X:

CÓDIGO

10/12/2018 11:14:53 PM: LG 2-3G Tool v9.53
10/12/2018 11:14:53 PM: supported models: 1562
10/12/2018 11:14:53 PM:
10/12/2018 11:16:42 PM: Mode: Emergency
10/12/2018 11:16:42 PM: Model: LS751
10/12/2018 11:16:42 PM: Read info...
10/12/2018 11:16:42 PM: Laf Protocol: 01000006
10/12/2018 11:16:43 PM: Model name: LG-SP320
10/12/2018 11:16:43 PM: Software verion: SP32010g
10/12/2018 11:16:43 PM: Android verion: 7.1.1
10/12/2018 11:16:43 PM: Target operator: SPR
10/12/2018 11:16:43 PM: Target country: US
10/12/2018 11:16:43 PM: Chipset: mt6750
10/12/2018 11:16:44 PM: IMEI1: 358226084722767
10/12/2018 11:16:44 PM: IMEI2: 350305260000001
10/12/2018 11:16:45 PM: Elapsed: 3 secs. --> (v9.53)
10/12/2018 11:16:45 PM:  
10/12/2018 11:17:25 PM: Mode: Emergency
10/12/2018 11:17:25 PM: Model: LS751
10/12/2018 11:17:25 PM: Read info...
10/12/2018 11:17:25 PM: Laf Protocol: 01000006
10/12/2018 11:17:26 PM: Model name: LG-SP320
10/12/2018 11:17:26 PM: Software verion: SP32010g
10/12/2018 11:17:26 PM: Android verion: 7.1.1
10/12/2018 11:17:26 PM: Target operator: SPR
10/12/2018 11:17:26 PM: Target country: US
10/12/2018 11:17:26 PM: Chipset: mt6750
10/12/2018 11:17:27 PM: IMEI1: 358226084722767
10/12/2018 11:17:27 PM: IMEI2: 350305260000001
10/12/2018 11:17:27 PM: Elapsed: 3 secs. --> (v9.53)
10/12/2018 11:17:27 PM:  
10/12/2018 11:17:27 PM: Phone mode is
10/12/2018 11:17:28 PM: DOWNLOAD
10/12/2018 11:17:28 PM: Start flashing.
10/12/2018 11:17:28 PM: Laf Protocol: 01000006
10/12/2018 11:17:29 PM:   Open KDZ File : D:\LG\Sp320 unlock\US60111c_00_NAO_US_OP_1208.kdz
10/12/2018 11:17:29 PM: Checking file hash...
10/12/2018 11:17:48 PM:   Model : LG-US601
10/12/2018 11:17:48 PM:   SwVersion : LGUS601AT-00-V11c-LAO-COM-DEC-08-2017-ARB00+0
10/12/2018 11:17:48 PM:   BuildTime : 0000-00-00 00:00:00
10/12/2018 11:17:48 PM:   Total Files : 68
10/12/2018 11:17:48 PM: Model name: LG-SP320
10/12/2018 11:17:48 PM: Software verion: SP32010g
10/12/2018 11:17:48 PM: Android verion: 7.1.1
10/12/2018 11:17:48 PM: Target operator: SPR
10/12/2018 11:17:48 PM: Target country: US
10/12/2018 11:17:48 PM: Chipset: mt6750
10/12/2018 11:17:49 PM: IMEI1: 358226084722767
10/12/2018 11:17:49 PM: IMEI2: 350305260000001
10/12/2018 11:18:01 PM: Laf cmd error: LAF_CMD_UNLINK fail[LAF_ERROR_UNKNOWN[80000119]].
10/12/2018 11:18:01 PM: Start direct download mode
10/12/2018 11:18:01 PM: Write MTK Bootloader...
10/12/2018 11:18:01 PM: done
10/12/2018 11:18:02 PM: Skip "preloader" partition #1 of 68
10/12/2018 11:18:02 PM: Write "pgpt" partition #2 of 68
10/12/2018 11:18:02 PM: Write "lk" partition #3 of 68
10/12/2018 11:18:02 PM: Write "lk2" partition #4 of 68
10/12/2018 11:18:02 PM: Write "laf" partition #5 of 68
10/12/2018 11:18:04 PM: Write "boot" partition #6 of 68
10/12/2018 11:18:05 PM: Write "recovery" partition #7 of 68
10/12/2018 11:18:07 PM: Write "logo" partition #8 of 68
10/12/2018 11:18:07 PM: Write "lo_bak_go" partition #9 of 68
10/12/2018 11:18:08 PM: Write "secro" partition #10 of 68
10/12/2018 11:18:08 PM: Write "tee1" partition #11 of 68
10/12/2018 11:18:08 PM: Write "tee2" partition #12 of 68
10/12/2018 11:18:08 PM: Skip "rct" partition #13 of 68
10/12/2018 11:18:08 PM: Write "factory" partition #14 of 68
10/12/2018 11:18:08 PM: Write "efuse" partition #15 of 68
10/12/2018 11:18:08 PM: Write "md1img" partition #16 of 68
10/12/2018 11:18:09 PM: Write "md1dsp" partition #17 of 68
10/12/2018 11:18:09 PM: Write "md1arm7" partition #18 of 68
10/12/2018 11:18:09 PM: Write "md3img" partition #19 of 68
10/12/2018 11:18:10 PM: Write "system" partition #20 of 68
10/12/2018 11:18:22 PM: Write "system" partition #21 of 68
10/12/2018 11:18:22 PM: Write "system" partition #22 of 68
10/12/2018 11:18:34 PM: Write "system" partition #23 of 68
10/12/2018 11:18:46 PM: Write "system" partition #24 of 68
10/12/2018 11:18:46 PM: Write "system" partition #25 of 68
10/12/2018 11:18:58 PM: Write "system" partition #26 of 68
10/12/2018 11:19:10 PM: Write "system" partition #27 of 68
10/12/2018 11:19:10 PM: Write "system" partition #28 of 68
10/12/2018 11:19:22 PM: Write "system" partition #29 of 68
10/12/2018 11:19:34 PM: Write "system" partition #30 of 68
10/12/2018 11:19:34 PM: Write "system" partition #31 of 68
10/12/2018 11:19:46 PM: Write "system" partition #32 of 68
10/12/2018 11:19:58 PM: Write "system" partition #33 of 68
10/12/2018 11:19:58 PM: Write "system" partition #34 of 68
10/12/2018 11:20:10 PM: Write "system" partition #35 of 68
10/12/2018 11:20:13 PM: Write "system" partition #36 of 68
10/12/2018 11:20:13 PM: Write "system" partition #37 of 68
10/12/2018 11:20:13 PM: Write "system" partition #38 of 68
10/12/2018 11:20:13 PM: Write "system" partition #39 of 68
10/12/2018 11:20:13 PM: Write "system" partition #40 of 68
10/12/2018 11:20:13 PM: Write "system" partition #41 of 68
10/12/2018 11:20:26 PM: Write "system" partition #42 of 68
10/12/2018 11:20:38 PM: Write "system" partition #43 of 68
10/12/2018 11:20:50 PM: Write "system" partition #44 of 68
10/12/2018 11:21:02 PM: Write "system" partition #45 of 68
10/12/2018 11:21:15 PM: Write "system" partition #46 of 68
10/12/2018 11:21:27 PM: Write "system" partition #47 of 68
10/12/2018 11:21:40 PM: Write "system" partition #48 of 68
10/12/2018 11:21:53 PM: Write "system" partition #49 of 68
10/12/2018 11:22:06 PM: Write "system" partition #50 of 68
10/12/2018 11:22:18 PM: Write "system" partition #51 of 68
10/12/2018 11:22:31 PM: Write "system" partition #52 of 68
10/12/2018 11:22:44 PM: Write "system" partition #53 of 68
10/12/2018 11:22:44 PM: Write "system" partition #54 of 68
10/12/2018 11:22:57 PM: Write "system" partition #55 of 68
10/12/2018 11:23:09 PM: Write "system" partition #56 of 68
10/12/2018 11:23:10 PM: Write "system" partition #57 of 68
10/12/2018 11:23:22 PM: Write "system" partition #58 of 68
10/12/2018 11:23:34 PM: Write "system" partition #59 of 68
10/12/2018 11:23:47 PM: Write "system" partition #60 of 68
10/12/2018 11:24:00 PM: Write "system" partition #61 of 68
10/12/2018 11:24:07 PM: Write "system" partition #62 of 68
10/12/2018 11:24:07 PM: Write "system" partition #63 of 68
10/12/2018 11:24:07 PM: Write "system" partition #64 of 68
10/12/2018 11:24:07 PM: Write "system" partition #65 of 68
10/12/2018 11:24:20 PM: Write "lafbak" partition #66 of 68
10/12/2018 11:24:22 PM: Write "sgpt" partition #67 of 68
10/12/2018 11:24:22 PM: Write "OP_T" partition #68 of 68
10/12/2018 11:24:34 PM: Erase "rct" partition
10/12/2018 11:24:38 PM: Done.
10/12/2018 11:24:38 PM: Elapsed: 430 secs. --> (v9.53)
10/12/2018 11:24:38 PM:

Ayuda por favor.

Mensaje modificado por movilGSM el Oct 13 2018, 09:48 AM

[martincolon]

Q modelo selecionaste por que me dice modelo no corresponde

Modelo US601, el mismo modelo del sofware que vas a flashear

[movilGSM]

Modelo US601, el mismo modelo del sofware que vas a flashear

Si, todo esta muy bonito pero no me funciona. Aqui les tengo unos logs con octopus que no me deja repara el imei ni flashear el firmware:

CÓDIGO

Welcome to Octoplus/Octopus Box LG Software version 2.8.9
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: US601
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM326
Mode: Emergency
Initializing flash...OK
Model ID: LG-US601
Platform: mt6750
Android version: 7.1.1
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 4294967295%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...Failed!
Fixing IMEI A...
New IMEI A: 358226-08-472276-7
Reading security area...OK
Backup saved to "US601_358226084722767_13-10-2018_11-33-50.EEP"
Patching security...Failed!
Performed by 2.8.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: US601
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM823
Mode: Emergency
Initializing flash...OK
Model ID: LG-US601
Platform: mt6750
Android version: 7.1.1
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 4294967295%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Opening "US60112c_00_NAO_US_OP_0409.kdz"...OK
Firmware version: LGUS601AT-00-V12c-LAO-COM-APR-09-2018-ARB00
+0
Firmware model: LG-US601
Sending signature...OK
Prepairing firmware...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing 1/69 preloader_0.bin...OK
Writing 2/69 pgpt_0.bin...OK
Writing 3/69 lk_98304.bin...OK
Writing 4/69 lk2_100352.bin...OK
Writing 5/69 laf_102400.bin...OK
Writing 6/69 boot_160768.bin...OK
Writing 7/69 recovery_196608.bin...OK
Writing 8/69 logo_274432.bin...OK
Writing 9/69 lo_bak_go_290816.bin...OK
Writing 10/69 secro_360448.bin...OK
Writing 11/69 tee1_393216.bin...OK
Writing 12/69 tee2_403456.bin...OK
Writing 13/69 rct_579584.bin...OK
Writing 14/69 factory_581632.bin...OK
Writing 15/69 efuse_696320.bin...OK
Writing 16/69 md1img_950272.bin...OK
Writing 17/69 md1dsp_999424.bin...OK
Writing 18/69 md1arm7_1007616.bin...OK
Writing 19/69 md3img_1013760.bin...OK
Writing 20/69 system_1048576.bin...Failed!
LAF Error: 00000000.
Write Firmware operation is currently not supported for your phone's
firmware.
Error code: ZXLCALSZXC
Performed by 2.8.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: US601
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM326
Mode: Emergency
Initializing flash...OK
Model ID: LG-US601
Platform: mt6750
Android version: 7.1.1
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 4294967295%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Opening "US60112c_00_NAO_US_OP_0409.kdz"...OK
Firmware version: LGUS601AT-00-V12c-LAO-COM-APR-09-2018-ARB00
+0
Firmware model: LG-US601
Sending signature...OK
Prepairing firmware...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing 1/69 preloader_0.bin...OK
Writing 2/69 pgpt_0.bin...OK
Writing 3/69 lk_98304.bin...OK
Writing 4/69 lk2_100352.bin...OK
Writing 5/69 laf_102400.bin...OK
Writing 6/69 boot_160768.bin...OK
Writing 7/69 recovery_196608.bin...OK
Writing 8/69 logo_274432.bin...OK
Writing 9/69 lo_bak_go_290816.bin...OK
Writing 10/69 secro_360448.bin...OK
Writing 11/69 tee1_393216.bin...OK
Writing 12/69 tee2_403456.bin...OK
Writing 13/69 rct_579584.bin...OK
Writing 14/69 factory_581632.bin...OK
Writing 15/69 efuse_696320.bin...OK
Writing 16/69 md1img_950272.bin...OK
Writing 17/69 md1dsp_999424.bin...OK
Writing 18/69 md1arm7_1007616.bin...OK
Writing 19/69 md3img_1013760.bin...OK
Writing 20/69 system_1048576.bin...Failed!
LAF Error: 00000000.
Write Firmware operation is currently not supported for your phone's
firmware.
Error code: ZXLCALSZXC
Performed by 2.8.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: US601
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM326
Mode: Emergency
Initializing flash...OK
Model ID: LG-US601
Platform: mt6750
Android version: 7.1.1
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 4294967295%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Opening "US60111c_00_NAO_US_OP_1208.kdz"...OK
Firmware version: LGUS601AT-00-V11c-LAO-COM-DEC-08-2017-ARB00+
0
Firmware model: LG-US601
Sending signature...OK
Prepairing firmware...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing 1/68 preloader_0.bin...OK
Writing 2/68 pgpt_0.bin...OK
Writing 3/68 lk_98304.bin...OK
Writing 4/68 lk2_100352.bin...OK
Writing 5/68 laf_102400.bin...OK
Writing 6/68 boot_160768.bin...OK
Writing 7/68 recovery_196608.bin...OK
Writing 8/68 logo_274432.bin...OK
Writing 9/68 lo_bak_go_290816.bin...OK
Writing 10/68 secro_360448.bin...OK
Writing 11/68 tee1_393216.bin...OK
Writing 12/68 tee2_403456.bin...OK
Writing 13/68 rct_579584.bin...OK
Writing 14/68 factory_581632.bin...OK
Writing 15/68 efuse_696320.bin...OK
Writing 16/68 md1img_950272.bin...OK
Writing 17/68 md1dsp_999424.bin...OK
Writing 18/68 md1arm7_1007616.bin...OK
Writing 19/68 md3img_1013760.bin...OK
Writing 20/68 system_1048576.bin...OK
Writing 21/68 system_1312768.bin...OK
Writing 22/68 system_1316864.bin...Failed!
LAF Error: 00000000.
Write Firmware operation is currently not supported for your phone's
firmware.
Error code: ZXLCALSZXC
Performed by 2.8.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: US601
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM326
Mode: Emergency
Initializing flash...OK
Model ID: LG-US601
Platform: mt6750
Android version: 7.1.1
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 4294967295%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Opening "US60111c_00_NAO_US_OP_1208.kdz"...OK
Firmware version: LGUS601AT-00-V11c-LAO-COM-DEC-08-2017-ARB00+
0
Firmware model: LG-US601
Sending signature...OK
Prepairing firmware...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing 1/68 preloader_0.bin...OK
Writing 2/68 pgpt_0.bin...OK
Writing 3/68 lk_98304.bin...OK
Writing 4/68 lk2_100352.bin...OK
Writing 5/68 laf_102400.bin...OK
Writing 6/68 boot_160768.bin...OK
Writing 7/68 recovery_196608.bin...OK
Writing 8/68 logo_274432.bin...OK
Writing 9/68 lo_bak_go_290816.bin...OK
Writing 10/68 secro_360448.bin...OK
Writing 11/68 tee1_393216.bin...OK
Writing 12/68 tee2_403456.bin...OK
Writing 13/68 rct_579584.bin...OK
Writing 14/68 factory_581632.bin...OK
Writing 15/68 efuse_696320.bin...OK
Writing 16/68 md1img_950272.bin...OK
Writing 17/68 md1dsp_999424.bin...OK
Writing 18/68 md1arm7_1007616.bin...OK
Writing 19/68 md3img_1013760.bin...OK
Writing 20/68 system_1048576.bin...OK
Writing 21/68 system_1312768.bin...OK
Writing 22/68 system_1316864.bin...Failed!
LAF Error: 00000000.
Write Firmware operation is currently not supported for your phone's
firmware.
Error code: ZXLCALSZXC
Performed by 2.8.9 Software version.

Por favor si alguien tiene un backup de este modelo seria ideal.