Idol 4s 6071w Cuenta De Recuperacion |
Bienvenido, invitado ( Identificarse | Registrarse )
![]() ![]() |
Idol 4s 6071w Cuenta De Recuperacion |
Aug 7 2018, 01:54 PM
Publicado:
#1
|
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 223 Agradecimientos: 111 Registrado: 24-June 09 Miembro No.: 44,131 |
hola amigos podrian ayudarme con un alcatel idol 4s modelo 6071w que tiene cuenta de recuperacion ligado al inicio el sistema operativo es windows de antemano gracias
|
|
|
|
| Anunciante Autorizado |
Aug 7 2018, 01:54 PM
Publicado:
#
|
![]() Estas ofertas pudieran interesarte. |
|
|
|
|
Aug 31 2018, 09:52 PM
Publicado:
#2
|
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 99 Agradecimientos: 77 Registrado: 4-April 12 Miembro No.: 325,180 |
Pueden usar Sigmakey. Este es el procedimiento:
Procedure: Select "Qualcomm" platform from the tab menu in the upper left side of the software Go to "Service" tab Select your model in the right “Phone model” drop-down list Turn the phone OFF Connect your phone to PC with USB cable Wait up to 30 seconds while the diagnostic port appears (your phone will be in charging mode). If diagnostic port is not detected, power the phone ON and activate it by dialing ##2324#. Then select diag port in the ports tab. Install required drivers Select diagnostic port Press “Remove FRP” button The message "Removing FRP lock...Done" indicates that procedure has been completed successfully Warning: This feature will erase all phone’s data and accounts If after FRP removal user data was not wiped automatically, perform this procedure manually in the recovery mode. Aqui en link: https://sigmakey.com/en/supportedfeatures/h...p;phone_id=3748 Comenten resultados y siempre que sea posible hagan backup de todo Mensaje modificado por LAB_SANTACRUZ el Oct 16 2021, 05:58 PM
Motivo de edición: Prohibido dar publicidad a otro foro o página externa o ajena a clangsm, los aportes se comparten aqui mismo en el foro
|
|
|
|
Oct 13 2021, 07:50 PM
Publicado:
#3
|
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 83 Agradecimientos: 136 Registrado: 9-July 11 Miembro No.: 229,179 |
Pueden usar Sigmakey. Este es el procedimiento: Procedure: Select "Qualcomm" platform from the tab menu in the upper left side of the software Go to "Service" tab Select your model in the right “Phone model” drop-down list Turn the phone OFF Connect your phone to PC with USB cable Wait up to 30 seconds while the diagnostic port appears (your phone will be in charging mode). If diagnostic port is not detected, power the phone ON and activate it by dialing ##2324#. Then select diag port in the ports tab. Install required drivers Select diagnostic port Press “Remove FRP” button The message "Removing FRP lock...Done" indicates that procedure has been completed successfully Warning: This feature will erase all phone’s data and accounts If after FRP removal user data was not wiped automatically, perform this procedure manually in the recovery mode. Aqui en link: https://sigmakey.com/en/supportedfeatures/h...p;phone_id=3748 Comenten resultados y siempre que sea posible hagan backup de todo No publiques solo por publicar el equipo es de Windows no Android |
|
|
|
![]() ![]() |
| Ver Visitas | Fecha y Hora actual: 19th April 2026 - 12:47 AM |