Unlock Samsung G955u S8 Tmobile |
 |
|
Bienvenido, invitado ( Identificarse | Registrarse )
  |
Unlock Samsung G955u S8 Tmobile |
 Dec 30 2017, 06:09 PM
Publicado:
#1
|
|
 Colaborador del Clan  Grupo: Miembros Mensajes: 589 Agradecimientos: 1402 Registrado: 20-November 10 Desde: USA Miembro No.: 153,098 Pais: 
 |
solo es cuestion de tener los creditos y direct unlock, no tienes que rootear ni nada solo depuracion usb, aclaro este s8 plus era
de t-mobile con su aplicacion device unlock y aun asi libero directamente.. aqui mi log de operacion UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Type *#0808# and select 'DM+ACM+ADB'. 3. Run dialer and type *#0*# (service mode will apear). 4. Connect the phone to USB cable, choose correct COM port in port settings. 5. Press 'Unlock' button. 6. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-G955U Selected port: COM11 SAMSUNG Mobile USB Serial Port Software version: 30.2.2 Checking Login and Password... OK Ballance: 10 crd. You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G955U Android version: 7.0 Product code: SM-G955UZKATMB Phone version: G955USQS2BQL1 PDA version: G955USQS2BQL1 CSC version: G955UOYN2BQL1 CSC country code: USA CSC sales code: TMB HW version: REV1.0 Phone SN: R28J40S74FZ Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-12-01 RF cal date: 2017.04.09 IMEI: ..-------- Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM24 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.2.2 |
 |
 
|
A continuacion 2 usuario(s) le Agradece(n) a elmasterttt por su Colaboracion: alexander1219, felix_the_cat | |
| Anunciante Autorizado |
Dec 30 2017, 06:09 PM
Publicado:
#
|
 Estas ofertas pudieran interesarte. |
|
|
|
|
|
Jan 1 2018, 02:52 PM
Publicado:
#2
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 66 Agradecimientos: 24 Registrado: 18-March 17 Desde: Usa Miembro No.: 934,876 Pais: 
|
CITA(elmasterttt @ Dec 30 2017, 07:09 PM)  solo es cuestion de tener los creditos y direct unlock, no tienes que rootear ni nada solo depuracion usb, aclaro este s8 plus era de t-mobile con su aplicacion device unlock y aun asi libero directamente.. aqui mi log de operacion UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Type *#0808# and select 'DM+ACM+ADB'. 3. Run dialer and type *#0*# (service mode will apear). 4. Connect the phone to USB cable, choose correct COM port in port settings. 5. Press 'Unlock' button. 6. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-G955U Selected port: COM11 SAMSUNG Mobile USB Serial Port Software version: 30.2.2 Checking Login and Password... OK Ballance: 10 crd. You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G955U Android version: 7.0 Product code: SM-G955UZKATMB Phone version: G955USQS2BQL1 PDA version: G955USQS2BQL1 CSC version: G955UOYN2BQL1 CSC country code: USA CSC sales code: TMB HW version: REV1.0 Phone SN: R28J40S74FZ Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-12-01 RF cal date: 2017.04.09 IMEI: ..-------- Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM24 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.2.2 compañero tengo un G935T y estoy pensando en comprar los creditos para hacer el unlock no es necesario instalar ningun archivo para hacer el desbloqueo cierto? |
|
|
|
|
Jan 1 2018, 03:17 PM
Publicado:
#3
|
|
 Miembro del Clan Grupo: Expulsados Mensajes: 221 Agradecimientos: 934 Registrado: 21-February 17 Desde: Worldwide Miembro No.: 927,691 Pais: 
|
CITA(dennks @ Jan 1 2018, 01:52 PM) compañero tengo un G935T y estoy pensando en comprar los creditos para hacer el unlock no es necesario instalar ningun archivo para hacer el desbloqueo cierto? No amigo, solo depuracion USB, el programa de Z3X lo hace en automatico. -------------------- Aprendiendo cada dia y estudiando se supera uno, no regales tu trabajo y vuelvete mejor cada dia. Todos somos hermanos y colegas, agradecer al que te ayuda es simbolo de amistad. Mis herramientas con mucho esfuerzo.         |
|
|
|
|
Jan 29 2018, 05:38 PM
Publicado:
#4
|
|
|
Maestro del Clan Grupo: Miembros Mensajes: 1,364 Agradecimientos: 679 Registrado: 30-August 12 Desde: new york Miembro No.: 379,238 Pais: 
|
con s3x via server tmobile batalle con samkey y perdi los creditos y solo me toco darle con la z3x
UNLOCK INSTRUCCIONES: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Type *#0808# and select 'DM+ACM+ADB'. 3. Run dialer and type *#0*# (service mode will apear). 4. Connect the phone to USB cable, choose correct COM port in port settings. 5. Press 'Unlock' button. 6. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-G955U Software version: 30.5 Checking Login and Password... Listo Ballance: 20 crd. You have 20 credit(s) left. This operation takes 10 credits.Continue? Si Waiting ADB device... Listo Leyendo información del teléfono ... Modelo: SM-G955U Android version: 7.0 Código del Producto: SM-G955UZVATMB Versión del telefono: G955USQU1AQEF PDA version: G955USQU1AQEF CSC version: G955UOYN1AQEF Código de país CSC: USA Código de Venta CSC: TMB HW version: REV1.0 Phone SN: R28J63CAPRT Chip name: MSM8998 Módem: MSM8998 Security patch: 2017-05-01 RF cal date: 2017.06.27 IMEI: 34 Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Lectura de datos desde el teléfono ... Listo Rebooting to upload... Listo Searching Ramdump interface... COM6 detected Lectura de datos desde el teléfono ... Listo Calculando... Listo Buscando servidor... Listo Waiting for server answer... Listo Waiting ADB device... Listo Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Lectura de datos desde el teléfono ... Listo Reiniciando teléfono ... Listo Desbloqueo Listo Done with Samsung Tool PRO v.30.5 -------------------- [size="4"][/size]dongle sigma key nck key furios key
vygis box nck box gcpro key cycone box ufs saras box magma box inferno key z3x octopux box |
|
|
|
|
Jan 29 2018, 05:38 PM
Publicado:
#5
|
|
|
Maestro del Clan Grupo: Miembros Mensajes: 1,364 Agradecimientos: 679 Registrado: 30-August 12 Desde: new york Miembro No.: 379,238 Pais:
|
con s3x via server tmobile batalle con samkey y perdi los creditos y solo me toco darle con la z3x
UNLOCK INSTRUCCIONES: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Type *#0808# and select 'DM+ACM+ADB'. 3. Run dialer and type *#0*# (service mode will apear). 4. Connect the phone to USB cable, choose correct COM port in port settings. 5. Press 'Unlock' button. 6. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-G955U Software version: 30.5 Checking Login and Password... Listo Ballance: 20 crd. You have 20 credit(s) left. This operation takes 10 credits.Continue? Si Waiting ADB device... Listo Leyendo información del teléfono ... Modelo: SM-G955U Android version: 7.0 Código del Producto: SM-G955UZVATMB Versión del telefono: G955USQU1AQEF PDA version: G955USQU1AQEF CSC version: G955UOYN1AQEF Código de país CSC: USA Código de Venta CSC: TMB HW version: REV1.0 Phone SN: R28J63CAPRT Chip name: MSM8998 Módem: MSM8998 Security patch: 2017-05-01 RF cal date: 2017.06.27 IMEI: 34 Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Lectura de datos desde el teléfono ... Listo Rebooting to upload... Listo Searching Ramdump interface... COM6 detected Lectura de datos desde el teléfono ... Listo Calculando... Listo Buscando servidor... Listo Waiting for server answer... Listo Waiting ADB device... Listo Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Lectura de datos desde el teléfono ... Listo Reiniciando teléfono ... Listo Desbloqueo Listo Done with Samsung Tool PRO v.30.5 -------------------- [size="4"][/size]dongle sigma key nck key furios key
vygis box nck box gcpro key cycone box ufs saras box magma box inferno key z3x octopux box |
|
|
|
 Apr 17 2018, 06:45 PM
Publicado:
#6
|
|
 Miembro del Clan Grupo: Miembros Mensajes: 267 Agradecimientos: 242 Registrado: 22-October 10 Desde: USA Miembro No.: 144,395 Pais:
|
Probado con z3x
UNLOCK INSTRUCCIONES: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Type *#0808# and select 'DM+ACM+ADB'. 3. Run dialer and type *#0*# (service mode will appear). 4. Connect the phone to USB cable, choose correct COM port in port settings. 5. Press 'Unlock' button. 6. Paste MSL code in new opened window and press 'OK'. Unlocking using Server: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings) Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-G955U Selected port: COM165 SAMSUNG Mobile USB Serial Port Software version: 31.3 Checking Login and Password... Listo Ballance: 25 crd. You have 25 credit(s) left. This operation takes 10 credits.Continue? Si Waiting ADB device... Listo Leyendo información del teléfono ... Modelo: SM-G955U Android version: 7.0 PDA version: G955USQS2BRB1 CSC version: G955UOYN2BRB1 Versión del telefono: G955USQS2BRB1 Código del Producto: SM-G955UZVATMB Código de país CSC: USA Código de Venta CSC: TMB Phone SN: R28J733JN2E IMEI: -------------------- HW version: REV1.0 RF cal date: 2017.07.25 Chip name: MSM8998 Módem: MSM8998 Security patch: 2018-02-01 Boot Warranty bit: 0 Reiniciando teléfono ... Listo Waiting ADB device... Listo Reiniciando teléfono ... Listo Waiting ADB device... Listo Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Lectura de datos desde el teléfono ... Listo Rebooting to upload... Listo Searching Ramdump interface... COM12 detected Lectura de datos desde el teléfono ... Listo Calculando... Listo Buscando servidor... Listo Waiting for server answer... Listo Waiting ADB device... Listo Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Lectura de datos desde el teléfono ... Listo Reiniciando teléfono ... Listo Desbloqueo Listo Done with Samsung Tool PRO v.31.3 |
|
|
|
|
Apr 24 2018, 09:22 PM
Publicado:
#7
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 6 Agradecimientos: 3 Registrado: 10-August 17 Miembro No.: 977,517 Pais: 
|
Muy buenas noches amigos eh leido todo y solo tengo una duda cuanto de credito le consumio la liberada de este samsung s8 de t mobile solo esa duda tengo de ante mano mucha gracias y quedo a la espera de su respuesta feliz noche gran pagina!
|
|
|
|
|
Apr 24 2018, 09:49 PM
Publicado:
#8
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 111 Agradecimientos: 115 Registrado: 11-January 16 Miembro No.: 787,387 Pais: 
|
CITA(Joker79 @ Apr 24 2018, 10:22 PM) Muy buenas noches amigos eh leido todo y solo tengo una duda cuanto de credito le consumio la liberada de este samsung s8 de t mobile solo esa duda tengo de ante mano mucha gracias y quedo a la espera de su respuesta feliz noche gran pagina! buenas noches son 10 créditos por cada teléfono mi estimado... saludos |
|
|
|
|
Apr 27 2018, 11:49 PM
Publicado:
#9
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 6 Agradecimientos: 3 Registrado: 10-August 17 Miembro No.: 977,517 Pais:
|
Hola amigos de esta gran pagina muy buenas noches disculpen que les mooeste con otra pregunta de nuevo pero se me acaba de generar una duda mas y es esta que si este celular tiene reporte de algo como alguna deuda de pago siempre se puede liberar con este metodo en la caja z3x esa es mi nueva duda y hay disculpen las molestias de ante mano mil gracias porque ayudarnos en esta gran pagina bendiciones!
|
|
|
|
|
Apr 28 2018, 03:09 PM
Publicado:
#10
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 139 Agradecimientos: 87 Registrado: 24-May 16 Miembro No.: 832,139 Pais: 
|
No sr si esta en lista negra perderia los creditos este metodo es para desbloqueo de red,para q sirva para cualquier operador,no es reparacion de ixxx.
|
|
|
|
|
Jun 15 2018, 09:10 AM
Publicado:
#11
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 150 Agradecimientos: 277 Registrado: 9-April 12 Desde: USA Miembro No.: 326,877 Pais:
|
CITA(zumy @ Jan 29 2018, 06:38 PM) con s3x via server tmobile batalle con samkey y perdi los creditos y solo me toco darle con la z3x UNLOCK INSTRUCCIONES: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Type *#0808# and select 'DM+ACM+ADB'. 3. Run dialer and type *#0*# (service mode will apear). 4. Connect the phone to USB cable, choose correct COM port in port settings. 5. Press 'Unlock' button. 6. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-G955U Software version: 30.5 Checking Login and Password... Listo Ballance: 20 crd. You have 20 credit(s) left. This operation takes 10 credits.Continue? Si Waiting ADB device... Listo Leyendo información del teléfono ... Modelo: SM-G955U Android version: 7.0 Código del Producto: SM-G955UZVATMB Versión del telefono: G955USQU1AQEF PDA version: G955USQU1AQEF CSC version: G955UOYN1AQEF Código de país CSC: USA Código de Venta CSC: TMB HW version: REV1.0 Phone SN: R28J63CAPRT Chip name: MSM8998 Módem: MSM8998 Security patch: 2017-05-01 RF cal date: 2017.06.27 IMEI: 34 Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Lectura de datos desde el teléfono ... Listo Rebooting to upload... Listo Searching Ramdump interface... COM6 detected Lectura de datos desde el teléfono ... Listo Calculando... Listo Buscando servidor... Listo Waiting for server answer... Listo Waiting ADB device... Listo Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Lectura de datos desde el teléfono ... Listo Reiniciando teléfono ... Listo Desbloqueo Listo Done with Samsung Tool PRO v.30.5 me funciono excelente Checking Login and Password... OK Ballance: 15 crd. You have 15 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G955U Android version: 8.0.0 PDA version: G955USQU3CRD4 CSC version: G955UOYN3CRD4 Phone version: G955USQU3CRD4 Product code: SM-G955UZVATMB CSC country code: USA CSC sales code: TMB Phone SN: R28J7418X4W IMEI: HW version: REV1.0 RF cal date: 2017.07.31 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2018-04-01 Boot Warranty bit: 0 Searching Samsung diag port... detected COM459 Reading phone info... OK Reading data from phone... error (0), skip Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM25 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.32.7 |
|
|
|
|
Jun 16 2018, 09:58 PM
Publicado:
#12
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 1 Agradecimientos: 0 Registrado: 7-December 16 Miembro No.: 902,833 Pais:
|
CITA(elmasterttt @ Dec 30 2017, 06:09 PM) solo es cuestion de tener los creditos y direct unlock, no tienes que rootear ni nada solo depuracion usb, aclaro este s8 plus era de t-mobile con su aplicacion device unlock y aun asi libero directamente.. aqui mi log de operacion UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Type *#0808# and select 'DM+ACM+ADB'. 3. Run dialer and type *#0*# (service mode will apear). 4. Connect the phone to USB cable, choose correct COM port in port settings. 5. Press 'Unlock' button. 6. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-G955U Selected port: COM11 SAMSUNG Mobile USB Serial Port Software version: 30.2.2 Checking Login and Password... OK Ballance: 10 crd. You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G955U Android version: 7.0 Product code: SM-G955UZKATMB Phone version: G955USQS2BQL1 PDA version: G955USQS2BQL1 CSC version: G955UOYN2BQL1 CSC country code: USA CSC sales code: TMB HW version: REV1.0 Phone SN: R28J40S74FZ Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-12-01 RF cal date: 2017.04.09 IMEI: ..-------- Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM24 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.2.2 segui todo al pie pero no me reconoce adb ya cheque drivers cargue combinacion y nada |
|
|
|
|
Jul 6 2018, 05:22 PM
Publicado:
#13
|
|
|
Colaborador del Clan Grupo: Miembros Mensajes: 395 Agradecimientos: 469 Registrado: 15-March 10 Miembro No.: 90,596 |
z3x full
s9.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 50.9k )
Número de descargas: 0 |
|
|
|
 Dec 12 2021, 02:39 AM
Publicado:
#14
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 4 Agradecimientos: 0 Registrado: 20-September 17 Miembro No.: 988,499 Pais: 
|
CITA(acma @ Jul 6 2018, 06:22 PM) z3x full
s9.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 50.9k )
Número de descargas: 0a mi no me sale la opcion DM+ACM+ADB... me salen DM+MODEM+ADB y otros..... |
|
|
|
|
|
|
Fecha y Hora actual: 21st April 2026 - 06:01 PM |
