Aporte J120az Unlock Binario 5 Opciones

[kikxt]

Es muy fácil pero no encontré nada, el aporte es simplemente para recordar viejos métodos y que no se quebren tanto la cabeza como yo, lo único que hay que hacer es flashear eng boot pc1 del j120a. Root con kingo Root y new unlock con z3x. Un apunte nada más, yo flashee el eng modem del binario 5 antes de este proceso intentando liberar por diag, pero no creo que sea necesario. Aqui el log:

Waiting ADB device... Listo
[ 3/21/2018 11:32:00 AM ] Leyendo información del teléfono ...
[ 3/21/2018 11:32:00 AM ] Modelo: SAMSUNG-SM-J120AZ
[ 3/21/2018 11:32:00 AM ] Android version: 6.0.1
[ 3/21/2018 11:32:00 AM ] Código del Producto: SM2J120AZKZAIO
[ 3/21/2018 11:32:00 AM ] Versión del telefono: J120AZTUS5ARA1
[ 3/21/2018 11:32:00 AM ] PDA version: J120AZTUS5ARA1
[ 3/21/2018 11:32:00 AM ] CSC version: J120AZAIO5ARA1
[ 3/21/2018 11:32:00 AM ] Código de país CSC: USA
[ 3/21/2018 11:32:00 AM ] Código de Venta CSC: AIO
[ 3/21/2018 11:32:00 AM ] HW version: REV0.3
[ 3/21/2018 11:32:00 AM ] Phone SN: R58J401DQ1A
[ 3/21/2018 11:32:00 AM ] Chip name: EXYNOS3475
[ 3/21/2018 11:32:00 AM ] Módem: SHANNON308
[ 3/21/2018 11:32:00 AM ] Security patch: 2018-01-01
[ 3/21/2018 11:32:00 AM ] RF cal date: 20170401
[ 3/21/2018 11:32:00 AM ] IMEI: 356903083826771
[ 3/21/2018 11:32:00 AM ] Verificando derecho de Super Usuario... verdadero
[ 3/21/2018 11:33:00 AM ] Reading NV data... Listo
[ 3/21/2018 11:33:00 AM ] Checking NV data... Listo
[ 3/21/2018 11:33:00 AM ] Reading data... Listo
[ 3/21/2018 11:33:00 AM ] Detecting MODEM... Listo
[ 3/21/2018 11:33:00 AM ] Reading MODEM... Listo
[ 3/21/2018 11:33:00 AM ] Calculando... Listo
[ 3/21/2018 11:33:00 AM ] Initialization data... Listo
[ 3/21/2018 11:33:00 AM ] Writing zTool... Listo
[ 3/21/2018 11:33:00 AM ] Initialization zTool... Listo
[ 3/21/2018 11:33:00 AM ] Running zTool, please wait...
[ 3/21/2018 11:33:00 AM ] Start... Listo
[ 3/21/2018 11:33:00 AM ] Initialization... Listo
[ 3/21/2018 11:33:00 AM ] Generate and check client proof... Listo
[ 3/21/2018 11:33:00 AM ] Verify proof by client... Listo
[ 3/21/2018 11:33:00 AM ] Reading data... Listo
[ 3/21/2018 11:34:00 AM ] HWID: 67 CF 2F CA 91 E6 4F BD 69 3C 30 E1 E5 82 F1 4C
[ 3/21/2018 11:34:00 AM ] Calculando... Listo
[ 3/21/2018 11:34:00 AM ] Desbloquear... Listo
[ 3/21/2018 11:34:00 AM ] Writing NV data... Listo
[ 3/21/2018 11:34:00 AM ] Reiniciando teléfono ... Listo
[ 3/21/2018 11:34:00 AM ] Desbloqueo Listo

[Anunciante Autorizado]

[rsandigo]

Es muy fácil pero no encontré nada, el aporte es simplemente para recordar viejos métodos y que no se quebren tanto la cabeza como yo, lo único que hay que hacer es flashear eng boot pc1 del j120a. Root con kingo Root y new unlock con z3x. Un apunte nada más, yo flashee el eng modem del binario 5 antes de este proceso intentando liberar por diag, pero no creo que sea necesario. Aqui el log:

Waiting ADB device... Listo
[ 3/21/2018 11:32:00 AM ] Leyendo información del teléfono ...
[ 3/21/2018 11:32:00 AM ] Modelo: SAMSUNG-SM-J120AZ
[ 3/21/2018 11:32:00 AM ] Android version: 6.0.1
[ 3/21/2018 11:32:00 AM ] Código del Producto: SM2J120AZKZAIO
[ 3/21/2018 11:32:00 AM ] Versión del telefono: J120AZTUS5ARA1
[ 3/21/2018 11:32:00 AM ] PDA version: J120AZTUS5ARA1
[ 3/21/2018 11:32:00 AM ] CSC version: J120AZAIO5ARA1
[ 3/21/2018 11:32:00 AM ] Código de país CSC: USA
[ 3/21/2018 11:32:00 AM ] Código de Venta CSC: AIO
[ 3/21/2018 11:32:00 AM ] HW version: REV0.3
[ 3/21/2018 11:32:00 AM ] Phone SN: R58J401DQ1A
[ 3/21/2018 11:32:00 AM ] Chip name: EXYNOS3475
[ 3/21/2018 11:32:00 AM ] Módem: SHANNON308
[ 3/21/2018 11:32:00 AM ] Security patch: 2018-01-01
[ 3/21/2018 11:32:00 AM ] RF cal date: 20170401
[ 3/21/2018 11:32:00 AM ] IMEI: 356903083826771
[ 3/21/2018 11:32:00 AM ] Verificando derecho de Super Usuario... verdadero
[ 3/21/2018 11:33:00 AM ] Reading NV data... Listo
[ 3/21/2018 11:33:00 AM ] Checking NV data... Listo
[ 3/21/2018 11:33:00 AM ] Reading data... Listo
[ 3/21/2018 11:33:00 AM ] Detecting MODEM... Listo
[ 3/21/2018 11:33:00 AM ] Reading MODEM... Listo
[ 3/21/2018 11:33:00 AM ] Calculando... Listo
[ 3/21/2018 11:33:00 AM ] Initialization data... Listo
[ 3/21/2018 11:33:00 AM ] Writing zTool... Listo
[ 3/21/2018 11:33:00 AM ] Initialization zTool... Listo
[ 3/21/2018 11:33:00 AM ] Running zTool, please wait...
[ 3/21/2018 11:33:00 AM ] Start... Listo
[ 3/21/2018 11:33:00 AM ] Initialization... Listo
[ 3/21/2018 11:33:00 AM ] Generate and check client proof... Listo
[ 3/21/2018 11:33:00 AM ] Verify proof by client... Listo
[ 3/21/2018 11:33:00 AM ] Reading data... Listo
[ 3/21/2018 11:34:00 AM ] HWID: 67 CF 2F CA 91 E6 4F BD 69 3C 30 E1 E5 82 F1 4C
[ 3/21/2018 11:34:00 AM ] Calculando... Listo
[ 3/21/2018 11:34:00 AM ] Desbloquear... Listo
[ 3/21/2018 11:34:00 AM ] Writing NV data... Listo
[ 3/21/2018 11:34:00 AM ] Reiniciando teléfono ... Listo
[ 3/21/2018 11:34:00 AM ] Desbloqueo Listo

Posteo ENG_BOOT_J120A_PC1.tar confirmo procedimiento.. Saludos

Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SAMSUNG-SM-J120AZ
Android version: 6.0.1
Código del Producto: SM2J120AZKZAIO
Versión del telefono: J120AZTUS5ARA1
PDA version: J120AZTUS5ARA1
CSC version: J120AZAIO5ARA1
Código de país CSC: USA
Código de Venta CSC: AIO
HW version: REV0.3
Phone SN: R58HC0MT4EK
Chip name: EXYNOS3475
Módem: SHANNON308
Security patch: 2018-01-01
RF cal date: 20161203
IMEI: 356419076252925
Verificando derecho de Super Usuario... verdadero
Reading NV data... Listo
Checking NV data... Listo
Reading data... Listo
Detecting MODEM... Listo
Reading MODEM... Listo
Calculando... Listo
Initialization data... Listo
Writing zTool... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Reading data... Listo
HWID: 4A 62 E6 44 D2 ED 8E 70 A4 EF E4 CF 1B 79 61 21
Calculando... Listo
Desbloquear... Listo
Writing NV data... Listo
Reiniciando teléfono ... Listo
Desbloqueo Listo

Done with Samsung Tool PRO v.31.0

Fichero(s) Adjunto(s)

 ENG_BOOT... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 7.64mb ) Número de descargas: 229

 

[Rubso]

no falla ese modem, PC1. yo baje el eng boot para B5 y nunca pude hacerlo jalar y con este modem si me quedo

saludos..

[nowlasco]

UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Read Codes DIAG
Selected model: SM-J120AZ
Software version: 33.5

Checking hash file... OK
Searching Samsung modem... detected COM51
Reading phone info...
Model: SM-J120AZ
AP version: J120AZTUS5ARA1
CSC version: J120AZAIO5ARA1
CP version: J120AUCU5ARA1
Product code: SM2J120AZKZAIO
Phone SN: R58H45479AD
IMEI: 356419072514294
Unique number: CFN00915ACE7143
Searching Samsung diag port... detected COM50
Reading phone info... OK
CP version: J120AUCU5ARA1
CP build: Jan 10 2018 16:21:16
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:16)
Freeze code: 31638263
NET lock: 60816913
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.33.5Unlock Samsung J120AZ

[eddduardos]

UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Read Codes DIAG
Selected model: SM-J120AZ
Software version: 33.5

Checking hash file... OK
Searching Samsung modem... detected COM51
Reading phone info...
Model: SM-J120AZ
AP version: J120AZTUS5ARA1
CSC version: J120AZAIO5ARA1
CP version: J120AUCU5ARA1
Product code: SM2J120AZKZAIO
Phone SN: R58H45479AD
IMEI: 356419072514294
Unique number: CFN00915ACE7143
Searching Samsung diag port... detected COM50
Reading phone info... OK
CP version: J120AUCU5ARA1
CP build: Jan 10 2018 16:21:16
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:16)
Freeze code: 31638263
NET lock: 60816913
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.33.5Unlock Samsung J120AZ

Amigo como lo hiciste?? estoy tratando de hacerlo y me da error, flashaste el eng boot?? o sin modificar nada te hizo el unlock??

[monsalin]

Amigo como lo hiciste?? estoy tratando de hacerlo y me da error, flashaste el eng boot?? o sin modificar nada te hizo el unlock??

despues de tanto batallar quedo le pase la combination de j120a biit 5 descargado de z3x despues le infrese el system unicamente de j120az le di leer codigo y listo.


Checking hash file... Listo
Searching Samsung modem... detectado COM827
Leyendo información del teléfono ...
Modelo: NONE
AP version: J120AZTUS5ARA1
CSC version: NONE
CP version: J120AUCU5ARA1
Phone SN: R58JA1YPFRY
IMEI: 35690
Número único: C8G0129DA527184
Incorrect model selected. This may damage your phone. Continue? Si
Searching Samsung diag port... detectado COM828
Leyendo información del teléfono ... Listo
CP version: J120AUCU5ARA1
CP build: Jan 10 2018 16:21:16
Lectura de datos desde el teléfono ... Listo
Reading NV data... Listo
Módem: SHANNON308
Checking NV data... Listo
Calculando... Listo
Por favor espere, calculando codigos... OK (time - 00:01:08)
Congelar código: 91508151
NET lock: 30573191
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
Para comprobar bloquea el estado: *#7465625#

Done with Samsung Tool PRO v.34.11

[youtashiro]

Yo acabo de hacer un modelo igual, j120az bin 5 firm RA1 , solo le flashee con odin el modem que adjunto, es el eng modem binario 5. Despues de eso active ADB, y con la marcacion *#0808# le puse en la opcion DM+ACM+ADB , seleccione el modelo correspondiente en z3x , conecte por USB, seleccione el puerto ADB y le di Read codes DIAG, en un instante me arrojo los codigos sin problema, y sin necesidad de root. Espero a alguien le sirva el dato.

 J120AZ_B... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 178.66k ) Número de descargas: 0

Fichero(s) Adjunto(s)

 ENG_MODE... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 31.19mb ) Número de descargas: 72

 

[ramiromax]

A mi me leyo todo el procedimiento y aunque decia que tenia la misma copilacion del modem no lo hacia, escribi el CP el ENG MODEM y listo inmediato me empezo a leer porque antes de hacer la liberacion me daba error de lectura de datos, y no me funciono con el codigo frezee sino con el codigo net lock aca mi LOG
: de que si funciona en binario 5 al terminar la operacion reinicia y colocar el codigo generado por z3x, no es necesario el root en tal caso de error lectura de datos actualizar al modem posteado


Operation: Read Codes
Selected model: SM-J120AZ
Software version: 36.8

Checking hash file... Listo
Searching Samsung modem... detectado COM3
Leyendo información del teléfono ...
Modelo: SM-J120AZ
AP version: J120AZTUS5ARA1
CSC version: J120AZAIO5ARA1
CP version: J120AUCU5ARA1
Código del Producto: SM2J120AZKZAIO
Phone SN: R58*****
IMEI: 3564190*******
Número único: C*******
Searching Samsung diag port... detectado COM4
Leyendo información del teléfono ... Listo
CP version: J120AUCU5ARA1
CP build: Jan 10 2018 16:21:16
Lectura de datos desde el teléfono ... Listo
Reading NV data... Listo
Módem: SHANNON308
Checking NV data... Listo
Calculando... Listo
Por favor espere, calculando codigos... OK (time - 00:00:15)
Congelar código: 4173****
NET lock: 0402****
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
Para comprobar bloquea el estado: *#7465625#

Done with Samsung Tool PRO v.36.8

Mensaje modificado por ramiromax el Jul 7 2019, 11:41 PM

[DarkStrato5973]

acabo de hacer uno, no cargue modem y esta en bit 5, con seguridad del 1 enero 2018, unicamente activando DM+ACM+ADB, aqui esta mi log...

Welcome to Octoplus Box Samsung software version 2.8.1.1
To connect SM-J120AZ phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM48
Selected model: SM-J120AZ
Operation: Read Codes - Diag port
Searching for a phone. Please wait...
Found phone on COM35
Reading info...
Detected phone model: SM-J120AZ
HW Version: SM2J120AZKZAIO
PDA version: J120AZTUS5ARA1
CSC version: J120AZAIO5ARA1
CP version: J120AUCU5ARA1
Phone SN: R58HC4E7JDR
Phone IMEI: 356419-XX-XXXXXX-X
Searching for USB diagnostic port...OK
Connecting...OK
Reading HWID...OK
Reading NV Data...OK
Reading phone unlock codes. This can take some time, please wait...
FREEZE unlock code: 49149208
NET LOCK unlock code: 35935803
SUB LOCK unlock code: 00000000
SP LOCK unlock code: 00000000
CP LOCK unlock code: 00000000
Performed by 2.8.1.1 Software version.