J327t1 Liberado Ok Opciones

[yarocubacel]

UNLOCK INSTRUCTIONS:
Warning! Knox warranty must be active (0x00)!

1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Type *#0808# and select 'DM + MODEM + ADB' (or 'DM + ACM + ADB').
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Press 'Unlock TMB via Server' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

Operation: Unlock
Selected model: SM-J327T1
Software version: 30.9

Checking Login and Password... OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-J327T1
Android version: 7.0
Product code: SM2J327TZKATMK
Phone version: J327T1UVU1AQK6
PDA version: J327T1UVU1AQK6
CSC version: J327T1TMK1AQK6
CSC country code: USA
CSC sales code: TMK
HW version: REV0.1
Phone SN: RV8JC03DETK
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-11-01
RF cal date: 20171206
IMEI: 352001097838769
Searching Samsung diag port... detected COM27
Reading phone info... OK
CP version: J327T1UVU1AQK6
CP build: Nov 20 2017 14:50:17
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.30.9