Alcatel Onte Touch Pixi 3 (4) 4003j Como Unlock ?, UNLOCK Y ROOT Opciones

[smargsm]

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A323541420237F3CED9C2D9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BA52J
[eMMC] : FLASH_CID : 150100464A323541420237F3CED9C2D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x28EC5DFA646EA6A6054404344BA4AE17
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


SIM Lock Status : Locked!
Unlocking now ...
Unlock done!

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!


log de actividad con pixi 3

[Anunciante Autorizado]

[romelcell]

reparación de imei exitoso
-------- 2016-07-02 09:50:43 ---------
SigmaKey 2.17.00 ADB: Restablecimiento de IMEI
* daemon not running. starting it now *
* daemon started successfully *
^ Android Composite ADB Interface
Versión: Linux version 3.4.67 (user@user-desktop) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Apr 7 17:00:26 CST 2015
Modelo del teléfono: TCL 4003J
Android 4.4.2; Firmware: KOT49H; Fecha: Fri May 1 01:34:24 CST 2015
Versión: KitKat
Flasheo de banda de base: 6180
Procesador Baseband: MT6572
Hardware IMEI: 014406002847336
Software IMEI: 014406002847336
Leyendo bloque de seguridad...OK
Zona de seguridad guardada en "C:\SigmaKey\security backup\_01440--------_TCL_4003J_KOT49H_Fri May 1 013424 CST 2015.skb"
Restablecimiento de IMEI: 01254--------72
Hecho
Reinicio del teléfono...Hecho

[robesos]

bueno aqui esta mi aporte , eso sale sin root el OT-4003A con SIGMA Box ,

estos son los pasos que segui,

1- intalar driver MTK
2- abren sigma en modulo MTK
3- aprietan volumen - y conetan el cable a la pc , y les generara un puerto COM
4- Direct unlock

y Listo son root y sin pasar trabajos ,

Aradecer no cuesta nada si de algo te sirvio este aporte

Fichero(s) Adjunto(s)

 2.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 134.18k ) Número de descargas: 0

 

[DjNoe V.]

con la nueva actualización de sigma v.2.19.00 ya es posible unlock sin root amigos, solo abrimos depurador conectamos sigma box en plataforma adb seleccionamos el puerto que nos genera y botón liberación directa y listo amigos

SigmaKey v.2.19.00
943527692 Sigma dongle 2.19, Initializing...OK
Pack 1: Activated
Pack 2: Activated
--------- 2016-09-23 12:01:23 ---------
SigmaKey 2.19.00 ADB: Liberación directa
* daemon not running. starting it now *
* daemon started successfully *
^ Alcatel Android ADB Interface
Versión: Linux version 3.4.67 (user@user-desktop) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sat Apr 25 12:03:37 CST 2015
Modelo del teléfono: TCL 4003A
Android 4.4.2; Firmware: KOT49H; Fecha: Wed Apr 29 09:52:21 CST 2015
Versión: KitKat
Flasheo de banda de base: 6180
Procesador Baseband: MT6572
Hardware IMEI: 014264000081576
Software IMEI: 014264000081576
Leyendo bloque de seguridad...OK
Zona de seguridad guardada en "C:\Users\GATEWAY\Documents\SigmaKey\security backup14264000081576_014264000081576_TCL_4003A_KOT49H_Wed Apr 29 095221 CST 2015.skb"
Liberando el teléfono...Hecho
Reinicio del teléfono...Hecho

[jesusmarin]

amigos este telefono se libera con crak nck mtk colocando el modelo alcatel 4018 a y le dan unlock y listo no requiere root listo a cobrar saludos

[jesusmarin]

amigos este telefono se libera con crak nck mtk colocando el modelo alcatel 4018 a y le dan unlock y listo no requiere root listo a cobrar saludos

[amaurisrrr]

Con NKC DONGLE sin root y en 0.04 sec!!!!!!!!!!!!!1
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.0
Selected phone: OT-4003A
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM112)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x463558354342
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004635583543 : 0000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM115)
Block Size: 512
MODEL FROM PROINFO: 4003A-2ATLMX1
SECRO FROM PROINFO: X5B0Q101AZ1A
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Reading security, wait...

IMEI[1] : 0142640XXXXXXXX
SIM[1]:
Block1(N): Locked (remain:10) Code : 2188564404432248
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

Amigo acabo de hacer el mismo proceso como lo mencionas y ahora el tlf no me enciende aqui el log de la operacion

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: OT-4003A
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : USB Port (COM21)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6735M_S00
Connect error[5054]: An error occurs might be the following reasons:
1. There does not exist the MTK_ROM_INFO structure in the ROM;
2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader;
3. It is not NFB-booting;

Boot Fail.!!!.
All done.

[jaimeantonio201]

sera posible liberar un cel sin las famosa cajas "box", con puro softawre o un generador de claves?
saludos y gracias

[juanjow]

Con NKC DONGLE sin root y en 0.04 sec!!!!!!!!!!!!!1
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.0
Selected phone: OT-4003A
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM112)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x463558354342
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004635583543 : 0000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM115)
Block Size: 512
MODEL FROM PROINFO: 4003A-2ATLMX1
SECRO FROM PROINFO: X5B0Q101AZ1A
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Reading security, wait...

IMEI[1] : 0142640XXXXXXXX
SIM[1]:
Block1(N): Locked (remain:10) Code : 2188564404432248
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

A MI ME DA QUE LIBERA CON LA NCK DONGLE BOX PERO NO LEVANTA SEÑAL EN LAS OTRAS OPERADORAS SOLO CON UNA LINEA LEVANTA