Aporte Frp G935p Galaxy S7edge Sprint Opciones

[leonardo89]

no encontre nada sobre esto y decidi postear este

z3x conectado a internet poner en download y darle reset FRP

nota: el error me lo dio al restablecer el kernel de fabrica porque se me desconecto el internet (pero ya no tenia frp)

Mensaje modificado por leonardo89 el Sep 5 2016, 02:19 PM

Fichero(s) Adjunto(s)

 SM_G935P... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 71.26k ) Número de descargas: 0

 

[Anunciante Autorizado]

[michoacanit0]

a mi me da error no detecta el adb asta que termina el conteo y dice time out entonces si reconose el adb

[=Angel-GSM=]

Este metodo es efectivo pata todos los S7 y modelos con version 6.0.1 101 % provado

solo tendras usar un telefono con Internet del mismo telefono no red de wifi

Fichero(s) Adjunto(s)

 FRP_101_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 125bytes ) Número de descargas: 119

 

[ConejiToO27]

[quote name='leonardo89' date='Sep 5 2016, 03:18 PM' post='1708557']
no encontre nada sobre esto y decidi postear este

z3x conectado a internet poner en download y darle reset FRP

nota: el error me lo dio al restablecer el kernel de fabrica porque se me desconecto el internet (pero ya no tenia frp)


Hola Amigo, en mi caso el telefono tenia la version 7.0 que es esta.: G935PVPU4BQAA procedi con octopus y le flasheaba el boot pero me lo dejaba boteando en el logo al igual que z3x , lo que procedi hacer fue rebajar a la version 6.0.1 (G935PVPS4APK1) y procedi con z3x y todo un exito. en el proceso te pregunta si quieres eliminar el kernel original seleccione opcion NO y todo un exito, lo unico que despues se reiniciaba despues de 1 minuto mas o menos, entonces procedi a flashear el firmaware otra vez.

Aqui Esta Mi Logo. Pueden Borrar Mi post Si hay otro igual.

3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock Domestic' button.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.

To reset Google account activation or Samsung reactivation lock:
1. Power on phone in download mode (turn off phone, press vol.down + home + power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Reset FRP/React/EE
Selected model: SM-G935P
Software version: 28.2

Checking local file... Listo
Buscando servidor... Listo
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM4 detected
Configurar conexión ... Listo
Lectura de datos desde el teléfono ... Listo
Sending data to phone... Listo
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-G935P
Android version: 6.0.1
Código del Producto: Not Active
Versión del telefono: G935PVPS4APK1
PDA version: G935PVPS4APK1
CSC version: G935PSPT4APK1
Código de país CSC: USA
Código de Venta CSC: SPR
HW version: REV0.7
Phone SN: 00000000000
Chip name: MSM8996
Módem: MSM8996
Security patch: 2016-11-01
RF cal date: 2016.11.15
IMEI:
Verificando derecho de Super Usuario... verdadero
Borrado FRP... Listo
Reiniciando teléfono ... Listo
Reset FRP done

Done with Samsung Tool PRO v.28.2

No Cuesta Nada Agradecer.

Dios Bendiga A Todos.

[JorgeRamos01]

no encontre nada sobre esto y decidi postear este

z3x conectado a internet poner en download y darle reset FRP

nota: el error me lo dio al restablecer el kernel de fabrica porque se me desconecto el internet (pero ya no tenia frp)

Hice lo mismo que explicaste y me dijo k no activo el ADB y ahora solo se reinicia

[ger_angel]

Hice lo mismo que explicaste y me dijo k no activo el ADB y ahora solo se reinicia

colega y pudiste darle solucion a problema que te salio al reinicio continuo

[alain2058]

colega y pudiste darle solucion a problema que te salio al reinicio continuo

solo pasa flash despues de esto y queda sin cuenta

[kymdolly]

en mi caso era uno de compilacion G935PVPU6BRD2 y con octopus le pude realizar frp fue muy rapido tambien primero me fui a descargas de octopus y descargue el root G935P_B4_QA6_QAA_7.0.oct lo flashe desde octopus y con eso habilita el adb luego sorpresa me pedia conectar a server en octopus pero me fije q en la misma pestaña de qualcom estaba el modelo g928p me dije sera que es de los mismos bueno ya tengo el software descargado por si se brickea probare y le di en reset frp reactivation elegi el adb combination segui el proceso y sorpresa salio perfecto solo me fui a ajustes y le di reset desde ajustes al iniciar de nuevo solo lo flashee para eliminar el root todo bien solo me falto probar el proceso de unlock pero el cel ya estaba liberado aca mi log

este es el primer log cuando cargue el root y intente frp desde el modelo exacto

INFO : 19/6/2018 09:30:53 > To connect SM-G935P phone you have to perform the following steps:
INFO : 19/6/2018 09:30:53 > 1. Disconnect USB cable from phone.
INFO : 19/6/2018 09:30:53 > 2. Go to Menu->Settings->More->About Device.
INFO : 19/6/2018 09:30:53 > 3.Tap on "Build number" 7 times to enable developer options.
INFO : 19/6/2018 09:30:53 > 4. Go to Menu->Settings->More->Developer options.
INFO : 19/6/2018 09:30:53 > 5. Turn on "USB Debugging" option.
INFO : 19/6/2018 09:45:30 > Selected firmware file: G935P_B4_QA6_QAA_7.0.oct
WARN : 19/6/2018 09:45:38 > Please put the phone into Download Mode and connect USB cable.
WARN : 19/6/2018 09:45:39 > To put SM-G935P into Download Mode, You have to perform the following steps:
WARN : 19/6/2018 09:45:39 > 1. Reconnect the battery.
WARN : 19/6/2018 09:45:39 > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 19/6/2018 09:45:39 > 3. When phone turns on, press "Volume+" key.
INFO : 19/6/2018 09:45:39 > Found phone on
WARN : 19/6/2018 09:45:39 > Advanced mode!
INFO : 19/6/2018 09:45:41 > Firmware write started.
INFO : 19/6/2018 09:45:42 > Writing BOOT section...
INFO : 19/6/2018 09:45:43 > BOOT section has been written successfully.
INFO : 19/6/2018 09:45:45 > Firmware writing successfully completed.
INFO : 19/6/2018 09:45:45 > Performed by 2.6.9 Software version.
INFO : 19/6/2018 09:46:30 > -----------------------------------------------------------------------------------
INFO : 19/6/2018 09:46:31 > Platform: Samsung Android
INFO : 19/6/2018 09:46:31 > Selected port: COM45
INFO : 19/6/2018 09:46:32 > Selected model: SM-G935P
INFO : 19/6/2018 09:46:32 > Operation: Read info
INFO : 19/6/2018 09:46:32 > Reading info, please wait...
INFO : 19/6/2018 09:46:32 > Detected phone model: SM-G935P
INFO : 19/6/2018 09:46:32 > Firmware compiled date: Tue Apr 17 21:21:59 KST 2018
INFO : 19/6/2018 09:46:32 > PDA version: G935PVPU6BRD2
INFO : 19/6/2018 09:46:33 > CSC version: G935PSPT6BRD2
INFO : 19/6/2018 09:46:33 > SW version: G935PVPU6BRD2
INFO : 19/6/2018 09:46:33 > Phone SN: 00000000000
INFO : 19/6/2018 09:46:33 > Android version: 7.0 (NRD90M)
INFO : 19/6/2018 09:46:34 > Sales code: SPR
INFO : 19/6/2018 09:46:34 > Country: USA
INFO : 19/6/2018 09:46:34 > HW platform: msm8996
INFO : 19/6/2018 09:46:34 > HW Chip: MSM8996
INFO : 19/6/2018 09:46:34 > HW Modem: MSM8996
INFO : 19/6/2018 09:46:34 > Security patch level: 2018-03-01
INFO : 19/6/2018 09:46:34 > SIM 1 status: ready
INFO : 19/6/2018 09:46:34 > Codename: hero2qltespr
INFO : 19/6/2018 09:46:41 > Connecting to server..
INFO : 19/6/2018 09:46:45 > Username:
INFO : 19/6/2018 09:46:45 > Authorization..
INFO : 19/6/2018 09:46:45 > Performed by 2.6.9 Software version.
ERROR : 19/6/2018 09:46:47 > Login error: Wrong username!
INFO : 19/6/2018 09:46:47 > Performed by 2.6.9 Software version.
INFO : 19/6/2018 09:46:48 > Selected interface: USB
INFO : 19/6/2018 09:46:48 > Searching for device. Please wait...
INFO : 19/6/2018 09:46:48 > Waiting for device...
ERROR : 19/6/2018 09:47:55 > Device was not found!
ERROR : 19/6/2018 09:47:55 > Could not read info
INFO : 19/6/2018 09:47:55 > Performed by 2.6.9 Software version.
INFO : 19/6/2018 09:49:17 > Selected interface: USB
INFO : 19/6/2018 09:49:17 > Searching for device. Please wait...
INFO : 19/6/2018 09:49:17 > Waiting for device...
INFO : 19/6/2018 09:49:21 > Found device on COM45
INFO : 19/6/2018 09:49:21 > Reading info...
INFO : 19/6/2018 09:49:35 > Detected device model: SM-G935P
INFO : 19/6/2018 09:49:35 > HW Version: SPR
INFO : 19/6/2018 09:49:35 > PDA version: G935PVPU6BRD2
INFO : 19/6/2018 09:49:35 > CSC version: G935PSPT6BRD2
INFO : 19/6/2018 09:49:35 > CP version: G935PVPU6BRD2
INFO : 19/6/2018 09:49:35 > Device SN: 00000000000
INFO : 19/6/2018 09:49:35 > Device IMEI: 3570
INFO : 19/6/2018 09:49:35 > FRP/Reactivation: UNKNOWN
INFO : 19/6/2018 09:49:35 > Connecting to server..
INFO : 19/6/2018 09:49:41 > Performed by 2.6.9 Software version.
ERROR : 19/6/2018 09:51:08 > MyExceptionEAccessViolationAccess violation at address 733175DA in module 'RICHED20.DLL'. Read of address 1A24EF40
ERROR : 19/6/2018 09:51:08 > TsRichEdit
ERROR : 19/6/2018 09:51:08 > MyExceptionEAccessViolationAccess violation at address 733175E1 in module 'RICHED20.DLL'. Read of address 0001B101
ERROR : 19/6/2018 09:51:08 > TsRichEdit
ERROR : 19/6/2018 09:51:08 > MyExceptionEAccessViolationAccess violation at address 733175E1 in module 'RICHED20.DLL'. Read of address D88BCF8B
ERROR : 19/6/2018 09:51:08 > TsRichEdit
ERROR : 19/6/2018 09:52:41 > MyExceptionEAccessViolationAccess violation at address 733175E1 in module 'RICHED20.DLL'. Read of address 78746341
ERROR : 19/6/2018 09:52:41 > TsRichEdit
ERROR : 19/6/2018 09:52:41 > MyExceptionEAccessViolationAccess violation at address 733175E1 in module 'RICHED20.DLL'. Read of address 00017401
ERROR : 19/6/2018 09:52:41 > TsRichEdit
ERROR : 19/6/2018 09:52:41 > MyExceptionEAccessViolationAccess violation at address 733175E1 in module 'RICHED20.DLL'. Read of address 00017401
ERROR : 19/6/2018 09:52:41 > TsRichEdit
ERROR : 19/6/2018 09:52:41 > MyExceptionEAccessViolationAccess violation at address 733175DF in module 'RICHED20.DLL'. Read of address 00001E28
ERROR : 19/6/2018 09:52:41 > TFactoryServicesForm
ERROR : 19/6/2018 09:52:45 > MyExceptionEAccessViolationAccess violation

ahora este es cuando le realize el frp desde el modelo g928p

Log file "C:\Program Files (x86)\Octoplus\Octoplus_Samsung\LOG\19-06-2018_10-12-54.log" created (19/6/2018 10:12:57).
INFO : 19/6/2018 10:13:20 > Set up system language English (file: English.ini)
INFO : 19/6/2018 10:13:20 > Welcome to Octoplus Box Samsung software version 2.6.9
INFO : 19/6/2018 10:13:32 > -----------------------------------------------------------------------------------
INFO : 19/6/2018 10:13:32 > To connect SM-G930T phone you have to perform the following steps:
INFO : 19/6/2018 10:13:32 > 1. Disconnect USB cable from phone.
INFO : 19/6/2018 10:13:32 > 2. Go to Menu->Settings->More->About Device.
INFO : 19/6/2018 10:13:32 > 3.Tap on "Build number" 7 times to enable developer options.
INFO : 19/6/2018 10:13:32 > 4. Go to Menu->Settings->More->Developer options.
INFO : 19/6/2018 10:13:32 > 5. Turn on "USB Debugging" option.
INFO : 19/6/2018 10:13:58 > -----------------------------------------------------------------------------------
INFO : 19/6/2018 10:13:58 > To connect SM-G935P phone you have to perform the following steps:
INFO : 19/6/2018 10:13:58 > 1. Disconnect USB cable from phone.
INFO : 19/6/2018 10:13:58 > 2. Go to Menu->Settings->More->About Device.
INFO : 19/6/2018 10:13:58 > 3.Tap on "Build number" 7 times to enable developer options.
INFO : 19/6/2018 10:13:58 > 4. Go to Menu->Settings->More->Developer options.
INFO : 19/6/2018 10:13:58 > 5. Turn on "USB Debugging" option.
INFO : 19/6/2018 10:14:13 > -----------------------------------------------------------------------------------
INFO : 19/6/2018 10:14:14 > Platform: Samsung Android
INFO : 19/6/2018 10:14:15 > Selected port: COM1
INFO : 19/6/2018 10:14:15 > Selected model: SM-G928P
INFO : 19/6/2018 10:14:15 > Operation: Reset FRP - ADB
INFO : 19/6/2018 10:14:19 > Searching for a phone (waiting for ADB device)...
INFO : 19/6/2018 10:14:19 > Reading info...
INFO : 19/6/2018 10:14:21 > Detected phone model: SM-G935P
INFO : 19/6/2018 10:14:21 > Firmware compiled date: Tue Apr 17 21:21:59 KST 2018
INFO : 19/6/2018 10:14:21 > PDA version: G935PVPU6BRD2
INFO : 19/6/2018 10:14:21 > CSC version: G935PSPT6BRD2
INFO : 19/6/2018 10:14:21 > SW version: G935PVPU6BRD2
INFO : 19/6/2018 10:14:22 > Phone SN: 00000000000
INFO : 19/6/2018 10:14:22 > Android version: 7.0 (NRD90M)
INFO : 19/6/2018 10:14:22 > Sales code: SPR
INFO : 19/6/2018 10:14:23 > Country: USA
INFO : 19/6/2018 10:14:24 > HW platform: msm8996
INFO : 19/6/2018 10:14:24 > HW Chip: MSM8996
INFO : 19/6/2018 10:14:26 > HW Modem: MSM8996
INFO : 19/6/2018 10:14:29 > Security patch level: 2018-03-01
INFO : 19/6/2018 10:14:29 > SIM 1 status: ready
INFO : 19/6/2018 10:14:29 > Codename: hero2qltespr
INFO : 19/6/2018 10:14:29 > Resetting FRP lock..
WARN : 19/6/2018 10:15:25 > FRP lock is successfully reseted!
BINF : 19/6/2018 10:15:25 > Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
INFO : 19/6/2018 10:15:25 > Performed by 2.6.9 Software version.
INFO : 19/6/2018 10:32:42 > -----------------------------------------------------------------------------------

[gatonegro850619]

me llego uno con compilacion G935PVPS5BRA1. ejecute los siguientes pasos:

1. descargar desde el soporte de la octopus box el archivo G935P_B4_QA6_QAA_7.0.oct.
2. poner el movil en modo descarga y flashearle dicho archivo con la octopus box.
3. seleccionar el modelo sm-g928p darle a la opcion Reset FRP/Reactivation.

aqui adjunto el log:

Bienvenido en Octoplus Box Samsung software versión 2.7.4
-----------------------------------------------------------------------------------
To connect SM-G935P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM55
Modelo seleccionado: SM-G928P
Operation: Reset FRP - ADB
Searching for a phone (waiting for ADB device)...
Reading info...
Modelo del teléfono detectado: SM-G935P
Fecha de creación del firmware: Mon Jan 8 12:22:14 KST 2018
PDA version: G935PVPS5BRA1
CSC version: G935PSPT5BRA1
Versión del SW: G935PVPS5BRA1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: SPR
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-01-01
Warranty Void: 0
SIM 1 status: ready
Codename: hero2qltespr
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data
reset"
Performed by 2.7.4.3 Software version.

los agradecimientos son para el colega kymdolly. solo intento exponer de una forma mas simple como me resulto.