Reset Frp Eko Omega Q50 Done Nck Box Opciones

[alfonzo2710]

lo primero que hay que conocer es el tipo de procesador mtk en este caso es MT6580_S00

hice antes de iniciar el proceso realize un backup de seguridad por si acaso aqui el log:

Exe version: NCKBox AndroidMTK 1.8.7.2
Selected phone: MT6580
Action: Backup Security Items
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM12)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 29:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM11)
Build ID: MRA58K
Display ID: MRA58K dev-keys
Version: 6.0
Build Date: 2016年 07月 08日 星期五 13:25:59 CST
Build Date: 1467955559
Model: EKO Omega Q50
Brand: alps
Device: Android
Manufacturer: alps
Mediatek Version Release: alps-mp-m0.mp1-V2.34_b6580.weg.a.m
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Dumping security....
IMEI[1]: 3598xxxx75
IMEI[2]: 3598xxxx472
Dumping Preloader.
Dumping proinfo.
Reading: BEGIN: 0x80000 - LEN: 0x200
Dumping NVRAM.
IMEI[1] from NVRAM: 3598xxxx75
IMEI[2] from NVRAM: 3598xxxx72
Dumping protect1
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Dumping protect2
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Dumping SECCFG.
Reading: BEGIN: 0x1c80000 - LEN: 0x40000
Dumping frp.
Reading: BEGIN: 0x4fa0000 - LEN: 0x200
Dumping nvdata.
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Dumping SEC_RO.
Saved to : C:\Users\METALLICA\Documents\Android_MTK\security_backup\MT6580_S00_EMMC_MRA58K__6.0_EKO Omega Q50_alps_3598xxxx75_3598xxxx72_11_26_2016_11_41_14
Wait untill phone will start charging.

luego seleccionar el tipo de procesador 0-By CPU_MT6580 e ir a la pestaña de service y click en reset FRP

Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM12)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 29:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM11)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.

y a cobrarr

si te fue de ayuda mi aporte no dudes en agradecer

[size="4"][/size]

[Anunciante Autorizado]

[Bals]

Comprobado al 100%


Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Phone not detected, aborting!!!!
Get port fail.
Please reconnect phone again and retry!
Battery must be charged.
Drivers must be installed.
Boot Fail.!!!.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM13)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6580_S00
Connect error[4001]: S_FT_DA_NO_RESPONSE
Boot Fail.!!!.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM13)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6580_S00
Connect error[4001]: S_FT_DA_NO_RESPONSE
Boot Fail.!!!.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM13)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6580_S00
Connect error[4001]: S_FT_DA_NO_RESPONSE
Boot Fail.!!!.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM13)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 29:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM30)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.


si no les funciona conectelo primero al aparecerles la franja roja es de meterne la bateria para que jale vean mi log no lo jalo a la primera por eso.