Problema Repair Imei D820 |
 |
|
Bienvenido, invitado ( Identificarse | Registrarse )
  |
Problema Repair Imei D820 |
 Sep 24 2014, 06:31 PM
Publicado:
#1
|
|
|
Miembro del Clan  Grupo: Miembros Mensajes: 217 Agradecimientos: 644 Registrado: 4-July 12 Desde: USA Miembro No.: 359,045 Pais: 
 |
que tal amigos tengo un lg d820 el cual trae el imei en 0 y lo he estado tratando de repararlo ya le desbloquee el bootloader y ya esta rooteado pero octopus no completa el proceso solo reinicia el telefono haciendole wipe y nuevamente comienza y assi se la pasa para nunca terminar alguien que me pueda ayudar? este es el log de operaciones de la box
por cierto el imei aparece correcto solo que yo le puse X para no dar a conocer el numero de mi equipo gracias a todos Welcome to Octoplus/Octopus Box LG Software version 1.6.8 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM3 Selected model: D820 Reading info...Failed! Port busyFailed! Could not detect mode! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM6 Selected model: D820 Reading info... Initializing ADB...OK ADB Server was found. Trying to kill... Waiting for phone...OK Model ID: Nexus 5 Firmware version: Kernel version: 3.4.0-gd59db4e Android version: 4.4.4 Hardware: ARMv7 After perform Repair IMEI operation, 3G/4G network will be unavailable! Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Select "Yes" on phone screen and press "Power" button. Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Bootloader is unlocked. Writing Bootloader...OK Please, wait while the phone will turn on and press "Ok" button. Trying to enable Diagnostics ports... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Diagnostics ports are enbled! Switching to Serial Port... Found model AAAAANAZ*ÿh°G at port COM33 Reading info...OK Mode: Normal Model ID: AAAAANAZ*ÿh°G Firmware compiled date: Mar 12 2014 Firmware compiled time: 20:00:00 Firmware released date: Jun 4 2014 Firmware released time: 17:04:20 SW Version: M8974A-2.0.50.1.16 Fixing IMEI... New IMEI: xxxxxxxxxxxxxxx Reading NVM...OK Backup saved to "D820_Bad_24-09-2014_18-09-54.NVM" Reading EFS...OK Backup saved to "D820_Bad_24-09-2014_18-14-06.EFS" Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D820_Bad_24-09-2014_18-14-50.SEC" Writing security area...OK Switching to Normal mode... Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Select "Yes" on phone screen and press "Power" button. Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Failed! |
 |
 
|
A continuacion 1 usuario(s) le Agradece(n) a ripperzone por su Colaboracion: RobinsonCow | |
| Anunciante Autorizado |
Sep 24 2014, 06:31 PM
Publicado:
#
|
 Estas ofertas pudieran interesarte. |
|
|
|
|
 Sep 24 2014, 08:20 PM
Publicado:
#2
|
|
 Colaborador del Clan Grupo: Miembros Mensajes: 308 Agradecimientos: 901 Registrado: 18-April 09 Desde: España, Santander Miembro No.: 32,751 Pais: 
|
Amigo pasale una flash del soporte y vuelve a root, y cuando estes reparando el imei, tienes que estar pendiente de aceptar los permisos en la pantalla del tel.
|
|
|
|
A continuacion 1 usuario(s) le Agradece(n) a moqued por su Colaboracion: suqami | |
|
Sep 24 2014, 10:03 PM
Publicado:
#3
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 217 Agradecimientos: 644 Registrado: 4-July 12 Desde: USA Miembro No.: 359,045 Pais:
|
Gracias amigo pero no hay firmwares para ese modelo en el soporte asi que tendre que buscar otra solucion por que si es muy raro este proceso del equipo
|
|
|
|
|
Oct 17 2014, 05:57 PM
Publicado:
#4
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 28 Agradecimientos: 8 Registrado: 29-August 12 Miembro No.: 378,899 |
CITA(ripperzone @ Sep 24 2014, 06:31 PM)  que tal amigos tengo un lg d820 el cual trae el imei en 0 y lo he estado tratando de repararlo ya le desbloquee el bootloader y ya esta rooteado pero octopus no completa el proceso solo reinicia el telefono haciendole wipe y nuevamente comienza y assi se la pasa para nunca terminar alguien que me pueda ayudar? este es el log de operaciones de la box por cierto el imei aparece correcto solo que yo le puse X para no dar a conocer el numero de mi equipo gracias a todos Welcome to Octoplus/Octopus Box LG Software version 1.6.8 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM3 Selected model: D820 Reading info...Failed! Port busyFailed! Could not detect mode! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM6 Selected model: D820 Reading info... Initializing ADB...OK ADB Server was found. Trying to kill... Waiting for phone...OK Model ID: Nexus 5 Firmware version: Kernel version: 3.4.0-gd59db4e Android version: 4.4.4 Hardware: ARMv7 After perform Repair IMEI operation, 3G/4G network will be unavailable! Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Select "Yes" on phone screen and press "Power" button. Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Bootloader is unlocked. Writing Bootloader...OK Please, wait while the phone will turn on and press "Ok" button. Trying to enable Diagnostics ports... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Diagnostics ports are enbled! Switching to Serial Port... Found model AAAAANAZ*ÿh°G at port COM33 Reading info...OK Mode: Normal Model ID: AAAAANAZ*ÿh°G Firmware compiled date: Mar 12 2014 Firmware compiled time: 20:00:00 Firmware released date: Jun 4 2014 Firmware released time: 17:04:20 SW Version: M8974A-2.0.50.1.16 Fixing IMEI... New IMEI: xxxxxxxxxxxxxxx Reading NVM...OK Backup saved to "D820_Bad_24-09-2014_18-09-54.NVM" Reading EFS...OK Backup saved to "D820_Bad_24-09-2014_18-14-06.EFS" Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D820_Bad_24-09-2014_18-14-50.SEC" Writing security area...OK Switching to Normal mode... Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Select "Yes" on phone screen and press "Power" button. Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Failed! amigo a mi no me reconoce el phone a l a caja, ya instale drivers necesarios que vienen el el manual y nada, ya active debbug y nada sabes si hay algo mas? |
|
|
|
A continuacion 1 usuario(s) le Agradece(n) a kanano96 por su Colaboracion: haroldpineda | |
|
Mar 14 2016, 05:47 PM
Publicado:
#5
|
|
 Miembro del Clan Grupo: Expulsados Mensajes: 66 Agradecimientos: 171 Registrado: 11-July 12 Desde: Bolivia Miembro No.: 361,785 Pais: 
|
CITA(ripperzone @ Sep 24 2014, 07:31 PM) que tal amigos tengo un lg d820 el cual trae el imei en 0 y lo he estado tratando de repararlo ya le desbloquee el bootloader y ya esta rooteado pero octopus no completa el proceso solo reinicia el telefono haciendole wipe y nuevamente comienza y assi se la pasa para nunca terminar alguien que me pueda ayudar? este es el log de operaciones de la box por cierto el imei aparece correcto solo que yo le puse X para no dar a conocer el numero de mi equipo gracias a todos Welcome to Octoplus/Octopus Box LG Software version 1.6.8 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM3 Selected model: D820 Reading info...Failed! Port busyFailed! Could not detect mode! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM6 Selected model: D820 Reading info... Initializing ADB...OK ADB Server was found. Trying to kill... Waiting for phone...OK Model ID: Nexus 5 Firmware version: Kernel version: 3.4.0-gd59db4e Android version: 4.4.4 Hardware: ARMv7 After perform Repair IMEI operation, 3G/4G network will be unavailable! Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Select "Yes" on phone screen and press "Power" button. Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Bootloader is unlocked. Writing Bootloader...OK Please, wait while the phone will turn on and press "Ok" button. Trying to enable Diagnostics ports... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Diagnostics ports are enbled! Switching to Serial Port... Found model AAAAANAZ*ÿh°G at port COM33 Reading info...OK Mode: Normal Model ID: AAAAANAZ*ÿh°G Firmware compiled date: Mar 12 2014 Firmware compiled time: 20:00:00 Firmware released date: Jun 4 2014 Firmware released time: 17:04:20 SW Version: M8974A-2.0.50.1.16 Fixing IMEI... New IMEI: xxxxxxxxxxxxxxx Reading NVM...OK Backup saved to "D820_Bad_24-09-2014_18-09-54.NVM" Reading EFS...OK Backup saved to "D820_Bad_24-09-2014_18-14-06.EFS" Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D820_Bad_24-09-2014_18-14-50.SEC" Writing security area...OK Switching to Normal mode... Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Initializing ADB...OK Waiting for phone...OK Switching to Fastboot mode...OK Unlocking Bootloader... Select "Yes" on phone screen and press "Power" button. Please perform the following steps: 1. Wait while the phone will turn on 2. Reboot the phone 3. Enable "USB debugging" Mode 4. Connect the cable and check, whether ADB interface has appeared in PC Device Manager 5. Press "Ok" button. Failed! Yo lo bajé de LP a KK v4.4.4 y recien ahí funcionó a la perfección. Demora un poco, el procedimiento es muy guiado, pero algo largo. En fín, Pude reparar el IMEI. Saludos. |
|
|
|
|
May 3 2016, 03:12 PM
Publicado:
#6
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 39 Agradecimientos: 56 Registrado: 10-July 12 Desde: Ecuador Miembro No.: 361,028 |
CITA(RobinsonCow @ Mar 14 2016, 05:47 PM) Yo lo bajé de LP a KK v4.4.4 y recien ahí funcionó a la perfección. Demora un poco, el procedimiento es muy guiado, pero algo largo. En fín, Pude reparar el IMEI. Saludos. amigo si te levanta 3g y 4g, tengo uno pero no levanta, me puedes ayudar con el qcn que tu tienes o el security backup o nvm, cualquiera de los tres |
|
|
|
|
|
|
Fecha y Hora actual: 2nd March 2026 - 03:07 PM |
