Phoenix Service Software Crackeado, Para flashear x USB los nuevos nokia X3, X6, etc.. Opciones

[AZAZAZAZ99]

ya tenes el rm descargado, sino utiliza el navi firm

si, estos son los que prove : rm-540: 0587191- (8.54) 011, 0591772- (8.54) 006, 0591955-(8.54) 007, y unos 012,016 estos son los que vaje del (navifimplus)
alguna idea cual sera la vercion que deveria buscar ???

[Anunciante Autorizado]

[sudxxi]

alguien que me ayude quiro flashear un nokia 5130 y el phoenix no me deja
se qda en
update server loaded

[tinchodecipo]

me sale este error alquien me puede decir por que ???

me sumo tengo el mismo problema.

Hola! Podes actualizar el link pq este que pusiste esta caido! Gracias

http://www.4shared.com/get/NMNSo8Z6/Phoeni...ware_20102.html

[jsam3000]

Señores que usan ahora para descargar FW de nokia porque NAVIFIRM creo que esta ya cerrado por completo

[nelsonayal]

Ola amigos kisiera que me den un tuto expecifico de como flashear un nokia C2-02 RM 693
por que prende y se keda la pantalla en blanco y hasta hoy en la mañana estab bien solo le saque el chip y lo prendi y kedo asi help....!!!!

te conviene usar el crack de INFINITY BEST 1.51 para flashear los nuevos nokia.. el phoenix esta un poco obsoleto en muchos nokia como los asha y otros nokia infineon..

y descarga los flashes en MRCRAB.net

[JORGEGSM583]

Disculpen pero los link estan caidos, alguien tendra el link corregido del Phoenix.

Saludos.

el que esta posteado en el siguiente link por el señor moderador Dr. Octopus en el publicado #13 esta funcional, favor usar el buscador, saludos...

http://www.clangsm.com/forum/index.php?showtopic=246054

Mensaje modificado por JORGEGSM583 el Apr 24 2014, 02:26 PM

[renato_]

Dale a continuar nomás, a mi siempre me sale ese cartel y le doy al botón y me funciona correctamente el phoenix

me puede ayudar con el instalador de phoenix xq lo link estan caidos

[pablo76]

Colega, lamentablemente no tiene los privilegios necesarios para poder descargar, no se pueden solicitar ni dar link externos, solo le puedo aconsejar que colabore con aportes al clan para ganarse el privilegio saludos!!

http://www.clangsm.com/forum/index.php?sho...t&p=1403984

[d14m0nd_bc]

links caidos bro, el 30/11/2015

[gor1110]

Amigos alguien sabe q programa se puede usar para descargar los firmware de Nokias?. ya el Navifirm no funciona....

[SDPedroza]

Phoenix Service Software v2012.24.000.48366

Para usarlo en sistemas recientes, deben configurarlo en modo de compatibilidad en Windows 7 y siempre ejecutarlo como Administrador
PD.: No tengo ningun movil para probarlo

CODE

Main component versions in the release:

• Product API 2012.22.2
• Nokia Connectivity Cable USB Driver Version 7.1.78.0
• Flash Update Package 2012.11
• FUSE Connection Manager v 2012.22
• Envira CL 2012.16

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.16.4.48159

Error Corrections & changes:
New product: RM-884

Please note:

Energy Management Calibration should not be performed for products using the "Quantum" engine (RM-689, RM-702, RM-704 and other product using the same engine)

EM calibration improved

Multiflashing problem (Genius case 186053) solved

RM-653 settings added

In case of problems with flashing update Programming Device (Flashing->Prommer Maintenance->Update)

Microsoft DOT.NET version 2 Service Pack 2 is now the minimum requirement. Phoenix installation will check PC for the DOT.NET version and update it automatically when PC has online connection. Without online connection, old DOT.NET versions must be updated manually.
New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages

Please see articles SR1774 for more information on the use of Nokia Data Package manager - tool, and article SR1854 for more information on the Nokia Service Application Manager Tool.
During installation, Data Packages should be installed in these directories, if they install to any other location by default. target folder for local data packages can be changed in the installation wizard manually
This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages
Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.
For more information concerning new options in "Firmware Update" - menu and their use, Please see documents SR1313 and SR1659 in KICS Information Center.
Tucson operations combined with "flash" - option are now handled in the same way as "refurbishment", which requires Mass Memory Content File to be available.
Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is recommended to flash phone separately with Firmware Update. Please refer to product specific instructions.
Connection media to FLS-5 must be configured to be "USB_FBUS", after FLS-4 support has been removed FBUS does not work anymore with FLS-5

KNOWN ERRORS & LIMITATIONS

• N9- RM-696 Product Code change still unreliable
• FLS-5 drivers do not support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be serviced in 64 bit operating systems
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 can be used with other product specific cables and adapters, but not with SS-46 Interface Adapter.
• If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini - file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” - UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version 11 has been released to correct this. Sales pack code is 0089J83 , old HW version is not delivered anymore
• Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
• When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
• When using Data Package download functions with online connection, download times may occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online servers is occasionally is known to be slow, depending on how data is buffered on caching servers.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
• It is not possible to program Mass Media Content file to some devices over direct USB cable connection, due to the large size of the file. For these models a feature called “Media Check” has been implemented. When this type of product is connected to service software / PC via direct USB cable the refurbishment option will be disabled. Please use a flash prommer. Affected products using Media Check are: RM-122, RM-175, RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462, RM-472, RM-484, RM-505, RM-555, RM-559
• To be able to use the help files in Windows 7 you need to install Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
- Start Phoenix with online connection to Internet, select "Help" and "Phoenix help". Click the "Microsoft Help and Support" website link. Download WinHlp32 and install it.- Go to <http://www.microsoft.com>. Type "WinHlp32" to "Search Microsoft.com" - field. Locate Windows Help program (WinHlp32.exe) for Windows 7 and install it
• When using flash prommers, only one connection type to one prommer is allowed. Please use either NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer

Supported operating systems and user rights

• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.
• Windows 7 32 Bit version
• Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)

Nokia Suite v3.8.48
PD.: No tengo ningun movil para probarlo

CODE

removed
Nokia Store (was broken for paid apps anyway)
Nokia Music Store (now MixRadio; was broken for downloads anyway)

new
Upload to OneDrive (formerly Microsoft SkyDrive)
Software Update (Nokia Account not required anymore)
Software Reinstall

not fixed
Nokia 206, Nokia 207, Nokia 208, Nokia 210, Nokia 301, and Nokia 515 still require an still require an older Suite version.

Fichero(s) Adjunto(s)

 PSS_2012... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 107.98mb ) Número de descargas: 0
 Nokia_Su... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 101.36mb ) Número de descargas: 0
 Captura_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 301.09k ) Número de descargas: 0
 Captura_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 324.68k ) Número de descargas: 0