Aporte Flashear P920h No Inicia, cable usb Opciones

[berenice]

Welcome to Octoplus/Octopus Box LG Software version 1.3.8
Connecting to server octopus-server0.no-ip.biz:82...OK
Authorizing...OK
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: Modem
Selected model: P920h
Initializing device...OK
Please, power phone ON, connect P990 cable (with 56k resistor), type
3845#*920#, go to "Port Setting", select "CP Image download" and click
"OK"...OK
Sending preloader...Failed!
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: Modem
Selected model: P920h
Initializing device...OK
Please, power phone ON, connect P990 cable (with 56k resistor), type
3845#*920#, go to "Port Setting", select "CP Image download" and click
"OK"...OK
Sending preloader...OK
Sending loader...OK
Reading info...OK
IMEI: xxxxxxxxxxxxxxx
Bluetooth address: F0:1C:13:8A:BF:E4
Wi-Fi MAC address: F0:1C:13:0E:5B:C4
Locks: Network Lock
MCC=334 (Mexico)
MNC=020
Disconnected.
Please, reboot the phone manually.
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: OMAP
Selected model: P920h
Opening "LGP920hAT-00-V10b-724-XXX-AUG-23-2011+0_AP.oct"...OK
Please, disconnect battery and connect P999 cable (with 910k
resistor).Canceled!
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: OMAP
Selected model: P920h
Opening "LGP920hAT-00-V10b-724-XXX-AUG-23-2011+0_AP.oct"...OK
Please, disconnect battery and connect P999 cable (with 910k resistor).
Initializing device...OK
Writing Firmware...
Connecting to modem CPU...OK
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Writing psi.fls...OK
Writing slb.fls...OK
Writing AENEAS_FW.fls...OK
Writing L6260_SIC.fls...OK
Connecting to application CPU...OK
Writing nv1...OK
Writing kernel...OK
Writing recovery...OK
Writing system...OK
Writing firmware done!
Disconnected.
Please, reboot the phone manually.







Este telefono se flashea con el cable usb ,solo basta con descargar el unico firmware que se encuentra en el soporte de octopus

-abrir octopus seleccionar el modelo
-pestaña Omap
-dar en conectar
-Y con el telefono apagado , precionar vol + y conectar el usb eh iniciara el proceso ,esperar aque termine y listo.


si ya esta posteado solo eliminar saludos .

[Anunciante Autorizado]

[JYX]

que version de android tiene este flash?