Problemas Galaxy Note Sin Imei Sin Imeisv Sin Serial Sin Baseband, ayuda expertos asansam sgtool z3x octopus sam Opciones

[MEMO2007]

bueno amigos como les digo tengo un galaxy note n7000 que esta sin baseband sin imei sin imeisv sin serial ya repare la baseband con asansam pero se flashea y vuelve y queda unknow si se trata de reparar el imei tambien y al hacer root me queda el triangulo ...

alguna solucion ... anexo imagenes

 20130406... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1.71mb ) Número de descargas: 0

 20130406... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2mb ) Número de descargas: 0

 20130406... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.09mb ) Número de descargas: 0

 20130406... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1.89mb ) Número de descargas: 0

[Anunciante Autorizado]

[RATA24]

carga otro soft e intenta reparar el imei, primero haz un root al equipo, ya con el super usuario intenta reparar imei y checa si los demas parametrso se corrigen

[MEMO2007]

ya esta rooteado

donde puedo conseguir flashes con kernel o flashes rooteadas

amigo lo flashee con otra flash 2.3.5 no la q posteaste

log z3x

Selected model: N7000
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 115200
Reading phone info...
Model: GT-N7000
Android version: 2.3.5
Product code: Unknown
Phone version: Unknown
PDA version: N7000XXKJ1
CSC version: N7000OXAKJ1
IMEI: Unknown
Checking Super user right... true
Writing EFS to phone... OK
Rebooting phone... OK
Searching Samsung modem... detected COM62
Waiting while modem will be ready...
No answer from phone
Done with Samsung Tool v.14.2
Done with Samsung Tool v.14.2

[superman]

instala asansam ultima version , rootea, pone en modo avion, depuracion luego haces el procedimiento normal

[TSM]

Z3x me ha sacado el ix del SIII sin mucho problema marcando el I9250 intenta lo mismo primero por usb luego te dice que te pases al com y el repara .. luego si te repara el imei y no tienes señal instala el busybox & ariza patch y todo volvera a la normalidad

[MEMO2007]

con asansam

UBTool Rev1.0.8 By ASAN-GSM TEAM
---------------------------------------------
Important Note:
Before Using This Tool Check and Be Sure :
1) Your Phone Has Complete ROOT Access
2) Your Phone Must be in AirPlane Mode
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing BLACK Method ...OK
Model : GT-N7000
Serial No. : NULL
Baseband Version : NULL
GSM Baseband Version : NULL
Bootloader Version : unknown
Build Version : 2.3.5
Repairing EFS ... OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:15
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing BLACK Method ...OK
Model : GT-N7000
Serial No. : NULL
Baseband Version : NULL
GSM Baseband Version : NULL
Bootloader Version : unknown
Build Version : 2.3.5
Repairing EFS ... OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:14
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing BLACK Method ...OK
Model : GT-N7000
Serial No. : NULL
Baseband Version : NULL
GSM Baseband Version : NULL
Bootloader Version : unknown
Build Version : 2.3.5
Repairing EFS ... OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:18
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing NV DATA ... OK
Cleaning NV DATA ... OK
Rebooting ... OK
Device Found!
Initializing NVM ... OK
Downloading NVM ... OK
Rebooting ... OK
Phone Reset Done!
--------------------------------------------
Operation Completed
Operation Time: 00:01:53
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Analyzing NVM ... OK
Cleaning & Finalizing NV DATA ... OK
Rebooting ... OK
Phone Reset Done!
--------------------------------------------
Operation Completed
Operation Time: 00:00:14
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing NV DATA ... OK
Cleaning NV DATA ... OK
Rebooting ... OK
Device Found!
Initializing NVM ... OK
Downloading NVM ... OK
Rebooting ... OK
Phone Reset Done!
--------------------------------------------
Operation Completed
Operation Time: 00:00:56
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing Green Method ...OK
Repairing EFS ... OK
Finalizing EFS ... OK
Rebooting ... OK
Phone Reset Done!
--------------------------------------------
Operation Completed
Operation Time: 00:00:43
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing BLACK Method ...OK
Model : GT-N7000
Serial No. : NULL
Baseband Version : NULL
GSM Baseband Version : NULL
Bootloader Version : unknown
Build Version : 2.3.5
Repairing EFS ... OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:24

con z3x


Selected model: N7000
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 115200
Reading phone info...
Model: GT-N7000
Android version: 2.3.5
Product code: Unknown
Phone version: Unknown
PDA version: N7000XXKJ1
CSC version: N7000OXAKJ1
IMEI: Unknown
Checking Super user right... true
Writing EFS to phone... OK
Rebooting phone... OK
Searching Samsung modem... detected COM37
Waiting while modem will be ready...
No answer from phone
Done with Samsung Tool v.13.9
Done with Samsung Tool v.13.9

con la ultima version de asansam

-----------------------------------------------------------------------------------------------
Turn-on the Phone Goto 'Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver.
-----------------------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Reading Phone Informations ...

Model : GT-N7000
Android Version : 2.3.5
PDA Version : N7000XXKJ1
CS Version : N7000OXAKJ1
Phone Version : NULL
IMEI : NULL
Disabling Security ...Done!
Rebooting... OK!

Now Remove USB Cable and Wait Phone Powering Up Completely (Media Scanners Passed) Then insert UART cable to Phone to Continue

Delay 60 Seconds...
Searching for phone on COM122 ...Fail!
Phone not found!
Operation Completed
Operation Time: 00:04:50
-----------------------------------------------------------------------------------------------

Mensaje modificado por MEMO2007 el Apr 7 2013, 11:32 PM

[superman]

amigo desistala esa version de asansam e instala la ultima version te lo saca de una luego reparas con z3x

[MEMO2007]

amigo alguien que pueda subir un efs bueno de este equipo N7000 para las cajas ya mensionadas.. y unos firmwares con kernel modificado o ya rooteados

[MEMO2007]

si hay solucion o toca solo por jtag..??

[MEMO2007]

Z3x me ha sacado el ix del SIII sin mucho problema marcando el I9250 intenta lo mismo primero por usb luego te dice que te pases al com y el repara .. luego si te repara el imei y no tienes señal instala el busybox & ariza patch y todo volvera a la normalidad

amigo gracias por tu respuesta

amigo ya flashee con 2.3.5 rootee instele el busy box y con ninguna box puedo reparar el baseband ni el imei ni el serial

[hulkteys]

Prueba con polar box siguiendo el metodo como si fuera s3 i9300, y termina parcheando con patchariz