Programaciones Cdma Aporte!!!, PUEDEN CONTRIBUIR CON LO QUE TENGAN Opciones

[UNIVERCELL]

AUDIOVOX-107 NAM PROGRAMMING:


Nam Set: 45680*47*869#1


AUDIOVOX 4000, 9000, 9100, 9155, 9500, ETC NAM PROGRAMMING:


(Power the phone on and wait until the little light on top goes out)

Nam Set: 289+fcn+#+1

Service menu: fcn+00+fsc(000000)

Test Mode: Hold (2,*,Rcl)+Power

Test Mode Commands:

99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code
129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range


AUDIOVOX 8610, 8910, ETC NAM PROGRAMMING:

Name Set: ##847446, end, 111111


AUDIOVOX 9950 NAM PROGRAMMING:

Nam Set: ##3282


AUDIOVOX CDM-100, 130, 135, 8300, 8500, 8600, ETC NAM PROGRAMMING:

Nam Set: ##20022002+Pwr+1+Spc


AUDIOVOX PCX-3500XL NAM PROGRAMMING:

Nam Set: ##2726+Send+1998+1+Spc+1


AUDIOVOX TEST MODE 9100, 9155:

1) Turn on the phone. As soon the phone comes on and the green light turns off press RIGHTARROW, 0, 0. The phone will ask for the "FSC Code", press 000000 then choose OK and press RIGHTARROW,

RIGHTARROW. Your phone is now in test mode.


2) The signal strength is the number on the top right hand side of the screen.


3) To turn off test mode shut of the phone and then turn it back on.


AUDIOVOX THERA (TOSHIBA 2032) NAM PROGRAMMING:

Thera Nam Programming User Manual - nam_thera.pdf


AUDIOVOX Z800 (AUDIOVOX 7900, SHARP) NAM PROGRAMMING:

Nam Set: m + # + envelope key + * + 1



MOTOROLA 7760, 7860, 2260, 8160, ETC NAM PROGRAMMING:

Nam Set: Fcn,0000000000000, Rcl


Nam Set: 74663#, Fcn, Fcn


Test Mode: Fcn, 00**83786633, Sto



MOTOROLA MS200, MS230, ETC NAM PROGRAMMING:

Nam Set: 5759789*# (spc - 915037)



MOTOROLA STARTAC 2004 NAM PROGRAMMING:


Nam Set: 5759789*#, rec key (3)times (spc - 915037)



MOTOROLA T182, C210, ETC NAM PROGRAMMING:


Nam Set: ##1111 end


Nam Set: ##298645665 end


Short Nam: ##073887 sto




MOTOROLA V3 PROGRAMING:

74663 # clr clr o ##spc#



MOTOROLA V60C, V120C ETC NAM PROGRAMMING:


Nam Set: 74663#, Menu, Menu, Spc


Nam Set: Menu, 073887, * (type quickly)


Test Mode: Menu, 073887*, Spc


Debug Mode: ##33284


Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)






MOTOROLA V710, V730, V740, MS150, ETC NAM PROGRAMMING:


Nam Set: 8378*# + press 3 times NATE (spc - 071082)


Test Mode: Menu, 073887*, Spc


Service Menu: #758353266#646#


MOTOROLA V6060 NAM PROGRAMMING:


Nam Set:147*369#456*0#

MOTOROLA TEST MODE v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press 000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable" choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow the above sequence and scroll down to where it says "DISABLE" instead of "ENABLE" and choose select.
Motorola Bible - bible.txt


MOTOROLA E815

es de verizon
equipos eli
74663 gato menu menu selc nan uno el codigo de seguridsd 000000 precionan ok e ingresas el min y des pues seliection mdn ingrersas salir

sisidcdma cambiar el cid q corresponda atu ciudad despues le das 2 veces ok


SAMSUNG I300, ETC NAM PROGRAMMING:

1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. Enter OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice



TEST MODE COMMANDS:

411_test_mode.txt

811_test_mode.txt

n105_test_mode.txt

n240_test_mode.txt

n260_test_mode.txt

a500_test_mode.txt

a530_test_mode.txt


SAMSUNG I700, ETC NAM PROGRAMMING:

Nam Set: Go to start and select "PHONE" from the drop down menu, dial #83587

SAMSUNG X, E, V-SERIES, E250, E300, V420, ETC NAM PROGRAMMING:


Nam Set: 6548#0**4#6

Nam Set: 47*869#08#9

Nam Set: 74153697193

Test Mode: 5809540*45680

Debug Menu: Menu(2sec)+0, 6725 or 9720


SAMSUNG A300, A530, A620, A660, ETC NAM PROGRAMMING:

Nam Set: Menu, 6, *

Service Menu: Menu, 9, *

Test Mode: 47*68#13580


SAMSUNG I730 D VERSIÓN PROGRAMING:

si no ##spc #

si no menu configuracion * pide spc y ok

menu 0


menu configuracion pantalla y numero 4
pide spc se lo pones
y le das ok


SAMSUNG SCH-411, 611, N105, A100, A300, A2000, ETC NAM PROGRAMMING:


Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key: Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69


SAMSUNG SPH-N240, N400, A460, A500, ETC NAM PROGRAMMING:


Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok




SAMSUNG A740

(BELL)/.A8'0 (BELL)
## 675 ok

SAMSUNG A530/A620/N195/N356
menu 6 *

SAMSUNG N362

(Izrail6)
yae'"90shch#*y0*#*9ye'20

SAMSUNG A460/N240/A500/N400
## 000000

SAMSUNG A610
menu 9 *

SAMSUNG A630
menu 5 *

SAMSUNG A300/N105/A100/A562/A611

ya"*8'9#08#9 and menu 60

SAMSUNG A560

## 3282 #

SAMSUNG A660

menu ## 000000 ok and ## 3282 ok

SAMSUNG A670

menu 7 2 * (000000)

SAMSUNG A680

## 000000 ##

SAMSUNG A790

menu 0 and menu 2 0

SAMSUNG A860

menu, setting *

SAMSUNG X, E, V


- series
'shchya8#0**ya#' and ya"*8'9#08#9 and 74153697193

SAMSUNG E300


741 53 697 193


AMC450 Nam Programming:

Nam Set: *74269#*748#96148063+SEL


Samsung

All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##


Samsung A500


1. Enter ## and the 6 digit SPC
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete


Samsung N240 and N400

1. Enter ## and type in the 6 digit SPC
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming

Samsung Uproar

1. Press MENU key
2. Enter 9 2 0
3. Enter the SPC
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete
Samsung N300
1. Press ## followed by the SPC
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle


Samsung i300


1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER SPC
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice


Samsung A400 and A460

1. Enter ## and SPC
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle


Samsung 3500 8500 6100 N200


1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter SPC
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete


Qualcomm


QCP-800 programming: menu + 3 + 0.
SPC: "000000" or may be other SPC typed by user.
QCP-820/1920/2035: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.



QCP 1960 and 2760


1. Press softkey under the work MENU
2. Press 8 0
3. Enter the SPC
4. Press softkey for OK
5. Enter MIN and press softkey for OK
6. No SID is require for this handset
7. Press softkey for EXIT
8. Programming is complete


LG

LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user
A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key

LGC-330W

programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key

LGC-800W /500

programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key






LGC-510

programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key

LG1010 LG4NE1 TP2200 TP2100

Touchpoint SB/DB TP 1100 TP5200
1. Press ##
2. Enter the SPC
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete


LG5350


1. Enter ## and enter the SPC and press the left soft key under the word “Save”
2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key
TP 2100


1. Press ##
2. Enter SPC
3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
4. Select NEXT (by pressing in the roller ball)
5. Scroll to EDIT and press in the roller ball
6. Enter MIN
7. Scroll to SAVE and press roller ball in
8. Select NEXT at the next 3 screens and then EXIT
9. Programming is complete


TP3000


1. Press ##
2. Enter SPC
3. Scroll to SAVE and press OK
4. Open flip
5. Use Stylus to enter the 10 digit MIN
6. Press OK (No SID entry is required)
7. Programming is complete


TP 5250


1. Press ##
2. Enter the SPC
3. Scroll to SAVE and press OK
4. The phone display will read SVC Program
5. Scroll to MOBILE PHONE # and press OK
6. Phone display will read Mobile Phone Number
7. Enter the 10 digit MIN and press OK
8. Scroll to Home SID and press OK
9. Enter the 4 digit SID (4654) and press OK
10. Reset Phone will be highlighted. Press OK
11. Phone will reset
12. Programming is complete


LG V111(DM110)


[menu]30.
After ask lockcode, enter: 843691.


Ericsson

Programming:
Shot NAM 987 + menu
Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by user.
CDMA mode 904093 + menu
Analog mode 904095 + menu DM mode 904959 + menu


Hyundai


HGC-120E / -130E programming: #86904**89397#
HGC-600E programming: ##20022002, END and enter SPC: "000000" or may be other SPC typed by user.

[Anunciante Autorizado]

[giovana]

con esas programaciones se puden hacer los famosos verizon??

tengo un motorola v3m

[WarGun]

para el v3 de verizon la programacion es 74663#clear clear

[UNIVERCELL]

si se puede

checale con 74663# clear claer

o

#073887* unicamente motorolas checa si entra es decir que esta en spc 00000 y puedes activarlo

[Eliminado_maryreyes_*]

hola amigos me gustaria saber si alguno de ustedes ha escuchado acerca de los planes de page plus????

[Eliminado_maryreyes_*]

lo que pasa es que tengo problemas para poder programar el lg vx8500 con el internet, no se si alguien puede ayudarme???/

[RATA24]

amigo si eres de mexico preguntale operador que te activa las lieas de iusa, supongo que si tienes quien te las active verda
y si no deja yo le pregunto y te paso la persona que me activa pero creo que las reglas no me permiten postear contacto de msn

Mensaje modificado por RATA24 el Nov 24 2009, 01:42 AM

[riosvideogames]

no funciona para el i300 samsung galaxy

[calentano]

k tal amigos del clan espero tengan un buen dia disculpen pero alguien me pod
ria ayudarual es la programacion del sanyo sprint modelo mm-8300 de antemano grasias y como sacar el spc saludos