Tecno Bf6 Frp Opciones

[yurinieves]

Operation: Connect Tecno BF6 Boot [FF] FireFly [v2.27]
Wait...
- Power device Off
- Connect cable [remember Vol+ | Vol-] [remember Test-Point]
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM20) vid 0x1782 pid 0x4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec Ok
Dev UID: bae3c7a0e454f177bb1de00ff1bd016d62525253f3dbf96deef4d8a78ff8beab

get storage info...
EMMC
CID: D6010341334135363112AA1A35D22AAB crc Ok
Vendor: Foresee OEM: 259 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 2853844434 0xAA1A35D2
MM/YY: 2/2023
CSD: D0FFFF329F5903FFFFFFFFEF964000FF
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01
EXTCSD rev1.8 EMMC 5.1 FW: 12
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x08
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x1000000 16.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 64 Gb Actual 0xE67800000 57.62 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: Not defined
read extcsd... Ok
extcsd backup exist, skip: C:\InfinityBox\CM2SP3\backup\ext_csd\none_bae3c7a0e454f177_extcsd_00D6-Foresee_A3A561_5.1_2024-06-20.bin
Verify config values... Ok

get partitions...
Partitions: 71
Connected

get sw info... 13 sec
Product Brand: TECNO
Product Device: TECNO-BF6
Product Model: TECNO BF6
Product Name: BF6-OP
SW: TECNO/BF6-OP/TECNO-BF6:12/SP1A.210812.001/230323V471:user/release-keys
SW Version: 230323V471
Market Name: TECNO POP 7
Display ID: BF6-SE668SABCDE-SGo-OP-230323V471
Patch Level: SP1A.210812.001
Ver. CodeName: REL
Ver. Release: 12
Sec. Patch: 2023-03-05
Build Time: 23/03/2023 2:52:39 PM
Product Info: BF6
SW: BF6-user 12 SP1A.210812.001 471 release-keys
Product Manfct: TECNO
Product Board: BF6
Board Platform: sp9863a
Android ver: 12
UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]
Device ID: tecno-bf6-bf6-op-tecno-pop-7
Strategy: [tecno]
Firmware ID: SP9863A_TECNO_TECNO_BF6_OSv12_BF6-SE668SABCDE-SGo-OP-230323V471_SP1A.210812.001_BF6
Backup 8 items to: C:\InfinityBox\CM2SP3\backup\sp9863a_bae3c7a0e454f177\
Read to C:\InfinityBox\CM2SP3\backup\sp9863a_bae3c7a0e454f177\
Reading...
Read [1/71] prodnv 10.00 Mb Ok
Read [2/71] miscdata 1024.00 Kb Ok
Read [8/71] uboot_a 1024.00 Kb Ok
Read [9/71] uboot_b 1024.00 Kb Ok
Read [13/71] l_fixnv1_a 2.00 Mb Ok
Read [14/71] l_fixnv2_a 2.00 Mb Ok
Read [15/71] l_fixnv1_b 2.00 Mb Ok
Read [16/71] l_fixnv2_b 2.00 Mb Ok
Saved 8 of 8 images, 21.00 Mb of 21.00 Mb
Done 8 files
Compress: C:\InfinityBox\CM2SP3\backup\sp9863a_bae3c7a0e454f177\
Cleanup...
Ok
Verify C:\InfinityBox\CM2SP3\backup\sp9863a_bae3c7a0e454f177.7z Verified [cdd93288]

Read Device-ID...
IMEI[0]: 35170123*******
IMEI[1]: 35170123*******
IMEI[2]: 86740002*******
IMEI[3]: 86740002*******
BT MAC: f0:c7:45:5c:db:dc
WiFi MAC: ---
PSN1: ---
PSN2: ---
PSN3: N/A
get slots... slot: b
MemTool load 71 items
Finished 1 min 39 sec

Operation: Reset | Format Tecno BF6 Boot [FF] FireFly [v2.27]
WARNING: Reset may delete ALL USER DATA!
Continue? Yes
[-] Wipe
[-] Userdata
[+] FRP
[+] Smart
Reset Userdata is Off
If FRP still active after reset make Userdata On and repeat operation
Wait...
Backup exist: C:\InfinityBox\CM2SP3\backup\sp9863a_bae3c7a0e454f177\
Stage: FRP...
Looking for items... 1 items found
[1] Writing... Ok
Completed
Stage: Smart...
[17] Format... Ok
[18] Format... Ok
Completed
Finished 7 sec
Reboot... Disconnect cable if it freez
fault 0x05 0x8E | BSL_PHONE_WAIT_INPUT_TIMEOUT
Bye