Aporte Frp Samsung J327v 8.1.0 Bit2 Opciones

[chipscell]

1- flash combinación bit2 completa usé esta COMBINATION_VZW_FA70_J327VVRU2ARH1 descargar del soporte z3x por el shell

2- activar modo OEM, modo desarollador y luego apgagarlo

2.- flash firmware completo J327VVRU2BRHA_VZW2BRHA descargar del soporte z3x por el shell

Operation: Flash
Selected model: SM-J327V
Software version: 35.2

File analysis... OK
Total file size: 0x4431D4CC (1091 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending devcfg.mbn... OK
Sending NON-HLOS.bin... OK
Sending cmnlib.mbn... OK
Sending keymaster.mbn... OK
Sending lksecapp.mbn... OK
Sending sec.dat... OK
Sending apdp.mbn... OK
Sending msadp.mbn... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending adspso.bin... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:01:32)

Done with Samsung Tool PRO v.35.2

Operation: Flash
Selected model: SM-J327V
Software version: 35.2

File analysis... OK
Total file size: 0xEDA80F22 (3802 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn.lz4... OK
Sending sbl1.mbn.lz4... OK
Sending rpm.mbn.lz4... OK
Sending tz.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending keymaster.mbn.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending lksecapp.mbn.lz4... OK
Sending sec.dat.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.ext4.lz4... OK
Sending persist.img.ext4.lz4... OK
Sending userdata.img.ext4.lz4... OK
Sending modem.bin.lz4... OK
Sending adspso.bin.lz4... OK
Sending cache.img.ext4.lz4... OK
Flashing done (time - 00:04:33)
Done with Samsung Tool PRO v.35.2