Blade L2 Boot Info Opciones

[yahirquintana]

alguien me podria ayudar con otro telefono que me llego es un blade l2 zte ya por experiencia que e tenido son un poco malos pero le e leido la boot info con la nck y me sale esto

Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6582
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM8)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) SANDISK 0x53454d303447
EMMC FW VERSION: 28:00:00:00:00:00:00:00
EMMC CID: 45010053454D30 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec600000 [3.693 GB]
Wait untill phone will start charging.
All done.

me podrian decir si tiene la emmc mala o si agarra software por que e tratado con el spft y no me lo agarra me da errores no se si sea por el firmware que le estoy instalando o que

[Anunciante Autorizado]

[yahirquintana]

consegui una firmware del blade l2 y le di full flash skip preloader y en el proceso me aparecio esto

Flash files count is :10
Action : Firmware update.
Selected Zte: Blade L2
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Full Flash Skip Preloader
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM8)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) SANDISK 0x53454d303447
EMMC FW VERSION: 28:00:00:00:00:00:00:00
EMMC CID: 45010053454D30 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec600000 [3.693 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM9)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x3c780000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x44580000 - LEN: 0x40000000
Send preloader...
Error: S_SECURITY_SECURE_USB_DL_ROM_INFO_UPDATE_REQUEST_FAIL
All done.

quien tiene experiencia que me diga o me oriente que salio mal