Frp Lenovo Tab 3-710l |
Bienvenido, invitado ( Identificarse | Registrarse )
![]() ![]() |
Frp Lenovo Tab 3-710l |
Jul 17 2018, 05:34 PM
Publicado:
#1
|
|
|
Miembro del Clan ![]() Grupo: Miembros Mensajes: 41 Agradecimientos: 33 Registrado: 22-October 08 Desde: USA Miembro No.: 9,859 Pais:
|
facil y rapido con nck solo abrimos modulo mtk seleccionamos frp conectamos apagado
y listo Exe version: NCKDongle AndroidMTK 2.5.8.7 Selected model: ELBRUS Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM10) Boot mode: Preloader Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 EMMC FW VERSION: 07:00:00:00:00:00:00:00 EMMC CID: 90014A483847316505 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2c00000 [7.293 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : DA USB VCOM Port (COM11) -Reading GPT Drive OK Checking data, wait... Erasing FRP, wait... FRP Reset Done. Wait untill phone w |
|
|
|
A continuacion 4 usuario(s) le Agradece(n) a OkVic77 por su Colaboracion: alejandro30, gabtoucz80, Refaccell, ZoRt | |
![]() ![]() |
| Ver Visitas | Fecha y Hora actual: 23rd April 2026 - 04:36 AM |