Super Aporte Frp Para Zte Axon 7 Mini Los Que No Tienen Modo Recovery Y Cuentan Con Umt Opciones

[freddy122411]

para los que cuentan con umt solo se necesita ingresas al modulo qualcomm Seleccionar en boot 8952 apagar el telefono apretar volumen mas y volumen menos conectar al cable usb y iniciara el proceso

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1209700 [8952] 04000000
OPK_DATA : E8905D68B0F309D55B9E28678BFCB56A2447AF1F730EC152AE BEF94F0DB377C8
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8952_lite.mbn]...Done
Executing Loader...OK
Hardware* : 8952, eMMC, 32 GB
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : ZTE ZTE B2017G [msm8952]
Software : ZTE B2017G V1.0.0B04, eng.zte.20160919.215018 [Mon Sep 19 21:54:41 CST 2016]
Android Ver. : 6.0.1
Resetting FRP Lock.........Done
Operation Finished.
Module Ver. 1.1.2