Unlock 4017a No Lo Realiza La Dongle Opciones

[zumy]

no logro realizar el unlock de este modelo ya intente y se me quedo pegado en el logo le realize una copia de otro modelo y se la reflashee y todabia sigue pegado en el logo y al realizar unock me da este error alguien e ayuda
este mi log de oprearaciones

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.7
Selected model: OT-4017A
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM3)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM70)
OTP IMEI: 010809
MODEL FROM PROINFO: 4017A-2BAVHN1
SECRO FROM PROINFO: XBL0NT00AZ10
Reading security, wait...
Unlock s not supported for this model

Wait untill phone will start charging.
All done.