Aporte Frp H870 Nueva Seguridad (h87011f Nov 2017) Opciones

[angel0mar]

Buen día colegas, les traigo el método para la cuenta google de un G6 Telcel andorid 7.0. Vi varios post en los que no podían sacarlos con la nueva seguridad y que algunos se morían si se degradaba. Pude sacar uno con parche de noviembre 2017 precisamente degradando el equipo. No pasa nada, háganlo. Yo lo hice con el H87010l_00_OPEN_EU_OP_0622.oct que viene en el soporte de octopus.

1. Abrir cotopus y degradar el equipo con H87010l_00_OPEN_EU_OP_0622.oct
2. una vez que termine el proceso y encienda el equipo colocarlo en modo Download
3. seleccionar reseteo de FRP
4. cobrar y ser feliz

09/01/2018 11:13:33 a.m. > Checking data...09/01/2018 11:13:34 a.m. > OK
09/01/2018 11:13:34 a.m. > Platform: LG Qualcomm
09/01/2018 11:13:34 a.m. > Selected port: COM215
09/01/2018 11:13:34 a.m. > Selected model: H870
09/01/2018 11:13:34 a.m. > Reading info...
09/01/2018 11:13:36 a.m. > Model ID: LG-H870
09/01/2018 11:13:36 a.m. > IMEI: --------------------------
09/01/2018 11:13:36 a.m. > Android version: 7.0
09/01/2018 11:13:36 a.m. > Battery level: 100%
09/01/2018 11:13:36 a.m. > SW Version: 09/01/2018 11:13:36 a.m. > H87011f
09/01/2018 11:13:36 a.m. > Mode: Emergency
09/01/2018 11:13:36 a.m. > Initializing flash...09/01/2018 11:13:39 a.m. > OK
09/01/2018 11:13:40 a.m. > SW version: 09/01/2018 11:13:40 a.m. > LGH870AT-01-V11f-334-020-NOV-03-2017+0
09/01/2018 11:13:40 a.m. > Android version: 7.0
09/01/2018 11:13:40 a.m. > LAF Version: 1.1
09/01/2018 11:13:40 a.m. > Product ID: SM06S170415000878
09/01/2018 11:13:40 a.m. > IMEI: -------------------------------
09/01/2018 11:13:40 a.m. > Target operator: GLOBAL
09/01/2018 11:13:40 a.m. > Hardware: rev_10
09/01/2018 11:13:40 a.m. > Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
09/01/2018 11:13:43 a.m. > Opening "H87010l_00_OPEN_EU_OP_0622.oct"...09/01/2018 11:13:43 a.m. > OK
09/01/2018 11:13:43 a.m. > Setting options...09/01/2018 11:13:45 a.m. > OK
09/01/2018 11:13:45 a.m. > Reading partitions...09/01/2018 11:14:10 a.m. > OK
09/01/2018 11:14:10 a.m. > Formating USERDATA...09/01/2018 11:14:17 a.m. > OK
09/01/2018 11:14:17 a.m. > Formating ENCRYPT...09/01/2018 11:14:21 a.m. > OK
09/01/2018 11:14:21 a.m. > Sending signature...09/01/2018 11:14:21 a.m. > OK
09/01/2018 11:14:21 a.m. > Writing PrimaryGPT...09/01/2018 11:14:21 a.m. > OK
09/01/2018 11:14:21 a.m. > Writing laf...09/01/2018 11:14:24 a.m. > OK
09/01/2018 11:14:24 a.m. > Writing lafbak...09/01/2018 11:14:28 a.m. > OK
09/01/2018 11:14:28 a.m. > Writing factory...09/01/2018 11:14:28 a.m. > OK
09/01/2018 11:14:28 a.m. > Writing persist...09/01/2018 11:14:28 a.m. > OK
09/01/2018 11:14:28 a.m. > Writing system...09/01/2018 11:27:44 a.m. > OK
09/01/2018 11:27:44 a.m. > Writing BackupGPT...09/01/2018 11:27:44 a.m. > OK
09/01/2018 11:27:44 a.m. > Writing PrimaryGPT...09/01/2018 11:27:48 a.m. > OK
09/01/2018 11:27:48 a.m. > Writing xbl...09/01/2018 11:27:48 a.m. > OK
09/01/2018 11:27:48 a.m. > Writing xblbak...09/01/2018 11:27:48 a.m. > OK
09/01/2018 11:27:48 a.m. > Writing BackupGPT...09/01/2018 11:27:48 a.m. > OK
09/01/2018 11:27:48 a.m. > Writing PrimaryGPT...09/01/2018 11:27:52 a.m. > OK
09/01/2018 11:27:52 a.m. > Writing xbl2...09/01/2018 11:27:52 a.m. > OK
09/01/2018 11:27:52 a.m. > Writing xbl2bak...09/01/2018 11:27:52 a.m. > OK
09/01/2018 11:27:52 a.m. > Writing BackupGPT...09/01/2018 11:27:52 a.m. > OK
09/01/2018 11:27:52 a.m. > Writing PrimaryGPT...09/01/2018 11:27:56 a.m. > OK
09/01/2018 11:27:56 a.m. > Writing BackupGPT...09/01/2018 11:27:56 a.m. > OK
09/01/2018 11:27:56 a.m. > Writing PrimaryGPT...09/01/2018 11:27:59 a.m. > OK
09/01/2018 11:27:59 a.m. > Writing boot...09/01/2018 11:28:01 a.m. > OK
09/01/2018 11:28:01 a.m. > Writing recovery...09/01/2018 11:28:03 a.m. > OK
09/01/2018 11:28:03 a.m. > Writing recoverybak...09/01/2018 11:28:06 a.m. > OK
09/01/2018 11:28:06 a.m. > Writing tz...09/01/2018 11:28:06 a.m. > OK
09/01/2018 11:28:06 a.m. > Writing tzbak...09/01/2018 11:28:07 a.m. > OK
09/01/2018 11:28:07 a.m. > Writing aboot...09/01/2018 11:28:07 a.m. > OK
09/01/2018 11:28:07 a.m. > Writing abootbak...09/01/2018 11:28:07 a.m. > OK
09/01/2018 11:28:07 a.m. > Writing raw_resources...09/01/2018 11:28:08 a.m. > OK
09/01/2018 11:28:08 a.m. > Writing raw_resourcesbak...09/01/2018 11:28:08 a.m. > OK
09/01/2018 11:28:08 a.m. > Writing rpm...09/01/2018 11:28:08 a.m. > OK
09/01/2018 11:28:08 a.m. > Writing rpmbak...09/01/2018 11:28:08 a.m. > OK
09/01/2018 11:28:08 a.m. > Writing hyp...09/01/2018 11:28:08 a.m. > OK
09/01/2018 11:28:08 a.m. > Writing hypbak...09/01/2018 11:28:09 a.m. > OK
09/01/2018 11:28:09 a.m. > Writing pmic...09/01/2018 11:28:09 a.m. > OK
09/01/2018 11:28:09 a.m. > Writing pmicbak...09/01/2018 11:28:09 a.m. > OK
09/01/2018 11:28:09 a.m. > Writing devcfg...09/01/2018 11:28:09 a.m. > OK
09/01/2018 11:28:09 a.m. > Writing devcfgbak...09/01/2018 11:28:09 a.m. > OK
09/01/2018 11:28:09 a.m. > Writing modem...09/01/2018 11:28:17 a.m. > OK
09/01/2018 11:28:17 a.m. > Writing sec...09/01/2018 11:28:17 a.m. > OK
09/01/2018 11:28:17 a.m. > Writing keymaster...09/01/2018 11:28:17 a.m. > OK
09/01/2018 11:28:17 a.m. > Writing keymasterbak...09/01/2018 11:28:18 a.m. > OK
09/01/2018 11:28:18 a.m. > Writing cmnlib...09/01/2018 11:28:18 a.m. > OK
09/01/2018 11:28:18 a.m. > Writing cmnlibbak...09/01/2018 11:28:18 a.m. > OK
09/01/2018 11:28:18 a.m. > Writing cmnlib64...09/01/2018 11:28:18 a.m. > OK
09/01/2018 11:28:18 a.m. > Writing cmnlib64bak...09/01/2018 11:28:18 a.m. > OK
09/01/2018 11:28:18 a.m. > Writing apdp...09/01/2018 11:28:18 a.m. > OK
09/01/2018 11:28:18 a.m. > Writing msadp...09/01/2018 11:28:18 a.m. > OK
09/01/2018 11:28:18 a.m. > Writing BackupGPT...09/01/2018 11:28:19 a.m. > OK
09/01/2018 11:28:19 a.m. > Writing PrimaryGPT...09/01/2018 11:28:22 a.m. > OK
09/01/2018 11:28:22 a.m. > Writing BackupGPT...09/01/2018 11:28:22 a.m. > OK
09/01/2018 11:28:22 a.m. > Writing PrimaryGPT...09/01/2018 11:28:25 a.m. > OK
09/01/2018 11:28:25 a.m. > Writing BackupGPT...09/01/2018 11:28:25 a.m. > OK
09/01/2018 11:28:25 a.m. > Writing OP_T...09/01/2018 11:29:04 a.m. > OK
09/01/2018 11:29:04 a.m. > Finalizing...09/01/2018 11:29:06 a.m. > OK
09/01/2018 11:29:06 a.m. > Writing firmware done!
09/01/2018 11:29:06 a.m. > Performed by 2.7.8 Software version.

[Anunciante Autorizado]

[nortonsixcel]

En estos tiempos sale sin degradar nada, dejo historial con modelo h870.

Checking data...OK
Platform: LG Qualcomm
Selected port: COM129
Selected model: H870
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable).
Reading info...
Model ID: LG-H870
IMEI:
Android version: 7.0
Battery level: 89%
SW Version: H87010e
Mode: Normal
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Resetting FRP Lock...
Detecting writing method...
Trying third method...OK
Formating FRP partition...OK
Checking data...
Resetting FRP lock successfully completed!
Performed by 2.8.4 Software version.

[jhon3]

Me pregunto si no se les ocurrió hacer un hard reset después de hacer frp con el software, para ver que pasa? alo mejor cuando inicie ya no pedirá cuenta y no alla necesidad de flashearlo?

efectivamente es hacer hard reset despues de frp con octoplus y enciende sin cuenta (probado)

[Eriksel]

En estos tiempos sale sin degradar nada, dejo historial con modelo h870.

Checking data...OK
Platform: LG Qualcomm
Selected port: COM129
Selected model: H870
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable).
Reading info...
Model ID: LG-H870
IMEI:
Android version: 7.0
Battery level: 89%
SW Version: H87010e
Mode: Normal
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Resetting FRP Lock...
Detecting writing method...
Trying third method...OK
Formating FRP partition...OK
Checking data...
Resetting FRP lock successfully completed!
Performed by 2.8.4 Software version.

esa que marque con negrita SW Version: H87010e es la version del software, con la que se batalla es con la SW Version: H87011e
la que funciona es la que esta en el soporte de octopus, por eso no es necesario que la suban aqui, oslo necesitan tener octopus

 Sin_t_tu... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 63.57k ) Número de descargas: 0


Mensaje modificado por Eriksel el Jun 25 2019, 06:19 PM

[ELKNS96]

hola amigos,saludos desde merida yucatan,les cuento.
si alguien tiene la z3x y tiene lg activado sale sin testpoint
acabo de hacer uno da 2 errores y marca frp done a los 5 segundos.
sale full sin degradar,lo testie asi por que no me salia manual ni con octopus...