Stratus C7 Unlock |
 |
|
Bienvenido, invitado ( Identificarse | Registrarse )
  |
Stratus C7 Unlock |
  Jan 26 2024, 07:26 PM
Publicado:
#1
|
|
|
Miembro del Clan  Grupo: Miembros Mensajes: 100 Agradecimientos: 115 Registrado: 4-March 13 Desde: USA Miembro No.: 443,599 Pais: 
 |
Lo hice con Pandora, darle en mediatek, desbloqueo de red y conectar y en segundos listo, dejar ambos botones de volumen precionados porque si no se desconecta
Host Power Off... OK Switch virtual port to NONE... OK Connect Type-C to HUB... OK Host Power On... OK Connect phone to [BOX] in BROM/PRELOADER Mode Waiting for device... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0] Device found at COM139 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0717 Get sec config... OK [00000000] Get HW & SW version from device... OK HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00 Detect chip [MT6761] Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Force switch to BROM... OK Host Power Off... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Waiting for device... OK Read usbhost speed... HIGH Read Device Descriptor... Get VID/PID...0E8D/0003 Send start cmd... OK Get HW code from device... 0717 Get HW & SW version from device... OK HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00 Detect chip [MT6761] Get sec config... OK [00000000] Switch virtual port to NONE... OK Connect Type-C to HUB... OK Waiting for device... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0] Device found at COM139 [BROM] Open port... OK Get HW code from device... 0717 Get sec config... OK [00000000] Get HW & SW version from device... OK HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00 Detect chip [MT6761] Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Reopen port for libver2... OK Get ME ID... OK ME_ID = 0x8C593D56, 0x6A2A6335, 0x83E0F702, 0x33580404 Get Chip ID... [MT6761] Get SOC ID... [1F1AA90F53E463E1D385FDC14CFB8849C6228C3774A147B33C34DDC3B6501382] Get sec config... OK [00000000] Load DownloadAgent... OK Search DA... OK [5] Send preloader... OK Start preloader... OK Checking preloader answer... OK Send bootloader... OK Start bootloader... OK Wait for answer from bootloader... OK Send SYNC signal... OK Setup device enviroment... OK Setup device parametres... OK Receive DA SYNC signal... OK Set DA parametres... OK Get device connection agent... [BROM] Get device info... OK EMMC_ID: 0x15010051333133424200A89EDC6224C3 Load EMI from phone... OK Parse EMI config... OK Init EXT RAM... OK Send 2nd DA... OK Get device info... OK EMMC INFO: EMMC_CNAME: Q313BB EMMC_ID : 0x15010051333133424200A89EDC6224C3 EMMC_BOOT1: 0x0000400000 (4.00Mb) EMMC_BOOT2: 0x0000400000 (4.00Mb) EMMC_RPMB : 0x0000400000 (4.00Mb) EMMC_USER : 0x03AB400000 (14.68Gb) RAM INFO: INT_SRAM: 0x000003A500 (233.25Kb) EXT_RAM : 0x0080000000 (2.00Gb) Checking USB status... USB_HIGH_SPEED Read partitions info from phone... OK Checking A/B state... OK [A] Read product info... [EXT4] ... OK Product Brand : Cloud_Mobile Product Manufacturer : Along Product Model : Stratus_C7 Product Name : Stratus_C7 Product Device : Stratus_C7 Product Board : w18 Board Platform : mt6761 Build ID : SP1A.230208.1603 Build Date : Wed Mar 15 09:59:22 CST 2023 Display ID : W18_Stratus_C7_20230315_1010 Security Patch : 2023-02-01 Version SDK : 31 Version Release : 12 Version Codename : REL Firmware Version : mp1V1704 Userdata FS Type : F2FS Read security partition from phone... OK Read security files... OK Read security files... OK Read lock info... OK Unlock... OK [DF1, UN] Write lock info... OK Write security partition to phone... OK Network Unlock done! Selected model: Mediatek Mediatek Operation: Unlock network Software version: 6.3 Mensaje modificado por LAB_SANTACRUZ el Jan 28 2024, 12:30 PM
Motivo de edición: movido en subforo correcto de acuerdo a la herramienta que utilizo.
|
 |
 
|
A continuacion 8 usuario(s) le Agradece(n) a john004 por su Colaboracion: chokii, cyberlawebon@, DAYCELL, glen1702, HammerHead, heavypako666, LAB_SANTACRUZ, tona12 | |
| Anunciante Autorizado |
Jan 26 2024, 07:26 PM
Publicado:
#
|
 Estas ofertas pudieran interesarte. |
|
|
|
|
|
Dec 18 2024, 03:02 PM
Publicado:
#2
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 100 Agradecimientos: 248 Registrado: 21-June 11 Desde: MEXICO Miembro No.: 222,802 |
Yo lo hice me salio todo bien pero no hagarro señal marca como si tuviera el chip de USA truConnect nose si esa compañía nose pueda liberar a alguien le a pasado?
|
|
|
|
A continuacion 2 usuario(s) le Agradece(n) a UNIVERCEL99 por su Colaboracion: jcarlosdiaz, junior_erik | |
|
Jun 18 2025, 04:53 AM
Publicado:
#3
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 3 Agradecimientos: 0 Registrado: 27-December 17 Miembro No.: 1,012,404 Pais: 
|
Hola, me puedes confirmar si te activó los datos móviles, en mi caso hizo la liberación y levanta señal perfecto pero no marca los datos moviles, ya cambie configuración del APN y sigue sin marcar los datos moviles, un saludo y gracias de antemano por el aporte.
|
|
|
|
|
Jul 8 2025, 07:14 PM
Publicado:
#4
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 3 Agradecimientos: 1 Registrado: 29-September 15 Miembro No.: 757,892 Pais: 
|
CITA(ludier @ Jun 18 2025, 05:53 AM)  Hola, me puedes confirmar si te activó los datos móviles, en mi caso hizo la liberación y levanta señal perfecto pero no marca los datos moviles, ya cambie configuración del APN y sigue sin marcar los datos moviles, un saludo y gracias de antemano por el aporte. pudiste resolver lo de losdatos |
|
|
|
|
Jan 14 2026, 12:53 PM
Publicado:
#5
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 100 Agradecimientos: 115 Registrado: 4-March 13 Desde: USA Miembro No.: 443,599 Pais:
|
CITA(john004 @ Jan 26 2024, 06:26 PM) Lo hice con Pandora, darle en mediatek, desbloqueo de red y conectar y en segundos listo, dejar ambos botones de volumen precionados porque si no se desconecta Host Power Off... OK Switch virtual port to NONE... OK Connect Type-C to HUB... OK Host Power On... OK Connect phone to [BOX] in BROM/PRELOADER Mode Waiting for device... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0] Device found at COM139 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0717 Get sec config... OK [00000000] Get HW & SW version from device... OK HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00 Detect chip [MT6761] Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Force switch to BROM... OK Host Power Off... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Waiting for device... OK Read usbhost speed... HIGH Read Device Descriptor... Get VID/PID...0E8D/0003 Send start cmd... OK Get HW code from device... 0717 Get HW & SW version from device... OK HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00 Detect chip [MT6761] Get sec config... OK [00000000] Switch virtual port to NONE... OK Connect Type-C to HUB... OK Waiting for device... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0] Device found at COM139 [BROM] Open port... OK Get HW code from device... 0717 Get sec config... OK [00000000] Get HW & SW version from device... OK HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00 Detect chip [MT6761] Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Reopen port for libver2... OK Get ME ID... OK ME_ID = 0x8C593D56, 0x6A2A6335, 0x83E0F702, 0x33580404 Get Chip ID... [MT6761] Get SOC ID... [1F1AA90F53E463E1D385FDC14CFB8849C6228C3774A147B33C34DDC3B6501382] Get sec config... OK [00000000] Load DownloadAgent... OK Search DA... OK [5] Send preloader... OK Start preloader... OK Checking preloader answer... OK Send bootloader... OK Start bootloader... OK Wait for answer from bootloader... OK Send SYNC signal... OK Setup device enviroment... OK Setup device parametres... OK Receive DA SYNC signal... OK Set DA parametres... OK Get device connection agent... [BROM] Get device info... OK EMMC_ID: 0x15010051333133424200A89EDC6224C3 Load EMI from phone... OK Parse EMI config... OK Init EXT RAM... OK Send 2nd DA... OK Get device info... OK EMMC INFO: EMMC_CNAME: Q313BB EMMC_ID : 0x15010051333133424200A89EDC6224C3 EMMC_BOOT1: 0x0000400000 (4.00Mb) EMMC_BOOT2: 0x0000400000 (4.00Mb) EMMC_RPMB : 0x0000400000 (4.00Mb) EMMC_USER : 0x03AB400000 (14.68Gb) RAM INFO: INT_SRAM: 0x000003A500 (233.25Kb) EXT_RAM : 0x0080000000 (2.00Gb) Checking USB status... USB_HIGH_SPEED Read partitions info from phone... OK Checking A/B state... OK [A] Read product info... [EXT4] ... OK Product Brand : Cloud_Mobile Product Manufacturer : Along Product Model : Stratus_C7 Product Name : Stratus_C7 Product Device : Stratus_C7 Product Board : w18 Board Platform : mt6761 Build ID : SP1A.230208.1603 Build Date : Wed Mar 15 09:59:22 CST 2023 Display ID : W18_Stratus_C7_20230315_1010 Security Patch : 2023-02-01 Version SDK : 31 Version Release : 12 Version Codename : REL Firmware Version : mp1V1704 Userdata FS Type : F2FS Read security partition from phone... OK Read security files... OK Read security files... OK Read lock info... OK Unlock... OK [DF1, UN] Write lock info... OK Write security partition to phone... OK Network Unlock done! Selected model: Mediatek Mediatek Operation: Unlock network Software version: 6.3 Yo lo hice y sin problemas, me levanta datos, telcel , soy de mexico a lo mejor tendra algo que ver porque a muchos no les levanta datos, si se queda arriba la marca del cel y no dice telcel pero todo normal |
|
|
|
|
|
|
Fecha y Hora actual: 18th April 2026 - 06:04 PM |
