Wolder (wiam #23), Read Pattern & Imei Repair Opciones

[pmarrero]

* Dispositivo que llegó con el patrón olvidado (realizar Read Pattern)

* Realizar primeramente boot info para identificar correctamente el dispositivo

01- Abrir el software: NCK Dongle AndroidMTK PRO v2.7.7
02- Ir a la pestaña Main, en Phone Setting elegir 0-By CPU y en procesador elegir MT6735M
03- Accionar el botón: Read phone info in flash mode
04- Conectar el dispositivo apagado y esperar a que termine la lectura

Action : Boot Info.
Selected 0-By CPU:MT6735M
Exe version: NCKDongle AndroidMTK 2.7.7
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(25) : PreLoader USB VCOM (Android) (COM25)
[25] \\?\usb#vid_0e8d&pid_2000#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SANDISK 0x445331303038
EMMC FW VERSION: 30:30:36:30:33:33:00:00
EMMC CID: 450100445331303038 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Build ID: LMY47D
Display ID: WIAM23_01_v1.0.15
Version: 5.1
Build Date: Fri Jul 8 14:58:35 CST 2016
Model: WIAM #23
Brand: Wolder
Device: WIAM #23
Manufacturer: Wolder
Region: ES
Mediatek Version Release: ALPS.L1.MP3.V2_MLT6735M.35GU.L1_P44
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
This phone have FRP partition.

05- Ir a la pestaña: FRP-Pattern-Privacy
06- Accionar el botón: [FM]Read Pattern y conectar el dispositivo apagado

Exe version: NCKDongle AndroidMTK 2.7.7
Selected model: 0-By CPU: MT6735M
Action: Read Pattern
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(25) : PreLoader USB VCOM (Android) (COM25)
[25] \\?\usb#vid_0e8d&pid_2000#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SANDISK 0x445331303038
EMMC FW VERSION: 30:30:36:30:33:33:00:00
EMMC CID: 450100445331303038 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(26) : DA USB VCOM Port (COM26)
[26] \\?\usb#vid_0e8d&pid_2001#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
**************************************
1 2 3
4 5 6
7 8 9
Pattern: XXXXX
**************************************
Pattern HEX: 5865C4F5E1E417F31C5E0F134E08D62D57E1470D
**************************************
Wait untill phone will start charging.
[0]All done.

07- Configurar seguridad y eliminar el patrón

* Dispositivo que tenía el IMEI en null (reparar el IMEI solo por el que se encuentra en la pegatina tras la batería)

01- Ir a la pestaña IMEI Utils
02- En Connection Mode elegir Flash Connection
03- Accionar el botón Repair IMEI
04- En la nueva ventana, en los apartados IMEI1 e IMEI2 colocarles los IMEI`S originales del dispositivo
05- Accionar el botón: Do Selected Job
06- Conectar el dispositivo apagado y esperar a que culmine la reparación

Selected connection metod: Flash Connection
Exe version: NCKDongle AndroidMTK 2.7.7
Selected phone: MT6735M
Action : IMEI REPAIR.
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(25) : PreLoader USB VCOM (Android) (COM25)
[25] \\?\usb#vid_0e8d&pid_2000#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SANDISK 0x445331303038
EMMC FW VERSION: 30:30:36:30:33:33:00:00
EMMC CID: 450100445331303038 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(26) : DA USB VCOM Port (COM26)
[26] \\?\usb#vid_0e8d&pid_2001#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Dumping data, wait.
Reading imei
IMEI[1]: unknown
IMEI[2]: unknown
Backup saved: C:\ProgramData\Android_MTK_Backup_Folder\nvram_backup\FLASH_MODE_NVRAM_MT6735M_xxxxxxxxxxxxxxx_xxxxxxxxxxxxxxx_01_31_2022_09_35_4
.zip
Writing imei
IMEI[1] TO UPDATE: xxxxxxxxxxxxxxx
IMEI[2] TO UPDATE: xxxxxxxxxxxxxxx
Generic IMEI OK

07- Realizar un Hard Reset desde adentro para que sean ejecutados los cambios correctamente
08- Realizar test a señal y datos

* Realizada una copia al Firmware y a los Ítems de seguridad con NCK, si alguien los necesita solo tiene que pedirlos.

Mensaje modificado por pmarrero el Jan 31 2022, 02:42 PM