Alcatel Jitterbug Smart A622gl Frp Con Medusa Pro Opciones

[amilcargo]

Descarga el .srf de ALCATEL modelo A622GL en el soporte medusa pro.

1- selecciona el modelo del dispositivo.
2- dar click en "connect" (depende el idioma) y por medio de un cable EDL 9008 se pone a modo "emergency download" el dispositivo para despues conectarlo normal con un cable usb micro B.
3- ya conectado se entra a la opcion "smart repair" y se siguen los pasos por default del menu.

 Sin_t_tu... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 175.47k ) Número de descargas: 0


al terminar el proceso quedara limpio de FRP.


dejo el registro del proceso:

Model Settings:
Interface : USB
Brand : ALCATEL
Model : A622GL
SRF : C:/Users/VIO/Desktop/ALCATEL_Jitterbug_A622GL_USB.srf
Core : Qualcomm MSM8909
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_009600E1
Core : Qualcomm MSM8909
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 1.24.
P00: GPT (00000000, 00008000) 16 MB
P01: modem (00008000, 00020000) 64 MB
P02: sbl1 (00028000, 00000400) 512 KB
P03: sbl1bk (00028400, 00000400) 512 KB
P04: DDR (00028800, 00000040) 32 KB
P05: aboot (00028840, 00000800) 1024 KB
P06: abootbk (00029040, 00000800) 1024 KB
P07: rpm (00029840, 00000400) 512 KB
P08: rpmbk (00029C40, 00000400) 512 KB
P09: tz (0002A040, 00000800) 1024 KB
P10: tzbk (0002A840, 00000800) 1024 KB
P11: boot (0002B040, 00010000) 32 MB
P12: modemst1 (00040000, 00000C00) 1536 KB
P13: modemst2 (00040C00, 00000C00) 1536 KB
P14: fsg (00041800, 00000C00) 1536 KB
P15: sec (00042400, 00000020) 16 KB
P16: fsc (00042420, 00000002) 1024 b
P17: ssd (00042422, 00000010) 8 KB
P18: tunning (00042432, 00000C00) 1536 KB
P19: traceability (00043032, 00000010) 8 KB
P20: binary (00043042, 00000800) 1024 KB
P21: mobile_info (00043842, 00010000) 32 MB
P22: carrier (00053842, 00040000) 128 MB
P23: expd (00093842, 00004000) 8 MB
P24: splash (00097842, 00001800) 3072 KB
P25: keystore (00099042, 00000400) 512 KB
P26: oem (00099442, 00020000) 64 MB
P27: fota (000B9442, 00000010) 8 KB
P28: redbend (000B9452, 00001830) 3096 KB
P29: misc (000BAC82, 00000800) 1024 KB
P30: cache (000BB482, 00083000) 262 MB
P31: persist (0013E482, 00010000) 32 MB
P32: tct_persist (0014E482, 00010000) 32 MB
P33: custpack (00160000, 00200000) 1024 MB
P34: system (00360000, 00190000) 800 MB
P35: recovery (004F0000, 00007800) 15 MB
P36: pad (004F7800, 00000800) 1024 KB
P37: config (004F8000, 00000400) 512 KB
P38: devinfo (004F8400, 00000800) 1024 KB
P39: userdata (004F8C00, 009973DF) 4.795 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst1_0x40000_0xc00_25_08_2021_18_22_31.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst2_0x40c00_0xc00_25_08_2021_18_22_31.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_fsg_0x41800_0xc00_25_08_2021_18_22_31.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 3538944
Number of sectors : 1638400

---------------------------------------------------------------
Partition table has been found on device.
Repairing from file "C:/Users/VIO/Desktop/ALCATEL_Jitterbug_A622GL_USB.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing modem partition... Done.
Writing sbl1 partition... Done.
Writing sbl1bk partition... Done.
Writing DDR partition... Done.
Writing aboot partition... Done.
Writing abootbk partition... Done.
Writing rpm partition... Done.
Writing rpmbk partition... Done.
Writing tz partition... Done.
Writing tzbk partition... Done.
Writing boot partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing fsg partition... Done.
Writing sec partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing tunning partition... Done.
Writing traceability partition... Done.
Writing binary partition... Done.
Writing mobile_info partition... Done.
Writing carrier partition... Done.
Writing expd partition... Done.
Writing splash partition... Done.
Writing keystore partition... Done.
Writing oem partition... Done.
Writing fota partition... Done.
Writing redbend partition... Done.
Writing misc partition... Done.
Writing persist partition... Done.
Writing tct_persist partition... Done.
Writing custpack partition... Done.
Writing recovery partition... Done.
Writing pad partition... Done.
Writing config partition... Done.
Writing devinfo partition... Done.

Smart Repair is successfully complete.
SW: 2.2.0; FW: 1.24.
Disconnected.

Mensaje modificado por amilcargo el Aug 25 2021, 08:52 PM

[Anunciante Autorizado]

[epcell]

buen aporte, pero no seria mejor una vez conectado ir a tabla de particiones y borrar el frp lo veo mas factible y mas rápido sin escribir nada innecesario.

[lnieto76]

Buenas amigos tengo uno que se me ha quedado en el logo despues del proceso de medusa.