Unlock Alcatel Ot-5006g Aporte Opciones

[xtemplariosx]

se usa ot smart seleconan el modelo corrector ot-5006g y telefono apagado ami me daba un error raro que no podia entrar a liberar hasta que desconecte la bateria y volverla a conectar me detecto el puerto mtk y listo. a cobrar.

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM56)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM56
Connecting;
Downloading DA;
Initializing;
Rid: 32a3a434517d0449db4144e836eea933
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem178.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM25;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x422201F4 0x6E697769 0x00001020 0x9786EB40 [SIZE=0x3AC400000]
IMEI1 [OTP 0000]: 015486-00-079732-8
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5006G-2CTLMX1
USRDATA INFO: 0x118800000 SIZE: 0x28F480000


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;


Locked to [SIM1]: 334-03
code_cat_n: 0000000000000000 enabled: yes tries: 10
code_cat_ns: 0000000000000000 enabled: no tries: 0
code_cat_sp: 0000000000000000 enabled: no tries: 0
code_cat_c: 97887E7900000000 enabled: no tries: 0
code_cat_sim: A000000000000000 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:09

Log file saved to: LOG_14_12_2020_14_53_25.txt

[Anunciante Autorizado]

[zumy]

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5193
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM106)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM106
Connecting;
Downloading DA;
Initializing;
Rid: 0ece9d0004a2ab83a8aa5356bc1c8b76
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem29.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM107;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]88 0x36314439 0xD2AC2447 0x53163635 [SIZE=0x39DC00000]
IMEI1 [OTP 0000]: 39-662-3
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x118800000 SIZE: 0x280C80000


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;


Locked to [SIM1]: FFF-FF
code_cat_n: 0000000000000000 enabled: no tries: 10
code_cat_ns: 0000000000000000 enabled: no tries: 10
code_cat_sp: 0000000000000000 enabled: no tries: 10
code_cat_c: 97887E7900000000 enabled: no tries: 10
code_cat_sim: 0000000000000000 enabled: no tries: 10
code_cat_ns_sp: 0000000000000000 enabled: no tries: 5
code_cat_sim_c: 0000000000000000 enabled: no tries: 5

Phone unlocked; Remove battery and cable;

Time needed - 00:00:36

Log file saved to: LOG_23_12_2021_15_03_42.txt

a cobrar y mucho mas facil que la sigma key