ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Firmware Hiking Hk-mh501 Leida Con Nck
misaelrm
mensaje May 14 2020, 12:10 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 62
Agradecimientos: 234
Registrado: 30-December 16
Desde: oaxaca
Miembro No.: 909,852
Pais:mx


firmware leida con nck HiKING HK-MH501



BACKUP HiKING HK-MH501
Selected 0-By CPU:MT6580
Exe version: NCKBox AndroidMTK 2.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM20)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SANDISK 0x444734303038
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 450100444734303038 : 00000000000000
EMMC UA SIZE: 0x1d21d0000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2dd0000 [7.295 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM16)
Build ID: O11019
Display ID: Y8393.HDL.C103.8+1.8.1.B1B2B5.V06.20180717
Version: 8.1.0
Model: HK-MH501
Brand: HIKING
Device: HK-MH501
Manufacturer: Joyar
IMEI[1]: 3528350
IMEI[2]: 3528350
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: lk2
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: odmdtbo
Partition: expdb
Partition: vendor
Partition: frp
Partition: tee1
Partition: tee2
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: sdrpmb
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 352835
IMEI[2] from NVRAM: 352835
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing odmdtbo odmdtbo.img
Reading: BEGIN: 0x4600000 - LEN: 0x1000000
Start processing vendor vendor.img
Reading: BEGIN: 0x6000000 - LEN: 0x12000000
Start processing frp ......
Reading: BEGIN: 0x18000000 - LEN: 0x100000
Start processing trustzone
Start processing nvdata ......
Reading: BEGIN: 0x18b00000 - LEN: 0x2000000
Start processing secro secro.img
Reading: BEGIN: 0x1d200000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0x1e000000 - LEN: 0x4c800000
Saved to : C:\Users\user\Documents\Android_MTK\firmware_backup\MT6580_EMMC_O11019__8_1_0_HK-MH501_HIKING_2020_05_14_10_57)
Wait untill phone will start charging.
[0]All done.
 
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 usuario(s) está(n) leyendo este tema (1 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 12th May 2026 - 11:56 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +