Lmx420emw Brick DespuÉs De Unlock ¡ayuda! Opciones

[samjnsk]

Bienvenido en Octoplus/Octopus Box LG Software version 3.0.1
--------------------------------------------------------------------------------
Connecting to server ...OK
Username:
Authorizing...¡Error!
Login error: Wrong username!
--------------------------------------------------------------------------------
Connecting to server ...OK
Username: machin967_31
Authorizing...OK
Checking balance...OK
Your balance: 100 credits.
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG MTK
Puerto seleccionado: COM9
Velocidad seleccionada: 921600
Modelo seleccionado: X420EMW
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable
(with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and
connect Micro USB cable.
Phone found at port COM43
Mode: Emergency
Initializing flash...OK
Model ID: LM-X420EMW
Plataforma: mt6765
Android version: 9
Versión de SW: LMX420EMWAT-64-V20c-EEA-XX-NOV-29-2019+0
LAF Version: 1.1
Product ID: 964GAD29B6J7006D5
IMEI: 353615-10-285515-0
Target operator: LAO
Hardware: rev_11
Battery level: 47%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI A: 353615-10-285515-0
IMEI B: Bad
Dirección de Bluetooth: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Unlock operation - you won't be able to restore the phone to it's
initial state, so proceed at your own risk.

Continue?
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: machin967_31
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Liberación...OK
Escritura de la zona de seguridad...OK
Removing write protection...OK
Reconnecting phone...
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power"
buttons.
3. Hold "Vol+" until phone enter in Download mode, then press
"OK" button.
Phone found at port COM43
Mode: Emergency
Initializing flash...OK
Borramiento part 1...OK
Reconnecting phone...
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power"
buttons.
3. Hold "Vol+" until phone enter in Download mode, then press
"OK" button.
Phone found at port COM43
Mode: Emergency
Initializing flash...OK
Borramiento part 2...OK
¡El teléfono está liberado con éxito!
Please, reboot the phone manually.
Performed by 3.0.1 Software version.



acabo de hacer el proceso para liberar un k40 y se brickeo. estoy tratando de flashearlo para poder revivirlo ¿el proceso unlock permanece después del flasheo?
si alguien pudiera aclararme esa duda se lo agradecería. gracias.