Frp Nuu Mobile A1 Con Nck Dongle Opciones

[Edvin Alonzo]

Si ya esta posteado favor de borrarlo

Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

Luego hacer Hard Reset y listo

[Anunciante Autorizado]

[botycell]

Si ya esta posteado favor de borrarlo

Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

Luego hacer Hard Reset y listo

si dieras una explicacion del proceso fuera mejor pana, por que simple log, no es suficiente en algunos casos.

gracias.

[pmarrero]

si dieras una explicacion del proceso fuera mejor pana, por que simple log, no es suficiente en algunos casos.

gracias.

Perfecta explicación

* Dispositivo que llegó solicitando cuenta Google (FRP)

01- Abrir el Software NCK y realizar lectura para identificar correctamente el dispositivo, ir a la pestaña Main y presionar Read Phone in flash mode, y conectar el móvil apagado

Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.7.4
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(48) : MediaTek PreLoader USB VCOM (Android) (COM48)
[48] \\?\usb#vid_0e8d&pid_2000#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(56) : MediaTek DA USB VCOM (Android) (COM56)
[56] \\?\usb#vid_0e8d&pid_2001#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[system]Reading info, wait...
Build ID: MRA58K
Display ID: MRA58K dev-keys
Version: 6.0
Model: NUU_A1
Brand: NUU
Device: NUU_A1
Manufacturer: NUU
Mediatek Version Release: alps-mp-m0.mp1-V2.34_b6580.weg.a.m
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
This phone have FRP partition.
IMEI[1]: 354699081154826
IMEI[2]: 354699081354871
Wait untill phone will start charging.
[0]All done.

02- Ir a la pestaña FRP-Pattern-Privacy y marcar Wipe userdata y accionar el botón FRP

Exe version: NCKDongle AndroidMTK 2.7.4
Selected model: 0-By CPU MT6580
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(48) : MediaTek PreLoader USB VCOM (Android) (COM48)
[48] \\?\usb#vid_0e8d&pid_2000#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Resetting userdata.
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

03- Configurar, realizar hard reset desde adentro, volver a configurar y listo