Frp A520 Opciones

[cold45]

FRP Blade A520 (V7)

Using library Brom_DLL_v7.1712.1
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM25))
Preparing to start flash mode;
Preparing to open COM25
Connecting;
Downloading DA;
Initializing;
Rid: c77421e9baa28b52b0b998188f1e3470
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem113.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM27;
DEVICE INFO:
BB CHIP: MT6753 [CA00, 00, 337, FF]
HW_STORAGE_EMMC: 0x484A0190 0x65324741 0x17040705 0x5193290C [SIZE=0x3AC400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xD7800000 SIZE: 0x2D2F80000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_19_10_2017_22_03_40.txt