(aporte) Liberar Alcatel 4034a (nck Box Pro) Opciones

[Brhyan8]

Bueno compañeros aquí les traemos este aporte
1).abrimos la plataforma MTK de NCK
2).seleccionamos el modelo Alcatel luego modelo 4034A
3).hacemos clip en la pestaña Unlock luego en Direct unlock
4). apagado el celular conectamos y esperamos unos segundos.
5).encendemos con el chip de la banda contraria y listos.

OJO: no es necesario colocar el código que da al final automáticamente la NCK lo hace.

Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM34)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E3132 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM36)
OTP IMEI: 0145270xxxxxxxx
MODEL FROM PROINFO: 4034A-2AAVHN1
SECRO FROM PROINFO: X3D0NT01BS10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) Code : 5365242124416419
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
Wait untill phone will start charging.
All done.

[Anunciante Autorizado]

[gezer047]

Ya hay otro tema sobre el mismo proceso
https://www.clangsm.com/forum/index.php?showtopic=459203