Aporte Quitar Contrasena Redmi Note 3 Con Unitool Opciones

[movilGSM]

Hola amigos del clan, aqui les dejo mi experiencia para quitarle la contrassena a un Xiami Redmi note3 con Unitool. Este modelo no soporta hard reset por botones, solo flasheando. Pero bueno asi fuel como salio:

Primero: Poner el telefono en modo qualcomm (En teoria con el telf apagado presionar los 2 botones de volumen y conectar el usb) Pero yo use un cable EDL.
Despues instalar los drivers que viene conla Unitool. Una vez que los drivers esten bien abrimos unitool en la pestana "MI" le damos leer informacion y selecionamos CPU Qualcomm MSM8956. Una vez leida la info. Volvemos a conectar y le damos a "Leer Flash" (Por si Acaso) y por ultimo vamos a la opcion "Formatear" Se demo ra un poco en arrancar despues pero no se preocupen que sale.
Aqui les dejo los logs:

CÓDIGO

1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
  Some phones need to use edl cable or special card slot.
10:21:32 Port Found[COM50].
10:21:37 Waiting for flash programmer to boot.
10:21:48 Name: kenzo
10:21:48 Brand: Xiaomi
10:21:48 Device: kenzo
10:21:48 Release Version 6.0.1
10:21:48 BaseBand CPU: msm8952
10:21:48 Project Version: MMB29M
10:21:48 Ext Info: Redmi Note 3
10:21:52 Reading Pattern Lock...
10:21:59 Not Find Pattern Lock.
10:27:46 Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
  Some phones need to use edl cable or special card slot.
10:27:46 Port Found[COM50].
10:27:51 Waiting for flash programmer to boot.
10:28:02 Name: kenzo
10:28:02 Brand: Xiaomi
10:28:02 Device: kenzo
10:28:02 Release Version 6.0.1
10:28:02 BaseBand CPU: msm8952
10:28:02 Project Version: MMB29M
10:28:02 Ext Info: Redmi Note 3
10:28:02 Reading modem...
10:28:10 Reading fsc...
10:28:11 Reading ssd...
10:28:12 Reading sbl1...
10:28:14 Reading sbl1bak...
10:28:15 Reading rpm...
10:28:16 Reading rpmbak...
10:28:18 Reading tz...
10:28:19 Reading tzbak...
10:28:21 Reading hyp...
10:28:22 Reading hypbak...
10:28:23 Reading dsp...
10:28:26 Reading modemst1...
10:28:27 Reading modemst2...
10:28:29 Reading DDR...
10:28:30 Reading fsg...
10:28:31 Reading sec...
10:28:33 Reading splash...
10:28:35 Reading aboot...
10:28:36 Reading abootbak...
10:28:38 Reading boot...
10:28:44 Reading recovery...
10:28:50 Reading devinfo...
10:28:51 Reading system...
10:32:08 Reading cache...
10:32:10 Reading persist...
10:32:13 Reading misc...
10:32:15 Reading keystore...
10:32:16 Reading config...
10:32:17 Reading oem...
10:32:24 Reading limits...
10:32:25 Reading mota...
10:32:26 Reading devcfg...
10:32:28 Reading dip...
10:32:29 Reading mdtp...
10:32:33 Reading cust...
10:33:13 Reading syscfg...
10:33:15 Reading mcfg...
10:33:16 Reading cmnlib...
10:33:17 Reading keymaster...
10:33:19 Reading cmnlibbak...
10:33:20 Reading keymasterbak...
10:33:21 Reading apdp...
10:33:23 Reading msadp...
10:33:24 Reading dpo...
10:33:26 Reading userdata...
10:33:28 Storage Path:C:\VolcanoBox\UniTool_Vol\msm8952_Xiaomi_kenzo_6.0.1_MMB29M
10:36:37  Fail
23:46:26 Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
  Some phones need to use edl cable or special card slot.
23:46:26 Port Found[COM50].
23:46:30 Waiting for flash programmer to boot.
23:46:41 Name: kenzo
23:46:41 Brand: Xiaomi
23:46:41 Device: kenzo
23:46:41 Release Version 6.0.1
23:46:41 BaseBand CPU: msm8952
23:46:41 Project Version: MMB29M
23:46:41 Ext Info: Redmi Note 3
23:46:44 Reading Pattern Lock...
23:46:51 Not Find Pattern Lock.
23:49:23 Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
  Some phones need to use edl cable or special card slot.
23:49:23 Port Found[COM50].
23:49:27 Formatting...
23:49:33 Format Sucess,Wait until phone restart.
If phone does not restart automatically,do it manually.
00:17:22 Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
  Some phones need to use edl cable or special card slot.
00:17:28 Please wait while stopped.
00:17:32 The user stops the operation.

Saludos

[Anunciante Autorizado]

[starcel]

no encuetro los drivers que mensionas amigo podrias subirlos

[oscar78725]

Sonlos mismos de medusa qualcomm 9008

[josepuc]

Podrias subir tu backup compañero?