Liberar Ot-4014a Aporte Opciones

[miguel168]

liberar alcatel ot-4014a usar nckdongle androidMTK 2.5.6.7
seleciona el modelo y read info (code) y listo.


Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.7
Selected model: OT-4014A
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM47)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) MICRON 0x50314a39344d
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39 : 000000000000000000
EMMC UA SIZE: 0xe9800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9b00000 [3.651 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM73)
OTP IMEI: 014433000
MODEL FROM PROINFO: 4014A-2AC9JM1
SECRO FROM PROINFO: X5B0N601AZ10
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:5) Code : 8872449834407515
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.