No La He Podido Activar Opciones

[caseresjimenez24]

Hermanos del Clan desde ayer estoy luchando con este jugetito nuevo que me trajeron, Bueno es primera ves que la voy a usar ya instale el cyclone installer 1.10, la reguistre, todo ok, pero cuando maintenance box me sale lo siguiente:

Updating Security Area...
Security Area Update Skipped, Not allowed
Updating Main Firmware...
Main Firmware Update Skipped, Not allowed
Updating COM Emulator Firmware...
COM Emulator Update Skipped, Not allowed
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
CBUS Request Error -> CBUS Problem, Lost handle (Write Pipe)
Box Firmware Version Read Failed -> No answer from CBUS
Failed to Upgrade Bootloader -> Failed to read Box Firmware Version - Try to Maintenance Box
Secure Bootloader Update Skipped, Not allowed or not needed
Disconnected from Cyclone Server
Box Maintenance finished successfully

y se desconecta, luego la conecto de nuevo y en card maintenance sale el siguiente error:

Started card reading procedure at 13:02:47
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Checking for card presence...
CBUS Request Error -> CBUS Problem, Lost handle (Write Pipe)
Security Card Reset Error -> No answer from CBUS
Card reading error -> Security card was not found!

que pudiese ser el error
La verdad porque hasta ahora estoy con esta cajita, solo me vino un cable GPG adapter y la box y nada mas, quiero saber si trae otro accesorios.

Mensaje modificado por caseresjimenez24 el Apr 8 2011, 04:13 PM

[Anunciante Autorizado]

[rosa808]

mira a ver si te sirve esto

http://www.4shared.com/account/file/RdCD-V...n_cyclone_.html

[caseresjimenez24]

mira a ver si te sirve esto

http://www.4shared.com/account/file/RdCD-V...n_cyclone_.html

Updating Security Area...
Security Area Update Skipped, Not allowed
Updating Main Firmware...
Main Firmware Update Skipped, Not allowed
Updating COM Emulator Firmware...
COM Emulator Update Skipped, Not allowed
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
CBUS Request Error -> CBUS Problem, Lost handle (Write Pipe)
Box Firmware Version Read Failed -> No answer from CBUS
Failed to Upgrade Bootloader -> Failed to read Box Firmware Version - Try to Maintenance Box
Secure Bootloader Update Skipped, Not allowed or not needed
Disconnected from Cyclone Server
Box Maintenance finished successfully

y se desconecta, luego la conecto de nuevo y en card maintenance sale el siguiente error:

Started card reading procedure at 13:02:47
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Checking for card presence...
CBUS Request Error -> CBUS Problem, Lost handle (Write Pipe)
Security Card Reset Error -> No answer from CBUS
Card reading error -> Security card was not found!

Me marca esos errores hice todo lo del manual pero mesale ese error

[jocasa]

Estamos en las mismas condiciones hermano, yo ya son 5 dias con ella y nada que logro que pase del mismo problema, a lo mejor es algo del server, si lo logras me avisas porfa.

Mensaje modificado por jocasa el Apr 9 2011, 12:16 AM

[caseresjimenez24]

Estamos en las mismas condiciones hermano, yo ya son 5 dias con ella y nada que logro que pase del mismo problema, a lo mejor es algo del server, si lo logras me avisas porfa.

Luchando todavía y nada de nada. Tenes razón puede ser el server toca esperar.

[arnoldo0945]

jocasa & caseresjimenez24

pasen por este tema, y hagan lo que se indica:

http://www.clangsm.com/forum/index.php?sho...=185846&hl=

Saludos

[rosa808]

baja el ultimo instalador la 1.11

[caseresjimenez24]

baja el ultimo instalador la 1.11

Ya lo baje y lo mismo, la voy a mandar al revendedor porque talves puede ser problema de la card

[jocasa]

Nada, eh intentado de todo y mic cyclone con el mismo problema

[jocasa]

aqui mi log, dice que ya esta registrada, pero a la hora de hacer el proceso en el que cambia a main mode me genera el siguiente error.


Box SN: xxxxxxx
HW Revision: C, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2010, wk44
Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
============================
Updating Security Area...
Security Area Update Skipped, Not allowed
Updating Main Firmware...
Main Firmware Update Skipped, Not allowed
Updating COM Emulator Firmware...
COM Emulator Update Skipped, Not allowed
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader]
Failed to Upgrade Bootloader -> No connection was established, or box is not in needed mode
Secure Bootloader Update Skipped, Not allowed or not needed
Disconnected from Cyclone Server
Box Maintenance finished successfully

[rarogove]

abran nokia tool y luego administrador de dispositivos y actualizar drivers desde la carpeta cyclone. la caja tiene dos drivers uno es para modo boot y el otro para main mode, creo que con esto se les solucionan sus problemas. si no comenten y les ago algo mas detallado

[Eliminado_julioalbertojimenez_*]

Hola Amigos yo tengo instalada la version 1.10 y mi Cyclone trabaja a la prefección pero con la ultima versión 1.12, cuando le doy BoxMaintenance.

Log del primer upgradeo con 1.10

Box Maintenance procedure started at 3:33:28 pm
Handling device: [Cyclone Team], [Cyclone Bootloader]
Bootloader: Cyclone Secure Bootloader v2.13, (Oct 5 2010 17:21:58), Type: Signed Production Application, Added Clip Support
Service Tag: 6D5DAA0B75D666CEF872CB6969779E34
Connecting to Cyclone Server
Cyclone Server (1.0.0.656), Cyclone Box Team 2008-2011 - Ready. Happy Eid Milad un Nabi
========= Box Info =========
Box SN:
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk40
Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN:
First Name:
Surname:
Nickname:
Address:
Country:
E-Mail:
Reseller: GPGIndustries, China
Warranty Start Date: 2010-02-05
Warranty Period (months): 6
Warranty Stop Date: 2010-08-05
Warranty active: No
============================
Updating Security Area...
Security Area Updated, Took: 0.125s
Updating Main Firmware...
Main Firmware Updated, Took: 15.391s
Updating COM Emulator Firmware...
COM Emulator Firmware Updated, Took: 1.281s
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader]
Failed to Upgrade Bootloader -> No connection was established, or box is not in needed mode
Secure Bootloader Update Skipped, Not allowed or not needed
Disconnected from Cyclone Server
Box Maintenance finished successfully

Luego de Eso le instale el driver que me pide y volvi a upgradear

y me dio esto:

Box Maintenance procedure started at 3:41:54 pm
Handling device: [Cyclone Team], [Cyclone Box]
Handling device: [Cyclone Team], [Cyclone Bootloader]
Bootloader: Cyclone Secure Bootloader v2.13, (Oct 5 2010 17:21:58), Type: Signed Production Application, Added Clip Support
Service Tag: 6D5DAA0B75D666CEF872CB6969779E34
Connecting to Cyclone Server
Cyclone Server (1.0.0.656), Cyclone Box Team 2008-2011 - Ready. Happy Eid Milad un Nabi
========= Box Info =========
Box SN:
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk40
Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN:
First Name:
Surname:
Nickname:
Address:
Country:
E-Mail:
Reseller: GPGIndustries, China
Warranty Start Date: 2010-02-05
Warranty Period (months): 6
Warranty Stop Date: 2010-08-05
Warranty active: No
============================
Updating Security Area...
Security Area Updated, Took: 0.125s
Updating Main Firmware...
Main Firmware Updated, Took: 15.375s
Updating COM Emulator Firmware...
COM Emulator Firmware Updated, Took: 1.297s
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Firmware: Cyclone Nokia Application v01.58, (Mar 28 2011 11:13:30, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, © KarwosSoft 2011 wk9
Boot Agent: Cyclone Secure BootAgent Server v3.01 © KarwosSoft 2010 wk41
Cyclone Server Send Command Error -> Code: 500, Not allowed to Upgrade Bootloader

Failed to Upgrade Bootloader -> Server Transaction Failed
Secure Bootloader Update Skipped, Not allowed or not needed
Disconnected from Cyclone Server
Box Maintenance finished successfully

Pero con la ultima version no me trabaja

al parecer es algun bug de error en el servidor alguna persona con el mismo problema pueda dar su opinión o es posible que necesite bajar la 1.11 y upgradear y luego hacerlo con la 1.12. no creo que tenga nada que ver si alguien sabe como se puede hacer le dice. yo postearé en cuanto tenga solución

Saludos

aqui debajo pongo lo que dice la ultima version de cyclonebox

=====================
Installer v1.12
09.03.2011
=====================
- Firmware v1.55 introduced - RAP4 CMT Booting (Wrong first char) fixed
- Added SP unlock via server / log2cod reading
- Added standalone SX4 auth
- Added standalone Superdongle Keys Repair
- Supported phones:
- RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
- RAP4 Based: 3710, 5330, 7230, 6303i, X3
- Minor changes and bugfixes

=====================
Installer v1.11
07.03.2011
=====================
- New BB5 FBUS/USB Loaders v10.48.1 introduced
- DCT4/BB5 Product/Variant caching added. Saves lot of time when selecting correct Datapackage. This is done automaticcly. During Deletion or Installing some of DP, cache is rebuilt automatically on user demand.
- XGold2 USB Flashing Introduced (C1-01,C1-02,C2-00,...)
- Added XGold2 RPL Backup (including CCC,HWC,NPC,Simlock) - FIRST in the world. The backup is created automatically during flash.
- Added XGold2 RPL Write (CCC,HWC,NPC and Simlock) seems FIRST in the world. In order to write RPL file, you need flash your phone and add RPL file as secondary flashing Image (Add XGold2 RPL button).
- XGold2 RPL Contains FULL phone security, possible to Full restore after Flash Chip change
- Added XGold1 Unlocking by Reading LOG2COD Log file
- Added XGold1 Low-Level PM Dumping (both Secured and Nonsecured areas), seems 1st in world
- Added XGold1 Low-Level RPL Backup, seems 1st in world
- XGold1 Backed-up RPL file might be used to completly Re-Initialize phone security, i.e. after flash-chip change (RPL Contains IMEI and Simlock Block), seems 1st in world...
- Both XGold1 Low Level dumps support dead phones (phone might be dead, Cyclone will binary dump PM from flash chip directly)
- Added XGold1 Low-Level Deleted PM Keys dumping (extra option-don't write back readen PM file with deleted keys, they are ASCII marked as deleted ones). Support deleted messages, contacts, ..., seems 1st in world
- Added XGold1 FBUS/Keyboard SL Bad Entries Counter reset, seems 1st in world
- Reading XGOLD1 LOG2COD is fully standalone, seems 1st in world
- XGold1 Unlock/RPL supported mobiles: 1616, 1280, 1208, 1209, 1800, C1-00, and others...
- Added "Mapped At" FlashChip information during XGold Flashing, when possible
- Added "Sector Size" FlashChip information during XGold Flashing, when possible
- No reboot flashing for XGold added
- APE block flashing fixed for various RAPIDO mobiles
- Fixed Old Protocol (Dead) USB Flashing (RAPIDO phones: N86,etc)
- Fixed Blackberry Module - upon reading MEP via USB it was placing it on wrong window
- Assigned COD files are now verified before sending to server, the auxiliary verification also takes place at Server Side
- Fixed OpenDialog filter when adding DCT4/BB5 flash file
- log2cod: v1.1 Released
- log2cod: GPU Selftests added (some GPU find bad code, or didn't find anything at all)
- log2cod: Added Ivan Golubev EULA
- log2cod: Added Queue managment
- log2cod: Code Verification added after successfull calculation
- log2cod: Console is cleared after some salts processed in order to avoid overflow
- log2cod: PeekNamedPipe() problem fixed
- log2cod: Added queue processing in loop mode (you can add new jobs during calculation)
- The transaction bar have been a bit resized
- Cyclone Box HW Rev B11x, C11x added
- Models.ini updated
- Box USB Drivers updated to v1.0.0.6 - they are digitally signed now, no more problems on Win7 / Win Vista x64
- COM Emulation Service Driver updated to v1.0.0.1 - it is digitally signed now, no more problems on Win7 / Win Vista x64
- Main Software is now Digitally Signed (Authenthicode)
- log2cod is now Digitally Signed (Auhtenthicode)
- Cyclone Calculator is now Digitally Signed (Authenthicode)
- Installer is now Digitally Signed (Auhtnethicode)
- New phones added to Virgin SX4 Database
- New phones added to Security Database (Virgin RPL)
- Box Firmware v1.53 Released
- Some minor and major changes and bugfixes
- Versions snap
Installer v1.11
Main x86 Application v1.0.0.11003
x86 Memory Manager v4.76.0.179
Native USB Drivers v1.0.0.6
USB-COM Stack Drivers v1.0.0.1
Onboard Secure Bootloader v2.13
Onboard Main Nokia Application v1.53
Onboard COM Emulation Code v1.00
Onboard Security Card Revision v1.10
Nokia Connectivity Cable Drivers 7.1.34.0
BB5 USB/FPIF Single Line/FPIF DualLine v20110301
DCT4 FPIF Single Line/USB v20100410
DCT4 Unlock Patches DEPRECATED
Communication Stack SSLv3-keys-06092008
Skin Stack v7.21